Page History
...
Click Enter and log in with a valid User ID and Password.
License and TLS Certificates
...
Navigate to Node Interfaces > Logical Interfaces.
Ethernet 1 IP
Ethernet 1 IP is assigned an IP address used for transporting all the VOIP media packets (for example, RTP, SRTP) and all protocol packets (for example, SIP, RTCP, TLS). DNS servers of the customer's network should map the SBC Edge 1000 system hostname to this IP address. In the default software, Ethernet 1 IP is enabled and an IPv4 address is acquired via a connected DHCP server. This IP address is used for performing Initial Setup on the SBC Edge 1000.
Ethernet 2 IP
After initial configuration, you may configure this logical interface using the Settings or Tasks tabs in the WebUI or you can use the IP address configured during Initial Setup.
Configure Static Routes
...
Overview
Content Tools