Page History
Add_workflow_for_techpubs | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
|
Include Page | ||||
---|---|---|---|---|
|
Panel | ||||
---|---|---|---|---|
In this section:
|
Include Page _SBC 5100 5200 Unsupported _SBC 5100 5200 Unsupported
Include Page | ||||
---|---|---|---|---|
|
Excerpt Include | ||||||
---|---|---|---|---|---|---|
|
Include Page | ||||
---|---|---|---|---|
|
System
Command Syntax
The command syntax of the objects related to the show table system
command is shown below.
Code Block | ||
---|---|---|
| ||
show table system activeConfigFile activeRevision admin announcements baseMacAddress bfdSessionStats clusterAdmin configMode congestion coredumpList coredumpSummary cpuTranscodeStatus cpuUtilCurrentStatistics cpuUtilIntervalStatistics databaseIntegrity daughterBoardAdmin daughterBoardStatus dodModeStatus dsbc dspPad dspRes dspStatus ems ethernetPort fanStatus fileStatisticsAdmin fileStatisticsStatus fipsFSMState gpuStatus gpuTranscodeStatus haConfig hardDiskStatus hardDiskUsage highAvailabilityPort intervalStatistics ipPolicing isOAM jsrcServer ledStatus licenseDomainBundleInfo licenseInfo licenseNodeLockedBundleInfo licenseRequired licenseStatus loadBalancingService logicalMgmtIpInterface logicalMgmtIpInterfaceStatus macAddressStatus media mediaProfile memoryUtilCurrentStatistics memoryUtilIntervalStatistics metavariable metaVariableDynamic mgmtIpInterfaceGroup mgmtStaticRoute networkProcessorStatistics niceLicense ntp objectStoreParameters pathCheckPath pdcsLicense policyServer powerSupplyStatus rgStatus savedConfigList sbcliLicense sbcPersonalityStatus security serverAdmin serverSoftwareUpgradeStatus serverStatus serviceDiscovery slb softwareUpgradeDetailedStatus softwareUpgradeStatus standbySyncStatus sweActiveProfile sweCapacityEstimate sweCodecMixProfile sweConfigProfileSelection sweProcessorCapacity sweTrafficProfiles syncStatus systemCongestionCurrentStatistics systemCongestionIntervalStatistics systemCongestionStatus transcodeInfo transcodeType |
Command Parameters
Table 1: Shared Common Parameters - 'show status system' and 'show table system'
Parameter | Description | ||||||||
---|---|---|---|---|---|---|---|---|---|
activeConfigFile | Displays the file name of the last retrieved file from the external object store service. | ||||||||
activeRevision | Numeric identifier for the active configuration revision level. (SBC SWe N:1 HA deployments only) The revision number is incremented when executing the CAUTION: In certain scenarios, a managed node is unable to apply changes due to unexpected configuration conflicts or network error conditions. Such situations trigger a sonusSbxManagedNodeUnableToReceiveConfigUpdates alarm and set the | ||||||||
| Basic configuration (name, location, etc) for the system. See Admin Attributes table below for details. | ||||||||
| Announcement file status and statistics. See Announcements Attributes table below for details. | ||||||||
| Displays base MAC address of servers.
| ||||||||
bfdSessionStats | Displays the status of the active BFD sessions.
| ||||||||
clusterAdmin | Displays cluster-specific configuration details.
| ||||||||
configMode | Indicates the configuration mode for the node.
| ||||||||
| System congestion profile for the node.
| ||||||||
| List of core dumps on the server(s). Fields include:
| ||||||||
| Summary of core dump files on server(s).
| ||||||||
cpuTranscodeStatus | Available only on SWe except S-SBC SWe. See CPU Transcode Status for details. | ||||||||
| The CPU utilization of the server for the current period.
| ||||||||
| The CPU utilization for the 'n' number of intervals.
| ||||||||
databaseIntegrity | Displays SBC database sync status from executing the The following command options are available to match the results of the 'show' command with the associated 'request' command: activeAndStandbyPolicy – Display results of the sync check against policy databases on the active and standby servers. Displayed results include the following fields:
| ||||||||
| SBC 7000 daughter board administrative status from server/CE level.
NOTE: Not applicable for 5x00 or SWe systems. | ||||||||
| Server Daughter Board (DB) status details. See Daughter Board Status Attributes table below for details. | ||||||||
dodModeStatus | DoD mode status details, with following details:
| ||||||||
dsbc | Distributed SBC (D-SBC) statistics details.
| ||||||||
| DSP PAD configuration service (must be restarted for new configuration to take effect). See DSP PAD Attributes table for details (for 'show table system' command only). | ||||||||
| DSP historical interval statistics. See DSP Resources Attributes table below for parameter details.
| ||||||||
| Status of DSP resources. See DSP Status Attributes table below for details. | ||||||||
ems | EMS-specific configuration.
Applies to SBC SWe systems only. | ||||||||
| Configuration for management, packet, and field service Ethernet ports. See Ethernet Port Attributes table for details. | ||||||||
| Fan status on the server(s).
| ||||||||
fileStatisticsAdmin | Displays whether the following interval statistics are enabled/disabled to write data to the statistics file.
| ||||||||
| Displays the current ID of the last performance statistics data written to the database. | ||||||||
fipsFSMState | FIPS finite state machine state.
| ||||||||
gpuStatus | SWE only. Returns server name and GPU number for each attached GPU. See GPU Status table for details. | ||||||||
gpuTranscodeStatus | Returns GPU codec channel capacities. Available only on SBC SWe except S-SBC SWe. See GPU Transcode Status for details. | ||||||||
haConfig | This statistic displays GRHA status details.
| ||||||||
| Hard disk status on the server(s).
| ||||||||
| Hard disk usage on the server(s).
