Page History
...
| Info |
|---|
Using the Easy Configuration wizard to configure the (SBC) does not modify existing configuration. The wizard will simply add the new configuration elements to the SBC. |
For SBC 1000/2000 and
| Spacevars | ||
|---|---|---|
|
- ATT SIP Trunk
- KDDI SIP Trunk
- NTT DOCOMO Officelink
- Other SIP Trunk
- SoftBank ConnecTalk
- Softbank White Office
- Telstra Enterprise SIP Connect
- Verizon SIP Trunk
- Twilio SIP Trunk
...
...
| 0 | series5 |
|---|
...
- Other SIP Trunk
- Verizon SIP Trunk
| Note |
|---|
NTT DOCOM Officelink, SoftBank ConnecTalk, SoftBank White Office, Telstra Enterprise SIP Connect, ATT SIP Trunk, and KDDI SIP Trunk are supported in SBC 1000-2000 only. |
...
Scenario Parameters - Field Definitions
Step 1
Application
...
| bgColor | #FAFAFA |
|---|---|
| borderStyle | none |
Click the arrow to select the scenario that describes your deployment. In this case, select SIP Trunk ↔ Microsoft On Premises.
Scenario Description
...
Type up to 32 characters as a descriptive name for the SIP Trunk ↔ Microsoft On Premises scenario.
| Info |
|---|
The Easy Config adds the scenario description as a prefix for all SBC configuration elements created for this deployment. |
Telephone Country
...
| bgColor | #FAFAFA |
|---|---|
| borderStyle | none |
...
The country in which the SIP ↔ Microsoft On Premises deployment originates.
Emergency Services
...
...
Defines the Emergency Services for outgoing numbers. For the purpose of this illustration above, Emergency Services is not selected. Field definitions are defined below.
Options: ELIN Identifier, E911/E112 or None.
| Info |
|---|
The E911 ELIN number from the "CompanyName" field configured in Lync location services is used as the authoritative Call Back number for outgoing E911 calls, and is always the preferred configuration. Specifically, it will take precedence over any Callback Number number configuration in Lync Setup. For more information, see Creating and Modifying Entries to Transformation Tables. |
...
Emergency Callback Number 1
...
| bgColor | #FAFAFA |
|---|---|
| borderStyle | none |
Call Back Number in string format. This field is displayed only when ELIN Identifier or E911/E112 is selected from Emergency Services.
Emergency Callback Number 2
...
...
| bgColor | #FAFAFA |
|---|---|
| borderStyle | none |
Second Call Back Number in string format. This field is displayed only when ELIN Identifier or E911/E112 is selected from Emergency Services.
PSAP Number
...
...
| bgColor | #FAFAFA |
|---|---|
| borderStyle | none |
Defines the Public Safety Answering Point Number. Valid entry 1 - 127 characters.
SIP Sessions
...
| bgColor | #FAFAFA |
|---|---|
| borderStyle | none |
Number of simultaneous SIP sessions allocated. Valid entry 1 - 960.
Name (SIP Trunk)
...
| bgColor | #FAFAFA |
|---|---|
| borderStyle | none |
...
The SIP trunk used for connection to the Microsoft UC environment. Valid options are: ATT SIP Trunk, KDDI SIP Trunk, NTT DOCOMO Officelink, Other SIP Trunk, SoftBank ConnecTalk,SoftBank White Office, Telstra Enterprise SIP Connect, and Verizon SIP Trunk.
The SIP Trunk selected determines the field options displayed in Step 2. See See Step 2 - Configure SIP Details for Endpoint.
Version (Microsoft On Premises)
...
...
Defines the version of Microsoft On Premises. Valid options: Skype for Business, Lync 2010/2013, or Microsoft Cloud Connector Edition.
Step 2 - Configure SIP Details for Endpoint
...
ATT SIP Trunk
Border Element Server
...
| bgColor | #FAFAFA |
|---|---|
| borderStyle | none |
The FQDN or IP address of the Remote Peer service provider.
Protocol
...
...
The IP protocol used for sending and receiving SIP messages between SBC and the Border Element Server. Valid entry UDP or TCP.
