Page History
...
Node-Level Network Settings
Anchor | ||||
---|---|---|---|---|
|
...
bgColor | #FAFAFA |
---|---|
borderStyle | none |
Defines whether the node level settings are set through dynamic or static configuration. Available options: Dynamic (configured by system) or Static (configured manually). The Dynamic option is available only when one or more logical interfaces are configured to use Dynamic addressing.
Host Information - Field Definitions
Host Name
...
Host Name
...
...
bgColor | #FAFAFA |
---|---|
borderStyle | none |
Specifies the DNS host name for the system.
Domain Name
...
...
Specifies the DNS domain name for the system. This field is available only
...
if Node-Level Network Settings is set to Static.
System Description
...
bgColor | #FAFAFA |
---|---|
borderStyle | none |
Sets the SNMP attribute 'sysDescription' in the System-Group MIB. Operator may use this field to record a short description of the system. By convention, this field should include the full name and the hardware type.
System Location
...
...
bgColor | #FAFAFA |
---|---|
borderStyle | none |
Sets the SNMP attribute 'sysLocation' in the System-Group MIB. Operator may use this field to record the physical location of the system.
System Contact
...
bgColor | #FAFAFA |
---|---|
borderStyle | none |
Sets the SNMP attribute 'sysContact' in the System-Group MIB. Operator may use this field to record the contact person for this system and information about how to contact this person.
Domain Name Service - Field Definitions
...
...
Domain Name Service is not available on the SBC CNe Edge solution.
Primary vs. Secondary DNS
...
Info |
---|
The Primary and/or Secondary DNS server addresses can be IPv6. If the domain name being resolved has both an IPv4 and IPv6 as the Primary and or Secondary IP address, the SBC gives priority to the IPv6 address. For example, if the domain maps to both192.168.20.143 and fc00:50::50, the fc00:50::50 address is used first. |
Use Primary DNS
...
Specifies whether or not the SBC uses DNS. Available options: Yes or No. This field is available only
...
if Node-Level Network Settings is set to Static.
Primary Server IP
...
...
Specifies the IPv4 or IPv6 address of the Primary DNS server. If the Node-Level Network Settings drop down box is set to Dynamic, this field is configured automatically. Field is displayed when Use Primary DNS is set to Yes.
Primary Source
...
bgColor | #FAFAFA |
---|---|
borderStyle | none |
Field lists all Logical Interfaces for the Primary DNS. The IP address selected is used as the source IP for the corresponding DNS queries.
Definitions for available options include:
- <IP Address>: Source IP is the IP address associated with the source IP for the corresponding DNS queries.
- Auto: Source IP is the IP address of the interface which is used for the DNS query.
Use Secondary DNS
...
bgColor | #FAFAFA |
---|---|
borderStyle | none |
Specifies whether or not a secondary DNS server is used.
Secondary Server IP
...
...
bgColor | #FAFAFA |
---|---|
borderStyle | none |
Specifies the IPv4 or IPv6 address of the Secondary DNS server. If Node-Level Network Settings is set to Dynamic, this field is configured automatically. Field is displayed when Use Secondary DNS is set to Yes.
Secondary Source
...
...
Field lists all Logical Interfaces for the Secondary DNS. The IP address selected is used as the source IP for the corresponding DNS queries.
- <IP Address>: Source IP is the IP address associated with the source IP for the corresponding DNS queries.
- Auto: Source IP is the IP address of the interface which is used for the DNS query.
Enable DNS Service
Info | ||||||
---|---|---|---|---|---|---|
Panel | ||||||
| ||||||
Note: This field not applicable to the |
Time Management - Field Definitions
Time Zone
...
bgColor | #FAFAFA |
---|---|
borderStyle | none |
Sets the time zone for the node.
Use NTP
Info |
---|
NTP Server is not available on the SBC CNe Edge solution. |
...
...
Determines whether to use Network Time Protocol (NTP) as a time source.
NTP Server
...
bgColor | #FAFAFA |
---|---|
borderStyle | none |
Specifies the FQDN, IPv4, or IPv6 address of the first NTP server. If the host name is supplied, the SBC uses the DNS to connect to the NTP server. This field is available only when the Use NTP field is set to Yes.
NTP Server Authentication
...
bgColor | #FAFAFA |
---|---|
borderStyle | none |
Specifies whether or not to use authentication when communicating with the NTP server. Available options: Enabled or Disabled. This field is available only when Yes is selected from the Use NTP list box.
NTP Server - MD5 Key ID
...
...
Specifies the MD5 Key ID to be used in authenticating the first NTP server. This field is available only when the NTP Server Authentication field is Enabled.
NTP MD5 Key
...
...
Specifies the MD5 key used when authenticating the first NTP Server. This field is available only when the NTP Server Authentication field is Enabled.
Use NTP Server 2
...
Specifies whether or not to use a second NTP Server as a time source.
NTP Server 2
...