NOTE: The role of the standby server is reflected as Primary for the root partition because the other partition, /var/log/sonus/sbx/evlog is not mirrored/mounted in the standby CE until a switch-over occurs and the Standby assumes the role of active. | ||||||||
| Configuration and status for the HA ethernet ports.
| ||||||||
| The system- wide settings for interval statistics.
| ||||||||
| The MIB Module for IP Monitoring statistics. These statistics are divided into three categories: Offenders List/Offenders Interval statistics, Micro Flow statistics and System statistics. Some or all of the following fields appear in the Offenders List/Offenders Int Stats statistics, depending on the type:
Offenders Lists: (See Offenders Lists for additional details about each type of list)
Offenders Interval Statistics:
Micro Flow statistics:
NOTE: This command displays any micro flow entry regardless of whether SIPFE or MRM (or any sub-system) created the micro flow. System statistics:
| ||||||||
isOAM | Indicates whether the node is an OAM node.
| ||||||||
| JSRC server configuration.
| ||||||||
| Displays status of various LEDs of the server.
| ||||||||
licenseDomainBundleInfo | License details for the domain licenses available on the SBC. See License Attributes table for details. | ||||||||
| The license status for registered license features. See License Attributes table for details. | ||||||||
licenseNodeLockedBundleInfo | License details for the node-locked licenses stored on the
| ||||||||
licenseRequired | Displays the (Applies to 'show table' command only) | ||||||||
| The CE license status table describes the current CE license state, for example " | ||||||||
| The Load Balancing Service status/statistics details with the following fields. See one of the following tables, as applicable, for details: | ||||||||
| The logical management IP interface status/statistics details with following fields:
| ||||||||
| The Logical Mgmt IP Interface status status/statistics details with following fields:
| ||||||||
macAddressStatus | Displays MAC addresses of the system server(s).
| ||||||||
| System- wide media configurations, UDP port range and RTP/RTCP peer inactivity timeout.
| ||||||||
| DSP Media Profile configuration. (The System Media Profile configuration applies to hardware platforms (5400 series, 7000) only.)
| ||||||||
| The memory utilization for the current interval period. Fields include:
| ||||||||
| The memory utilization for the 'n' number of intervals.
| ||||||||
metaVariable | Displays the system dynamic metavariable names and values.
| ||||||||
metaVariableDynamic | Displays user-configured metavariables that add to the metadata available to an existing SBC SWe N:1 HA or cloud-based deployment.
| ||||||||
| A group of management IP interfaces for the default address context. See Mgmt IP Interface Group Parameters table below for details. | ||||||||
| Static IP routes for this address context.
| ||||||||
networkProcessorStatistics | NOTE: For internal debug use only. Network Processor statistics details.See Network Processor Attributes table below for details. | ||||||||
niceLicense | Reports whether the SBC NICE recording feature is dependent on the setting for the feature within the SBC's license. For deployments that upgraded and were already using the legacy license model, this status is set to "true" automatically and access to the NICE recording feature is maintained without the need to install a new license. If the status is set to "false" your installed license must have NICE recording explicitly enabled to enable the feature. | ||||||||
| NTP services management details. See NTP Attributes table below for details. | ||||||||
objectStoreParameters | Parameters used to specify an object store service to upload or download a configuration file ( SBC SWe cloud-based deployments only) | ||||||||
pathCheckPath | Path for ICMP ping mechanism
NOTE: This field applies to the 'show table' command only. | ||||||||
pdcsLicense | Reports whether the SBC feature which enables lawful call interception based on receipt of a SIP P-DCS-LAES header is dependent on the setting for the feature within the SBC's license. For deployments that upgraded and were already using the legacy license model, this status is set to "true" automatically and access to the P-DCS-LAES feature is maintained without the need to install a new license. If the status is set to "false" your installed license must have the P-DCS-LAES feature explicitly enabled to enable the feature. | ||||||||
| Softswitch servers and client services status/statistics details. See Policy Server Attributes table below for details. | ||||||||
| Power consumption/state of the server.
| ||||||||
rgStatus | Displays the status of the instances in a redundancy group. NOTE: This command applies to N:1 redundancy configurations only. | ||||||||
| List of configurations saved on the system.
| ||||||||
sbcliLicense | Reports whether the SBC feature which enables lawful interception (LI) service using ERE is dependent on the setting for the feature within the SBC's license. For deployments that upgraded and were already using the legacy license model, this status is set to "true" automatically and access to the feature is maintained without the need to install a new license. If the status is set to "false" your installed license must have the LI feature explicitly enabled to enable the feature. | ||||||||
sbcPersonalityStatus | Displays the personality role of the
| ||||||||
| Security management status/statistics details. See Security Attributes table for details. | ||||||||
| The serverAdmin table describes the configuration of each server module.
| ||||||||
| The system server software upgrade status table describes the status of the server software upgrade module.
| ||||||||
| The system server status table provides status of the server module.
| ||||||||
serviceDiscovery | The settings for the Service Registry and name server used to resolve FQDNs as part of Service Discovery. Refer to Service Discovery for Trap Target Destinations and RAMP Registration.
| ||||||||
slb | SIP-aware front-end Load-Balancer (SLB) configuration. See SLB for details. | ||||||||
softwareUpgradeDetailedStatus |
| ||||||||
| LSWU status at any given time with the following details.
| ||||||||
standbySyncStatus | Sync status details of the standby node for active nodes created through a N:1 redundancy group configuration.
| ||||||||
| HA Redundancy: Sync status of both the active and standby nodes for an SBC HA pair.