Port Number
...
| bgColor | #FAFAFA |
|---|---|
| borderStyle | none |
Number
The SIP Server Port number used for sending and receiving SIP messages between SBC and the Border Element Server.
Use Secondary Border Element Server
...
Enables or disables the secondary Remote Peer service provider configured.
Secondary Border Element Server
...
| bgColor | #FAFAFA |
|---|---|
| borderStyle | none |
...
Specifies the Secondary Border Element Service provider. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Border Element Server is Enabled.
Protocol
...
...
The Protocol used for communicating with the Secondary Border Element Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled.
Port Number
...
| bgColor | #FAFAFA |
|---|---|
| borderStyle | none |
The Port Number is used for sending and receiving messages between SBC and the Secondary Border Element server. This field is available only when Use Secondary Border Element Server is Enabled.
AT&T Simultaneous Ring Supported (AT&T Services)
...
...
| bgColor | #FAFAFA |
|---|---|
| borderStyle | none |
Enables/disables AT&T Simultaneous Ring. Valid option: Yes or No.
AT&T IP Toll Free
...
...
| bgColor | #FAFAFA |
|---|---|
| borderStyle | none |
Enables/disables the AT&T Toll Free option. Valid option: Enabled or Disabled.
IP Toll Free Access Number
...
| bgColor | #FAFAFA |
|---|---|
| borderStyle | none |
The Toll Free Access Number to use when the AT&T IP Toll Free option is enabled.
Server Pool Host (Skype for Business)
...
| bgColor | #FAFAFA |
|---|---|
| borderStyle | none |
...
The Pool name of the Lync Server (FQDN).
Protocol
...
| bgColor | #FAFAFA |
|---|---|
| borderStyle | none |
The IP protocol to use for sending and receiving SIP messages between SBC and the Server Pool Host. Valid entry: TLS or TCP.
Port Number (Server Pool)
...
The Port Number (via TLS or TCP) used for sending and receiving SIP messages between SBC and the Server Pool Host.
| Pagebreak |
|---|
KDDI SIP Trunk - Field Definitions
...
KDDI SIP Trunk Anchor KDDI SIP Trunk KDDI SIP Trunk
SIP Server
...
...
Type the FQDN for the service provider's SIP server.
Protocol
...
Hardcoded to UDP.
Port Number
...
...
Type the port number used for sending and receiving SIP messages between the SBC and the Border Element Server.
Main Telephone Number
...
The main telephone number for the KDDI SIP trunk
Called Prefix (FMC Service)
...
...
Type the city code and office code for setting up transformation rules for the FMC service.
Address of Record URI
...
| bgColor | #FAFAFA |
|---|---|
| borderStyle | none |
...
Type the Address of Record of the client that is registered on the SIP server.
Static Host (SIP Profile)
...
| bgColor | #FAFAFA |
|---|---|
| borderStyle | none |
Type the host and port information for the FQDN or IP address used in the From Header. Valid options: FQDN[:port] or IP4 [:port] or [IP6]:port
| Pagebreak |
|---|
Authentication ID (Remote Authorization Entry)
...
...
Specifies a user name to use in response to a challenge.
Password
...
| bgColor | #FAFAFA |
|---|---|
| borderStyle | none |
The password for the Authentication ID.
Confirm Password
...
...
| bgColor | #FAFAFA |
|---|---|
| borderStyle | none |
Re-enter the password for the Authentication ID.
DNS Server IP (Split DNS Table)
...
...
| bgColor | #FAFAFA |
|---|---|
| borderStyle | none |
IP address (IPv4 or IPv6) of the DNS server. The DNS Server IP address is for an SBC 1000/2000 that uses Split DNS with a primary DNS server, secondary DNS server, and a domain-specific DNS server for resolving FQDNs as required on internal and external networks.
Domain Name
...
Name
Domain name associated with the DNS IP address.
Select ISDN Ports
| Pagebreak |
|---|
...
These fields apply if you selected Twilio SIP Trunk in Step 1 - Select Scenario.
| Include Page | ||||
|---|---|---|---|---|
|
...
Overview
Content Tools