Page History
Add_workflow_for_techpubs | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
|
Include Page | ||||
---|---|---|---|---|
|
Panel | ||||
---|---|---|---|---|
In this section:
|
By using Service Discovery and an FQDN, the SBC can maintain registration with an EMS a
Spacevars | ||
---|---|---|
|
To enable dynamic enable dynamic Service Discovery of the EMS
Spacevars | ||
---|---|---|
|
Spacevars | ||
---|---|---|
|
Spacevars | ||
---|---|---|
|
Spacevars | ||
---|---|---|
|
This configuration applies and is visible only in SBC SWe virtualized deployments.
For more information on using Service Discovery, refer to Service Discovery for Trap Target Destinations and RAMP Registration. Refer to Configuring Service Discovery for Trap Target Destinations and EMS Registration for information on FQDN naming conventions.
Info | ||
---|---|---|
| ||
A reboot is required in order for changes to the FQDN name or to any IP Address Override values to take effect. |
Command Syntax
Set Command Syntax
Code Block | ||
---|---|---|
| ||
% set system ems emsFqdn <FQDN for EMS registration> emsIpAddressOverride <IP address to override the FQDN> |
Command Parameters
Caption | ||||
---|---|---|---|---|
| ||||
Parameter Name | Length/Range | Description | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
| 1....128 characters | Specifies an FQDN (up to 128 characters) of the
to Configuring Service Discovery for Trap Destinations and RAMP Registration for information on FQDN naming conventions. Changing this value requires an SBC reboot to take effect. | ||||||||
| <ip address> | IP address enforced for the
You can specify up to 8 override addresses. These will override any other previously configured
|
Command Example
The following example sets the name of the FQDN of the EMS
registration to “dev1._ems._tcp.example.com” and sets the IP address override to the value “11.12.13.14”. The Spacevars 0 model3 show
command displays the value of the EMS
IP address. (A reboot is required for any Spacevars 0 model3 set system ems
command to take effect.)
Code Block | ||
---|---|---|
| ||
% set system ems emsFqdn dev1._ems._tcp.example.com % set system ems emsIpAddressOverride 11.12.13.14 % commit % show status system ems emsIpAddress emsIpAddress 11.12.13.14 |