N:1 Redundancy: Sync status of both the active and standby nodes created through a N:1 redundancy group.
| ||||||||
| The System Congestion Current Statistics table details.
| ||||||||
| The System Congestion Interval Statistics details.
| ||||||||
| System Congestion status status/statistics details.
| ||||||||
transcodeInfo | (Available only on SWe except S-SBC SWe)
| ||||||||
transcodeType | (Available only on SWe except S-SBC SWe) Shows type of transcode information used (CPU, GPU, CPU + GPU, HWDSP). This is system level information and shows only one entry in case of HA system. |
Include Page | ||||
---|---|---|---|---|
|
Admin
Command Syntax
Code Block |
---|
> show table system admin <system name> |
Command Parameters
Table 2: Admin Attributes
Parameter | Description | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
<system name> | System name | ||||||||||||||||
accountManagement | Account and password management-related configuration | ||||||||||||||||
actualSystemName | System name given by the user as user/metadata | ||||||||||||||||
auditLogState | Management audit log state | ||||||||||||||||
banner | The configurable banner text that displays when users login to EMA and CLI applications. Refer to Banner - CLI for configuration details | ||||||||||||||||
cliSetWarningSupport | Setting to enable/disable warning prompts configured for the set command | ||||||||||||||||
clusterId | clusterID instance present in the userdata | ||||||||||||||||
contact | Contact information of the system | ||||||||||||||||
defaultAccountLocalOnly | This flag determines whether the default admin user must be locally authenticated. Options are:
The option can only be set to | ||||||||||||||||
dod | DOD-related configuration | ||||||||||||||||
dspMismatchAction | Action to take for one of the following DSP mismatch conditions:
| ||||||||||||||||
externalAuthenticationEnabled | The Conf-D CLI user information stored on remote Radius server for authentication | ||||||||||||||||
fips-140-2 | FIPS-140-2 related configuration and commands | ||||||||||||||||
localAuthenticationEnabled | The Conf-D CLI user information stored locally for authentication | ||||||||||||||||
location | Physical location of the system. | ||||||||||||||||
haMode | Identifies the HA mode of the system.
NOTE:
| ||||||||||||||||
passwordDictionary | Password management dictionary related configuration | ||||||||||||||||
passwordRules | The rules implementing Conf-D user password policy | ||||||||||||||||
passwordRulesForAdmin | The rules implementing user password policy for Administrator users | ||||||||||||||||
preserveCapacity | The Active continues to use the extra DSP capacity, as needed, assuming appropriate session licenses are in place; partial redundancy is in effect NOTE: If a switchover occurs, calls using the extra, non-matching DSP capacity on Active are not protected during switchover (i.e. partial redundancy) | ||||||||||||||||
preserveRedundancy | The Active automatically triggers a graceful dry-up in an attempt to align DSP hardware capabilities. Once dry-up completes, the Active uses the protected, matching DSP capacity to preserve redundancy. NOTE: During the dry-up period, active calls using the extra, non-matching DSP capacity are not protected in the event that a switchover occurs before the dry up completes. | ||||||||||||||||
rest |
| ||||||||||||||||
savedConfigurations | A list of saved configurations, by revision number and the timestamp when the configuration was saved. Applicable for SBC SWe N:1 HA cluster deployments using OAM configuration mode. | ||||||||||||||||
sftpUserPassword | Password rules for SFTP user | ||||||||||||||||
sshPublicKeyAuthorizationEnabled | The current state of this flag which is used for SSH public key authentication through CLI for all users | ||||||||||||||||
utilMonitorStatsInterval | The time interval for system resource monitoring statistics. | ||||||||||||||||
| The number of past intervals saved for system resource monitoring statistics. | ||||||||||||||||
verifyAutoIndex | View the verifyAutoIndex setting. |
Announcements
Announcement file status and statistics.
Command Syntax
Code Block |
---|
> show table system announcements |
Command Parameters
Table 3: Announcements Attributes
Parameter | Description |
---|---|
memoryUsage | Announcement segment NP memory usage.
|
| Announcement segment file status.
|
AD Sync Status
Command Syntax
Code Block |
---|
> show table system adSyncStatus |
Command Parameters
Table 4: adSyncStatus Command Parameters
Parameter | Description |
---|---|
adSyncStatus | Displays AD server sync status Specifies one of the following status values:
|
CPU Transcode Status
Anchor | ||||
---|---|---|---|---|
|
The CPU Transcode Status captures the information on spilled over channels due to the exhaustion of GPU resources. GPU codecs appear on the CPU when the GPU resources are exhausted and cannot accommodate GPU-supported codec channels, so the codec channels spill onto the CPU. You can use the show status system cpuTranscodeStatus
command only on GPU accelerated SWe and only for codecs with GPU support.
Info |
---|
Applies to SBC SWe Only. |
Command Syntax
Code Block |
---|
show table system cpuTranscodeStatus |
Command Parameters
Table 5: cpuTranscodeStatus Descriptions
Parameter | Status Names and Descriptions | ||||
---|---|---|---|---|---|
|
|
Daughter Board Status
Server Daughter Board (DB) status details.