...
bgColor | #FAFAFA |
---|---|
borderStyle | none |
Specifies the FQDN, IPv4 or IPv6 address of the second NTP server. If the hostname is supplied, the SBC uses the DNS to connect to the NTP server. This field is available only when Yes is selected from the Use NTP Server 2 list box.
NTP Server 2 Authentication
...
Specifies whether or not to use authentication when communicating with the second NTP server. This field is available only when Yes is selected from the Use NTP Server 2 list box.
Pagebreak |
---|
NTP Server 2 - MD5 Key ID
...
bgColor | #FAFAFA |
---|---|
borderStyle | none |
Specifies the MD5 Key ID to be used in authenticating the second NTP server. This field is available only when Enabled is selected from the NTP Server 2 Authentication list box.
NTP Server 2 - MD5 Key
...
bgColor | #FAFAFA |
---|---|
borderStyle | none |
Specifies the MD5 key used when authenticating the second NTP Server. This field is available only when Enabled is selected from the NTP Server 2 Authentication list box.
DHCP Server - Field Definitions
Enable DHCP Server
Info | ||||
---|---|---|---|---|
Panel | ||||
| ||||
Note: This field not applicable to the Determines whether or not the SBC behaves as a DHCP server (grants leases to other hosts on the network). |
System LEDs
Info |
---|
System LEDs are only supported on SBC 1000/2000. |
Power LED
...
...
This field is automatically populated with the current status of the Power LED. Options are: Green (indicates the system is connected to a power source) or Off (unit is not connected to power source). For additional information about the Power LED's color and status definitions,
...
refer to SBC 1000-2000 Status LEDs.
Alarm LED
...
...
bgColor | #FAFAFA |
---|---|
borderStyle | none |
This field is automatically populated with the current status of the Alarm LED on the front panel. Possible entries: Green (no alarm), Off (warning), Amber (minor alarm), Red (major alarm), Red Blinking (critical alarm). For additional information about the Alarm LED's color and status definitions, see SBC 1000-2000 Status LEDs.
Ready LED
...
bgColor | #FAFAFA |
---|---|
borderStyle | none |
This field is automatically populated with the current status of the Ready LED on the front panel. Options are: Green (indicates the system is fully initialized) or Off (system is not fully initialized). For additional information about the Ready LED's color and status definitions, see SBC 1000-2000 Status LEDs.
Locator LED
...
...
This field provides the option to set the Locater LED on the front of the SBC unit to either Off (LED is off), On Green (LED is green) or Blinking Green (LED blinks one time per second). Default entry: On Green. This option helps network personnel easily locate the SBC unit in a rack with other equipment. This LED is also recognized as the Peer Node Status LED. For additional information about the Locator LED's color and status definitions, see SBC 1000-2000 Status LEDs.
Ribbon Application Management Platform - Field Definitions
Ribbon Application Management Platform
...
...
Configure this field to enable or disable the Ribbon Application Management Platform
- No (default) - The Ribbon Application Management Platform is disabled.
- Yes - The Ribbon Application Management Platform is enabled.
Ribbon Application Management Platform Address
...
bgColor | #FAFAFA |
---|---|
borderStyle | none |
Configure this field with the IP address or FQDN of the Ribbon Application Management Platform.
Info | ||
---|---|---|
| ||
This field applies only when the Ribbon Application Management Platform field is set to Yes. |
Management ID
...
| ||||
Note | ||||
---|---|---|---|---|
| ||||
When you enter the Management ID, you must insert a colon every two characters (00:00:00). Otherwise, the
|
Configure this field with the Management ID. For information about retrieving the Management ID, refer to Obtaining and Installing an SBC SWe Edge Production Node-Locked License.
Info | ||||||||
---|---|---|---|---|---|---|---|---|
| ||||||||
This field only applies onlyto the
|
Ribbon Application Management Platform
...
Ribbon Application Management Platform Connection
...
...
The status of the SBC’s connection to the Ribbon Application Management Platform. This status may be one of the following:
- Down
- Up
Info | ||
---|---|---|
| ||
This field only applies onlywhen the Ribbon Application Management Platform field is set to Yes. |
Ribbon Application Management Platform Tunnel Status
...
...
bgColor | #FAFAFA |
---|---|
borderStyle | none |
The status of the HTTPS tunnel from the Ribbon Application Management Platform to the SBC. This status may be one of the following:
- Not Connected
- Up
Info | ||
---|---|---|
| ||
This field only applies onlywhen the Ribbon Application Management Platform field is set to Yes. |
RAMP Online Licensing
...
bgColor | #FAFAFA |
---|---|
borderStyle | none |
The status of the NWDL Licensing on the SBC. This status may be one of the following:
- NWDL
- SBCaaS (Ribbon Connect)
- None
Info | ||||
---|---|---|---|---|
| ||||
This field only applies onlyto the
, and only when the RAMP field is set to Yes. |
Country Level Information
...
...
bgColor | #FAFAFA |
---|---|
borderStyle | none |
Configure this field with the country code in which the
resides. Spacevars 0 product2
Configuring Node Level Options
The following Configuration options are available from the Node Level Settings menu bar:
...
...