Page History
...
You can connect to RAMP and install the Management ID during initial setup or Azure deployment. For the procedure, refer to: SBC SWe Edge: Configuring for Ribbon Application Management Platform during Initial Setup and Running Initial Setup on SBC SWe Edge.
Prerequisite
For SBC SWe Edge standalone VMs, if using a template, check that ACL rules are configured to allow connectivity to Ribbon Application Management Platform.
...
- Features which are disabled by default, and for which the managing RAMP must explicitly activate to allow the SBC to offer the feature in question.
- If the feature has not been explicitly activated by the RAMP, a red cross will appear in the Licensed column of the Current Licenses display; furthermore, the operator will not be able to configure or make use of the feature.
- If the feature has been explicitly activated by the RAMP, a green checkmark will appear in the Licensed column of the Current Licenses display; furthermore, the operator will be able to configure or make use of the feature.
- Select features (e.g., SBC-SA-RTU-D, etc.) will be activated with a quantity value, found in the Total Licenses field of the Current Licenses display.
- A non-zero value in the Total Licenses field represents the quantity of the feature explicitly activated by the RAMP, but does not represent an upper quantity bound of the feature; the SBC is free to exceed this value, if so configured by the operator and if operation warrants.
- A positive value in the Available Licenses field represents the quantity of the feature as not being offered by the SBC during its operational lifetime;
- A negative value in the Available Licenses field represents the quantity of the feature offered by the SBC during its operational lifetime above and beyond the quantity of the feature explicitly activated by the RAMP. The operator should access the RAMP to activate additional quantity of the feature in question, so that the negative value disappears in favor of a higher value in the Total Licenses field. The operator may also be required to purchase additional feature licenses, should the NWDL pool in the RAMP not be sufficient to address the actual excess feature usage.
- Select features (e.g., TEAMS-SBA-D, etc.) will not be activated with a quantity value, but rather a Boolean value found in the Total Licenses field of the Current Licenses display. These features, once activated, remain available without regard to quantity.
- Features which are enabled by default. No action is required from the managing RAMP to explicitly activate the feature to allow the SBC to offer the feature in question.
- Such features (e.g., SBC-CNE-SA-INSTANCE-D, etc.) features will always have a green checkmark will appear in the Licensed column of the Current Licenses display; furthermore, the operator will be able to configure or make use of the feature.
- Such features may have a positive value in the Available Licenses field representing the feature has been accounted from the RAMP by the operator.
- Such features may have a negative value in the Available Licenses field representing the feature has not been accounted from the RAMP by the operator. The operator should access the RAMP to account for the feature in question, so that the negative value disappears in favor of a positive value in the Total Licenses field. The operator may also be required to purchase additional feature licenses, should the NWDL pool in the RAMP not be sufficient to address the actual feature usage across the NWDL licensing domain.
...
NWDL Feature Code | Description | Explicit Activation from RAMP Required to Offer Feature, Yes or No | Type | Applicable SBC Edge Products||||||
---|---|---|---|---|---|---|---|---|---|
SBC-SA-RTU-D | Single basic SIP session with RTP media licensed for use in any Standalone (non-High Availability) SBC | Yes | Counted | SBC SWe Edge, SBC CNe Edge | SBC-CNE-SA-RTU-D|||||
Cloud Native feature support for a single SIP session; enables SIP session operation in any Standalone (non- High Availability) Cloud Native SBC | Yes | Counted | SBC CNe Edge | SIP-REG-D | 250 SIP Registrants successfully registering to the SBC's SIP Registrar | Yes | Counted | ||
SBC SWe EdgeSBC-SIPREC-D | SIPREC call recording support for a single SIP session | Yes | Counted | SBC SWe Edge||||||
VDSP-SA-RTU-D | Transcode support for a single SIP session's media stream in a Standalone (non-High Availability) SBC | Yes | Counted | SBC SWe Edge, SBC CNe Edge | |||||
SRTP-D | Encryption (RTP ↔ SRTP) in a single SIP session's RTP media stream | No | Counted | SBC SWe Edge, SBC CNe Edge||||||
TEAMS-SBA-D | Direct Routing SBA in the low capacity (under 1000 sessions) SBC Edge device | Yes | Boolean | SBC SWe Edge||||||
DSP-AMRWB-D | AMR Wideband support in a single SIP session | Yes | Counted | SBC SWe Edge, SBC CNe Edge||||||
ENCRYPT-D | Encryption (TLS) in a single SIP session's signaling (TCP) connection | No | Counted | ||||||
SBC | SWe Edge, SBC CNe EdgeSBC-SWE-EDGE-SA-INSTANCE-D | Standalone (non-High Availability) SBC SWe Edge instance licensed for use in the customer's NWDL domain | No | BooleanSBC SWe Edge | |||||
SBC-EDGE-SA-HIGH-D | Standalone (non-High Availability) SBC SWe Edge instance licensed to carry in excess of 100 simultaneous SIP sessions | No | Boolean | SBC SWe Edge | |||||
DSP-SILK-D | SILK codec support in a single SIP session | Yes | CountedSBC | ||||||
SWe Edge, SBC CNe EdgeSBC-VIDEO-D | Video-related RTP media support in a single SIP session | Yes | Counted | SBC SWe Edge, SBC CNe Edge | SBC-CNE-SA-INSTANCE-D | Standalone (non-High Availability) Cloud Native SBC instance licensed for use in the customer's NWDL domain | No | Boolean | SBC CNe Edge
To enable the features listed above, the following feature codes are pushed from the Ribbon Application Management Platform. For more information on pushing these feature codes in RAMP, refer to: Enable NWDL Licenses in the Ribbon Application Management Platform Documentation.
...