Info |
---|
Applies to SBC 7000 only. |
Command Syntax
Code Block |
---|
> show table system daughterBoardStatus |
Command Parameters
Table 6: Daughter Board Status Attributes
Parameter | Description |
---|---|
daughterBoardStatus | <server name> – Server name |
daughterBoardId | Daughter board identifier SBC 7000 series:
|
fpgaVersion | A card’s programmed firmware version (using FPGA build date) NOTE: This maintenance field does not apply to SPS100 cards. |
imageLoadFailureCount | Number of module boot failures since the last successful module boot, for use during diagnostic testing of a potentially failed module. NOTE: This maintenance field does not apply to SPS100 cards. |
operationalStatus | Operational state of daughter board.
|
partNum | The part number of the module (if present) |
present | Indicates if the module is present or not. |
productName | Identifies manufacturer name of module (if present) |
| Identifies the serial number of the module (if present) |
Anchor | ||||
---|---|---|---|---|
|
DSP PAD
DSP PAD configuration service (SBC must be restarted for new configuration to take effect).
Command Syntax
Code Block |
---|
> show table system dspPad |
Command Parameters
Table 7: DSP PAD Attributes
Parameter | Description |
---|---|
audioTxDuring2833 | State of Audio Transmit During 2833. |
comfortEnergy | Initial estimate (in –dBm) to be used for generating comfort noise. |
jitterEvalPeriod | Time period to decide when to periodically evaluate playout occupancy (in milliseconds). |
jitterMinOccThsh | If occupancy falls below this threshold for some time period we advance the playout time (in milliseconds). |
playoutTimeseriesPeriod | Duration of one period of the RTP playout buffer loss time series statistic. |
playoutTimeseriesThreshold0 | Threshold #0 for generation of the playout loss time series statistic. |
playoutTimeseriesThreshold1 | Threshold #1 for generation of the playout loss time series statistic. |
playoutTimeseriesThreshold2 | Threshold #2 for generation of the playout loss time series statistic. |
rtpDtmfRelay | RTP Payload type to be received as DTMF relay during compressed calls. |
sidHangoverTime | Minimum time (in milliseconds) after DSP detects speaker going inactive before sending silence packets. |
sidMaxNoiseFloor | Maximum noise floor (in –dBm). |
sidMaxTime | Maximum time (in milliseconds) between silence packets. |
sidMinNoiseFloor | Minimum noise floor (in –dBm). |
sidMinTime | Minimum time (in milliseconds) between silence packets. |
toneThreshold | Percentage Threshold crossing value for tone resources. |
toneThresholdState | State of Tone Threshold Event. |
universalCompressionThreshold | Percentage Threshold crossing value for Universal Compression resources. |
| State of Universal Compression Threshold Event. |
highPriorityCompressionReservation | Percentage of compression resources (0-100, default = 0) reserved for high priority calls. |
highPriorityToneReservation | Percentage of tone resources (0-100, default = 0) reserved for high priority calls. |
Command Example
Code Block |
---|
> show table system dspPad jitterEvalPeriod 1000; jitterMinOccThsh 20; rtpDtmfRelay 100; sidMinTime 200; sidMaxTime 2000; sidHangoverTime 300; sidMinNoiseFloor 60; sidMaxNoiseFloor 48; comfortEnergy 56; universalCompressionThreshold 90; universalCompressionThresholdState enabled; playoutTimeseriesPeriod 20000; playoutTimeseriesThreshold0 0; playoutTimeseriesThreshold1 200; playoutTimeseriesThreshold2 600; toneThreshold 90; toneThresholdState enabled; audioTxDuring2833 enabled; highPriorityCompressionReservation 0; highPriorityToneReservation 0; |
DSP Resources
Command Syntax
Code Block |
---|
> show table system dspRes dspCallCurrentStatistics dspCallIntervalStatistics dspUsageCurrentStatistics dspUsageIntervalStatistics |
Command Parameters
Table 8: DSP Resources Attributes
Parameter | Description |
---|---|
|
|
dspCallCurrentStatistics | The System Call DSP Resource Current table containing the following information: The following statistics are collected in this table for each codec.
|
dspCallIntervalStatistics | The System Call DSP Resource Interval table containing the following statistics for the 'n' number of intervals:
|
dspUsageCurrentStatistics | The DSP Resource statistics details. The following statistics are collected in this table for each codec. Statistics are collected once per second.
For information on the supported codecs, refer to Audio Codecs. |
dspUsageIntervalStatistics | The DSP Resource Interval table containing the following statistics over the 'n' number of intervals. Interval statistics are weighted per codec type.
For information on the supported codecs, refer to Audio Codecs. NOTE: The number of available transcoded calls depends on whether or not back-to-back transcoding is required. Also, DSP resources are commonly held during call setup (even when transcoding ultimately is not required on the call). At a high call rate this can marginally cut into the number of DSP resources available on the system. |
DSP Status
This statistic command provides the current number of transcoded sessions per DSP2x slot. The SBC 5400 can include up to four DSP25 modules, and the SBC 7000 can include up to four DSP-LC modules.
(Refer to DSP Channel Densities for SBC 5400 and 7000 for details).
Command Syntax
Code Block |
---|
> show table system dspStatus dspUsage |
Command Parameters
Table 9: DSP Status Attributes
Parameter | Description | ||||
---|---|---|---|---|---|
|
The below fields display raw count of DSP resources (i.e. channels) in use on each slot to aid in understanding which slots are loaded and to what extent in case card removal/hot swap is necessary.
