Page History

...

1. In the WebUI, click the Settings tab.

2. In the left navigation page, access System > Node-Level Settings. The Node-Level Settings page is displayed.

3. Configure the NTP and DNS Servers with network-specific data.

4. Leave all other parameters as default.

5. Click Apply.
   
   TLS Configuration - Example Values

   Parameter	Example Value
   Host Name	aepsite6
   Domain Name	SonusMS01RibbonMS01.com
   Use NTP	Yes
   NTP Server	Specifies the FQDN, IPv4, or IPv6 address of the NTP server. If the host name is supplied, the SBC uses the DNS to connect to the NTP server.
   Use Primary DNS	Yes
   Primary Server IP	XXX.XXX.XX.XXX

   
   

   Node-level Settings - Example

   

...

1. In the WebUI, click the Settings tab.

2. In the left navigation page, access System > Node-Level Settings. The Node-Level Settings page is displayed.

3. Configure the NTP and DNS Servers with network-specific data.

4. Leave all other parameters as default.

5. Click Apply.
   
   TLS Configuration - Example Values

   Parameter	Example Value
   Host Name	aepsite6
   Domain Name	SonusMS01RibbonMS01.com
   Use NTP	Yes
   NTP Server	Specifies the FQDN, IPv4, or IPv6 address of the NTP server. If the host name is supplied, the SBC uses the DNS to connect to the NTP server.
   Use Primary DNS	Yes
   Primary Server IP	XXX.XXX.XX.XXX

   
   

   Node-level Settings - Example

   

   
   

...