| Parameter | Presence | Type | Default | Description |
---|
| jitterEvalPeriod | O | uint32 | 1000 | Time period to decide when to periodically evaluate playout occupancy (in milliseconds). |
| jitterMinOccThsh | O | uint32 | 20 | If occupancy falls below this threshold for some time period we advance the playout time (in milliseconds). |
| rtpDtmfRelay | O | uint32 | 100 | RTP Payload type to be received as DTMF relay during compressed calls. |
| sidMinTime | O | uint32 | 200 | Minimum time (in milliseconds) between silence packets. |
| sidMaxTime | O | uint32 | 2000 | Maximum time (in milliseconds) between silence packets. Must be larger than minimum time between silence packets. |
| sidHangoverTime | O | uint32 | 300 | Minimum time (in milliseconds) after DSP detects speaker going inactive before sending silence packets. |
| sidMinNoiseFloor | O | uint32 | 60 | Minimum noise floor (in -dBm). If energy level is below this it will be considered as silence. Configuration range is between -62dBm -24dBm. |
| sidMaxNoiseFloor | O | uint32 | 48 | Maximum noise floor (in -dBm). If the energy level is above this it will be considered as speech. Configuration range is between -62dBm -24dBm. |
| comfortEnergy | O | uint32 | 56 | Initial estimate (in -dBm) to be used for generating comfort noise. It is used when no silence packets are received to generate comfort noise. Configuration range is between -90dBm and -35dBm. |
| universalCompressionThreshold | O | uint32 | 90 | Percentage Threshold crossing value for Universal Compression resources. When this threshold is reached an event will be generated if universalCompressionThresholdState is enabled. |
| universalCompressionThresholdState | O | enumeration | enabled | State of Universal Compression Threshold Event. An event will be generated only if state is enabled. |
| playoutTimeseriesPeriod | O | uint32 | 20000 | Duration of one period of the RTP playout buffer loss timeseries statistic. This statistic is used only when an RTP stream is terminated (it does not operate in a Packet Monitor channel type). Units: milliseconds (will be converted to 10 msec increments) |
| playoutTimeseriesThreshold0 | O | uint32 | 0 | Threshold #0 for generation of the playout loss timeseries statistic. The first quantization level is <= this threshold. The set of three thresholds specified here are used for all channel instances. Units: milliseconds (will be converted to 10 msec increments) Default: 0 (0.0 sec, 0% of playoutTimeseriesPerdiod) |
| playoutTimeseriesThreshold1 | O | uint32 | 200 | Threshold #1 for generation of the playout loss timeseries statistic. The second quantization level is: Threshold #0 < #Interpolations <= Threshold #1 Units: milliseconds (will be converted to 10 msec increments) Default: 200 (0.2 sec, 1% of playoutTimeseriesPerdiod) |
| playoutTimeseriesThreshold2 | O | uint32 | 600 | Threshold #2 for generation of the playout loss timeseries statistic. The third quantization level is: Threshold #1 < #Interpolations <= Threshold #2 Units: milliseconds (will be converted to 10 msec increments) Default: 600 (0.6 sec, 3% of playoutTimeseriesPerdiod) |
| toneThreshold | O | uint32 | 90 | Percentage Threshold crossing value for tone resources. When this threshold is reached an event will be generated if toneThresholdState is enabled. |
| toneThresholdState | O | enumeration | enabled | State of Tone Threshold Event. An event will be generated only if state is enabled. |
| audioTxDuring2833 | O | enumeration | enabled | State of Audio Transmit During 2833. Parameter that allows the user to inhibit the transmission of audio packets during the period lasting from the start of a transmitted RFC4733 event to the end of the transmitted RFC4733 event. |
| highPriorityCompressionReservation | O | uint32 | 0 | Percentage of compression resources reserved for high priority calls. |
| highPriorityToneReservation | O | uint32 | 0 | Percentage of tone resources reserved for high priority calls. |