For each DSP codec, a
Additional fields:
|
Ethernet Port
Command Syntax
Code Block |
---|
> show table system ethernetPort mgmtAdmin mgmtPortStatus mgmtStatistics packetAdmin packetPortStatus packetStatistics portMonitorStatus portRedundancyGroupStatus |
Command Parameters
Table 10: Ethernet Port Attributes
Parameter | Description |
---|---|
mgmtAdmin | Management ports. |
mgmtPortStatus | Management port status details.
|
mgmtStatistics | Management port transmit and receive statistics.
|
packetPortStatus | Packet port status details.
|
packetStatistics | Packet port transmit and receive statistics.
|
portMonitorStatus | The port monitor status.
|
portRedundancyGroupStatus | Status of the port redundancy group.
|
Anchor | ||||
---|---|---|---|---|
|
Shows statistics of GPUs associated with the instance.
Info |
---|
Applies to SBC SWe only |
Command Syntax
Code Block |
---|
% show table system gpuStatus <server name> <deviceName> <utilization> <gpu index> <attribute> |
Command Parameters
Table 10: gpuStatus Descriptions
Parameter | Status Names and Descriptions |
---|---|
| Server name. |
<device Name> | Displays the hardware product name of the GPU device. |
<utilization> | Displays the raw NVIDIA utilization metric retrieved from the nvidia-smi command. |
<GPU index> | Index of the GPU. |
<attribute> | Attributes listed below:
Note: These attributes are only applicable when GPU traffic profile is set. For non-GPU traffic profiles, -1 is displayed for each attribute. |
Pagebreak |
---|
Anchor | ||||
---|---|---|---|---|
|
Shows codec channel capacities on a per GPU device basis. GPU information is system-level; output shows only one entry in case of an HA system. Available only on SWe except S-SBC SWe.
Command Syntax
Code Block |
---|
show table system gpuTranscodeStatus |
Command Parameters
Table 11: gpuTranscodeStatus Descriptions
Parameter | Status Names and Descriptions |
---|---|
|
|
Pagebreak |
---|
Anchor | ||||
---|---|---|---|---|
|
Include Page | ||||
---|---|---|---|---|
|
Anchor | ||||
---|---|---|---|---|
|
Multiexcerpt | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
| |||||||||||
|
Multiexcerpt | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
IP Policing - uFlowStats FieldsThe uFlowStats table contains the following fields:
The following table lists fields that appear in both the
Table 12: IP Policing System Current and Interval Attributes
|
License
Command Syntax
Code Block |
---|
> show table system licenseDomainBundleInfo licenseInfo licenseNodeLockedInfo licenseRequired licenseStatus |
Command Parameters
Table 13: License Attributes
Parameter | Description | ||||||||
---|---|---|---|---|---|---|---|---|---|
| License details for the domain licenses available on the SBC.
| ||||||||
| The license status for all installed license features or for a specified
| ||||||||
licenseNodeLockedBundleInfo | License details for the legacy licenses stored on the
| ||||||||
licenseRequired | Displays the
(Applies to 'show table' command only) NOTE: This attribute only applies if the current | ||||||||
| The CE license status table describes the current CE license state, for example "
|
Load Balancing Service
Load Balancing Service (SBC 7000/SWe)
Load Balancing Service status details.
Command Syntax
Code Block |
---|
> show table system loadBalancingService groupName inviteRetargetMode leaderStatistics leaderStatus registerRetargetMode resourceInfoStatus |
Table 14: Load Balancing Service Attributes (SBC 7000/SWe)
Field | Description |
---|---|
groupName | Domain name of the load balancing group. |
inviteRetargetMode | Load balancing service mode for INVITEs. |
leaderStatistics | Specifies the leader statistics table.
|
leaderStatus | Displays the IP address of leader nodes in the cluster.
|
registerRetargetMode | Specifies the load balancing service mode for REGISTERs ( |
resourceInfoStatus | Node resource information.
|
Load Balancing Service (S-SBC)
The following table lists Load Balancing Service status details.
Command Syntax
Code Block |
---|
> show table system loadBalancingService dspLeaderStatus dspResourceCacheStatus dspSeedNodeStatus groupName inviteRetargetMode leaderStatistics leaderStatus policerLeaderStatus policerResourceCacheStatus policerSeedNodeStatus registerRetargetMode resourceInfoStatus |
Table 15: Load Balancing Service Attributes (S-SBC)
Field | Description |
---|---|
dspLeaderStatus | Displays the instance status of the leader nodes in the cluster.
|
dspResourceCacheStatus | Displays media resource cache information.
|
dspSeedNodeStatus | Displays cluster seed node status.
|
groupName | Domain name of the load balancing group. |
inviteRetargetMode | Specifies the load balancing service mode for INVITEs. Enables load balancing for initial INVITE requests. If set to redirect, calls may get retargeted using SIP 302 to balance the load.
|
leaderStatistics | Specifies the leader statistics table.
|
leaderStatus | Displays the IP address of leader nodes in the cluster.
|
policerLeaderStatus | Displays policer cluster leader node status.
|
policerResourceCacheStatus | Displays policer media resource cache information.
|
policerSeedNodeStatus | Displays policer cluster seed node status.
|
registerRetargetMode | Specifies the load balancing service mode for REGISTERs ( |
resourceInfoStatus | Node resource information.
|
Load Balancing Service (M-SBC)
Load Balancing Service status details.
