Page History
...
- read this document and thoroughly understand the concepts and examples provided
- design the GWST process for the network before you attempt provisioning
- define the design criteria
- define the tables that are required for provisioning
- provision the table records in the appropriate order. Each table record must be provisioned separately.
Pagebreak |
---|
The GWST screening process uses inter-related GWST tables in the following sequence (top-down):
- Incoming Linksets
- Incoming App IDs
- Allowed OPCs
- Blocked OPCs
- Allowed SIOs
- Allowed DPCs
- Blocked DPCs
- Affected (Allowed) Destinations
- Allowed ISUP Message Types
- Allowed TUP Message Types
- Allowed SCCP Calling Party Addresses
- Allowed SCCP Calling Digits Party Address
- Allowed SCCP Translation Types
- Allowed SCCP Called Digits Party Address
- Allowed SCCP Called Party Address
- Affected (Allowed) SCCP Managements
- Allowed TCAP Op Codes
- Allowed MAP IMSIs
Info | ||
---|---|---|
| ||
If GTT is required on the incoming MSUs, any screening for SCCP Called (CLD) Party Address and SCCP subsystem management (SCMG) are processed after GTT. |
Pagebreak |
---|
- Redirect to App IDs
- Redirect to PCs
Info | ||
---|---|---|
| ||
Redirect to PC can only be linked from tables processed before GTT. |
...
The gateway accounting supports the following two tables that are handled independently from the screening and redirection tables:
- Accounting MTP3 Rules
- Accounting SCCP Rules
Info | ||
---|---|---|
| ||
Accounting record can be correlated to either an SS7 linkset or a user with an Application ID on a given NA. |
...
For example, if you are required to use the Incoming Linkset, Blocked OPC, and Allowed DPC screening tables, then the provisioning order would be
- Allowed DPC
- Blocked OPC
- Incoming Linkset
Info | ||
---|---|---|
| ||
Deletion of screening records must be done in the same order as the screening process (top-down). |
...