Command Syntax
Code Block |
---|
> show table system loadBalancingService dspResourceCacheStatus groupName leaderStatistics leaderStatus policerResourceCacheStatus privateIpInterfaceGroupName |
Table 16: Load Balancing Service Attributes (M-SBC)
Field | Description |
---|---|
dspResourceCacheStatus | Displays media resource cache information.
|
groupName | Domain name of the load balancing group. |
leaderStatistics | Specifies the leader statistics table.
|
leaderStatus | Displays the IP address of leader nodes in the cluster.
|
policerResourceCacheStatus | Displays policer media resource cache information.
|
privateIpInterfaceGroupName |
|
Management IP Interface Group
Command Syntax
Code Block |
---|
> show table system mgmtIpInterfaceGroup <mgmt group name> mgmtIpInterface > show table system mgmtIpInterfaceGroup <mgmt group name> mgmtIpInterfaceStatus |
Table 17: Mgmt IP Interface Group Parameters
Parameter | Description |
---|---|
| Management IP interface group name. |
mgmtIpInterface | The management IP interfaces in this management IP interface group.
|
| The status of the IP interfaces in this IP interface group.
|
Network Processor
Include Page | ||||
---|---|---|---|---|
|
Noprint | |
---|---|
|
Cloak | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Command SyntaxCommand ParametersTable 18: Network Processor Statistics Attributes
|
NTP
NTP services management
Command Syntax
Code Block |
---|
> show table system ntp keys peerStatus serverAdmin systemStatus timeZone |
Command Parameters
Table 19: NTP Attributes
Parameter | Description |
---|---|
keys | Displays NTP server key details.
|
peerStatus | Displays status information about each NTP peer.
|
serverAdmin | Displays information about each NTP Server configured to provide network time.
|
systemStatus | Displays system status information about NTP.
|
| This table contains Time Zone configuration. Fields include:
NOTE: In an HA configuration, the Active and Standby system times and refTimes will not match in the results of this command because SBC updates NTP data independently. |
Policy Server
Softswitch servers and client services status/statistics details.
Command Syntax
Code Block |
---|
> show table system policyServer globalConfig localServer policyServerStatus remoteServer |
Command Parameters
Table 20: Policy Server Attributes
Attribute | Description |
---|---|
globalConfig | Defines global configuration applicable to all policy servers.
|
localServer | Local (embedded) policy server configuration.
|
policyServerStatus | Policy Server status table. Fields include:
|
| Table of softswitch remote server configurations. Fields include:
|
Security
Security management status/statistics details.
Command Syntax
Code Block |
---|
> show table system security certExpiryCheck hashEventLogs ipsec ocspProfileUses ocspStatistics pki |
Command Parameters
Table 21: Security Attributes
Parameter | Description | ||||||||
---|---|---|---|---|---|---|---|---|---|
certExpiryCheck | Checks for expired certificates, trust anchor validity, and if certificates have been revoked if OSCP is enabled. Fields include:
| ||||||||
hashEventLogs | Shows the existence of an entry in the PrivateKeyName fields. If there is a PrivateKeyName entry displayed, this indicates that a private key is configured. | ||||||||
ipsec | IPsec configuration.
| ||||||||
ocspProfileUses | This table contains OCSP profile usage status. Fields include:
| ||||||||
ocspStatistics | This table contains OCSP Statistics. Fields include:
| ||||||||
pki |
|
SLB
Code Block |
---|
> show table system slb commInterface globalUtilization inviteReqTimeout nonInviteReqTimeout overloadControlOptions regReqTimeout sipClientCurrentStatistics sipClientIntervalStatistics sipClientStatistics sipClientStatus |
Command Parameters
Table 22: SLB Parameters
Parameter | Description |
---|---|
commInterface | Defines the communication interface for SLB traffic. |
globalUtilization | The Global Utilization threshold on the SLB to generate an alarm. Range is 1-100. |
inviteReqTimeout | INVITE transaction timeout on the SLB. |
nonInviteReqTimeout | Non INVITE transaction timeout on the SLB. |
overloadControlOptions |
|
regReqTimeout | Registration transaction timeout on SLB. |
sipClientCurrentStatistics | The current statistics of SIP clients registered with the SLB.
|
sipClientIntervalStatistics | The interval statistics of SIP clients registered with SLB.
|
sipClientStatistics | The statistics of SIP clients registered with SLB.
|
sipClientStatus | The current status of SIP clients registered with the SLB. |
SWe
SWe-related status/statistics details.
- sweActiveProfile
- sweCapacityEstimate
- sweConfigProfileSelection
- sweCodecMixProfile
- sweProcessorCapacity
- sweTrafficProfiles
sweActiveProfile
This table contains the name of active profile and time-stamp of profile activation.
Command Syntax
Code Block |
---|
> show table system sweActiveProfile |
Command Parameters
Table 23: SWe Active Profile Parameters
Parameter | Description |
---|---|
name | SWe Active Profile name |
stateChangeTime | The time-stamp of profile activation |
Command Example
Code Block |
---|
show table system sweActiveProfile name standard_passthrough_profile; stateChangeTime 2017-11-13T10:56:16-00:00; |
sweCapacityEstimate
This table contains the capacity estimates for all standard and custom profiles.
Command Syntax
Code Block |
---|
> show table system sweCapacityEstimate |
Command Parameters
Table 24: SWe Capacity Estimate Parameters
Parameter | Description |
---|---|
name | SWe Active Profile name |
Estimated Session Capacity | Estimated number of sessions supported in the system. |
Estimated Num Subcribers | Estimated number of subscribers supported in the system. |
Estimated CPS | Estimated maximum calls per second (cps) supported in this system. |
Estimated Registration Capacity | Estimated maximum registrations/sec supported in this system. |
Estimated Refresh Register Capacity | Estimated maximum refresh registrations/sec supported in this system. |
Estimated Protected PPS | Estimated DOS PPS protected by the system, the unit is million packets per second. |
Max Passthrough Sessions | Estimated maximum passthrough sessions. |
Max Crypto Sessions | Estimated maximum crypto sessions. |
Estimated TX PPS | Estimated transmitted PPS for estimated sessions |
Estimated RX PPS | Estimated received PPS for estimated sessions |
Command Example
Code Block |
---|
> show table system sweCapacityEstimate ESTIMATED ESTIMATED ESTIMATED ESTIMATED REFRESH ESTIMATED MAX MAX SESSION NUM ESTIMATED REGISTRATION REGISTER PROTECTED PASSTHROUGH CRYPTO ESTIMATED ESTIMATED NAME CAPACITY SUBSCRIBERS CPS CAPACITY CAPACITY PPS SESSIONS SESSIONS TX PPS RX PPS ----------------------------------------------------------------------------------------------------------------------------------------- default 1496 65536 72 0 0 0.15 1500 656 0.15 0.15 standard_slb_profile 5180 65536 144 0 0 0.15 0 0 0.0 0.0 standard_msbc_profile 1497 65536 144 0 0 0.15 1500 656 0.15 0.15 standard_callmix_profile 1496 65536 72 0 0 0.15 1500 656 0.15 0.15 standard_gpu_isbc_profile - - - - - - - - - - standard_gpu_tsbc_profile - - - - - - - - - - standard_signaling_profile 5180 65536 144 0 0 0.15 0 0 0.0 0.0 standard_passthrough_profile 1496 65536 144 0 0 0.15 1500 656 0.15 0.15 standard_transcoding_profile 318 65536 72 0 0 0.15 1500 656 0.03 0.03 standard_highcps_callmix_profile 1487 65536 144 0 0 0.15 1500 656 0.15 0.15 |
sweCodecMixProfile
This table contains the standard codec mix profiles.
Command Syntax
Code Block |
---|
> show table system sweCodecMixProfile |
Command Parameters
Table 25: SWe Codec Mix Profile Parameters
Parameter | Description |
---|---|
codecMixProfileName | The codec mix profile name. |
codec | The codec used by the standard profile. |
pTime | Packetization time in milliseconds. |
percentage | The percentage allocated for each codec mix profile. NOTE: The sum of codec mix profile entries must equal 100. |
Command Example
Code Block |
---|
show table system sweCodecMixProfile CODEC MIX PROFILE NAME CODEC PTIME PERCENTAGE ------------------------------------------ G711_20ms g711 p20 100 G711_G729_20ms g711 p20 50 G711_G729_20ms g729 p20 50 |
sweConfigProfileSelection
The table sweConfigProfileSelection
lists the configured provisioning profile.
Command Syntax
Code Block |
---|
> show table system sweConfigProfileSelection name |
Command Parameters
Table 26: SWe Config Profile Selection Parameters
Parameter | Description |
---|---|
name | This parameter indicates the name of the configuration provisioning profile. The options are:
Note: When an instance comes up in an environment which has between 6 and 10 GB of memory, the value for For definitions of large and small provisioning limits, refer to SBC Provisioning Limits. |
Code Block |
---|
> show table system sweConfigProfileSelection name name large; [ok] |
sweProcessorCapacity
This table contains the relative performance indices of the underlying processor for different functionalities such as crypto, passthrough, signaling and transcoding as compared to 2690v2 processor (with the recommended Host settings). The performance indices are all 100 for base processor. Any index value lower than 100, means the underlying processor is poorer than 2690v2 with respect to that functionality and vice versa.
Command Syntax
Code Block |
---|
> show table system sweProcessorCapacity |
Command Parameters
Table 27: SWe Processor Capacity Parameters
Parameter | Description |
---|---|
cryptoIndex | Crypto index calculated by the startup scripts. |
passthroughIndex | Pass-through index calculated by the startup scripts. |
signalingIndex | Signaling index calculated by the startup scripts. |
transcodeIndex | Transcode index calculated by the startup scripts. |
Command Example
Code Block |
---|
> show table system sweProcessorCapacity cryptoIndex 94; passthroughIndex 95; signalingIndex 93; transcodeIndex 98; |
sweTrafficProfiles
This table contains the standard profiles and their fixed call mix.
Command Syntax
Code Block |
---|
> show table system sweTrafficProfiles |
Command Parameters
Table 28: SWe Traffic Profiles Parameters
Parameter | Description |
---|---|
Name | SWe Active Profile name |
Call Hold Time | Average Call Hold Time of the call load |
Is Access | If true, deployment is an access deployment |
BHCA per Subscriber | BHCA per subscriber |
Internal Refresh Timer | Internal refresh timer in seconds |
External Refresh Timer | External refresh timer in seconds |
Direct Media Percent | The percentage of call load that is Direct Media |
Transcode Percent | The percentage of call load that is transcoded call |
Passthrough Codec Profile | The name of the pass-through codec profile |
Transcoding Codec Profile | The name of the transcoding codec profile |
Crypto Percent | The crypto percentage refers to the number of legs that are encrypted |
Tones Percent | The number of legs that get tones treatment |
Processor Capability Index Override | If true, index overriding is disabled and the overrideIndexValue can be entered |
Processor Capability Index Override Value | The value of overrideIndexValue field |
| Specifies the type of transcoding: GPU (true) or CPU (false) |
| A signaling cost factor to use during capacity estimation. |
| A media cost factor to use during capacity estimation. |
| A transmitted (tx) PPS factor to use during capacity estimation. |
| A received (rx) PPS factor to use during capacity estimation. |
Command Example
Code Block |
---|
> show table system sweTrafficProfiles PROCESSOR PROCESSOR CAPABILITY CALL INTERNAL EXTERNAL DIRECT PASSTHROUGH CAPABILITY INDEX SIG MEDIA HOLD IS BHCA PER REFRESH REFRESH MEDIA TRANSCODE CODEC TRANSCODING CRYPTO TONES INDEX OVERRIDE USE GPUFOR COST COST TX RX NAME TIME ACCESS SUBSCRIBER TIMER TIMER PERCENT PERCENT PROFILE CODEC PROFILE PERCENT PERCENT OVERRIDE VALUE TRANSCODING FACTOR FACTOR PPSFACTOR PPSFACTOR ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ default 100 false - - - 0 2 G711_20ms G711_G729_20ms 0 0 false - false 1.0 1.0 1.0 1.0 standard_slb_profile 100 false - - - 100 0 - - 0 0 false - false 1.0 1.0 1.0 1.0 standard_msbc_profile 150 false - - - 0 0 G711_20ms - 0 0 false - false 1.0 1.0 1.0 1.0 standard_callmix_profile 100 false - - - 0 10 G711_20ms G711_G729_20ms 0 0 false - false 1.0 1.0 1.0 1.0 standard_gpu_isbc_profile 100 false - - - 0 100 - G711_G729_20ms 0 0 false - false 1.0 1.0 1.0 1.0 standard_gpu_tsbc_profile 100 false - - - 0 100 - G711_G729_20ms 0 0 false - false 1.0 1.0 1.0 1.0 standard_signaling_profile 100 false - - - 100 0 - - 0 0 false - false 1.0 1.0 1.0 1.0 standard_passthrough_profile 100 false - - - 0 0 G711_20ms - 0 0 false - false 1.0 1.0 1.0 1.0 standard_transcoding_profile 100 false - - - 0 100 - G711_G729_20ms 0 0 false - false 1.0 1.0 1.0 1.0 standard_highcps_callmix_profile 25 false - - - 0 0 G711_20ms - 0 0 false - false 1.0 1.0 1.0 1.0 |
General Command Examples
To view installed licenses:
Noprint | |
---|---|
|
Cloak |
---|
To view the call count status for the server before a switchover:
Info |
---|
During a switchover call history of only stable calls are maintained. In ‘ |
Noprint | |
---|---|
|
Cloak |
---|
To switch over the management applications and restart “all” the applications:
Noprint | |
---|---|
|
Cloak |
---|
To view
Spacevars | ||
---|---|---|
|
Noprint | |
---|---|
|
Cloak |
---|
Two maintenance fields apply in this view:
- IMAGE LOAD FAILURE COUNT – Number of module boot failures since the last successful module boot, for use during diagnostic testing of a potentially failed module.
- FPGA VERSION – A card’s programmed firmware version (using FPGA build date).
Info | ||
---|---|---|
| ||
The maintenance fields IMAGE LOAD FAILURE COUNT and FPGA VERSION do not apply to SPS100 cards. |
To view the synchronization status of the system as a table:
Noprint | |
---|---|
|
Cloak |
---|
To view the front panel LED status of the system:
Noprint | |
---|---|
|
Cloak |
---|
To view fan status (example is for
Spacevars | ||
---|---|---|
|
Noprint | |
---|---|
|
Cloak |
---|
To view the license information of the application:
Noprint | |
---|---|
|
Cloak |
---|
To view the MAC addresses status:
Noprint | |
---|---|
|
Cloak |
---|
To view CPU Utilization for the current interval period:
Noprint | |
---|---|
|
Cloak |
---|
To view system congestion status details.
Noprint | |
---|---|
|
Cloak |
---|
To view system congestion current statistics.
Noprint | |
---|---|
|
Cloak |
---|
To view DoD mode status.
Noprint | |
---|---|
|
Cloak |
---|
To view Micro Flow stats:
Noprint | |
---|---|
|
Cloak |
---|
To view LSWU results:
Noprint | |
---|---|
|
Cloak |
---|
To display the current HA configuration settings:
Noprint | |
---|---|
|
Cloak |
---|
To display results of running verifyDatabaseIntegrity
command:
Noprint | |
---|---|
|
Cloak |
---|
To display sync status of active and standby nodes created through a N:1 redundancy group:
Noprint | |
---|---|
|
Cloak |
---|
To view sync status details of the standby node for active nodes created through a N:1 redundancy group configuration.
Noprint | |
---|---|
|
Cloak |
---|
To view the personality role of the
Spacevars | ||
---|---|---|
|
Noprint | |
---|---|
|
Cloak |
---|
To view license bundle details for node-locked licenses:
Noprint | |
---|---|
|
Cloak |
---|
To view Server Admin status details on a virtual SBC:
Noprint | |
---|---|
|
Cloak |
---|