Page History
REST API Method: PUT /rest/faxcodecprofile/{identifier}
| Page Tree | ||
|---|---|---|
|
Creates a FAX Codec Profile given a specific Table ID.
| Note | ||
|---|---|---|
| ||
The FAX Codec Profile identifier can only be within the range 1-9999 (inclusive) |
URL:
https://134.56.227.163/rest/faxcodecprofile/{identifier}
HTTP Method
PUT
Requires Authentication:
true
Parameters
| Parameter Name | Required | Service Affecting | Data Type | Default Value | Possible Values | Description |
|---|---|---|---|---|---|---|
| Description | No | No | string | none | 64 - Max Length | Identifies this profile so it can be easily recognized when selecting a codec. |
| FaxRelayFallBack | No | No | Enum | 0 | Possible values:
| Specifies if the T.38 should fall back to Fax Passthrough if not supported by peer. |
| FaxRateInBitsPerSecond | No | No | int | 14400 | Possible values:
| Specifies the maximum fax connection rate. Acceptable rate values are:
|
| SignalingPacketRedundancy | No | No | int | 3 | Possible values:
| Specifies the number of redundant packets to be sent for each T.30 (signaling) message. |
| PayloadPacketRedundancy | No | No | int | 0 | Possible values:
| Specifies the number of redundant packets to be sent for each packet containing page data. |
| ErrorCorrectionMode | No | No | Enum | 0 | Possible values:
| Specifies the error correction mode (ECM) for fax calls. |
| TrainingConfirmation | No | No | Enum | 1 | Possible values:
| Specifies the Training Confirmation (TCF) procedure for fax calls.
|
| FaxRelayFallBack | No | No | Enum | 0 | Possible values:
| Specifies if the T.38 should fall back to Fax Passthrough if not supported by peer. |
| SG3ToG3Fallback | Yes | No | Enum | 0 | Possible values:
| Specifies if the system should force Super G3 to Super G3 fax calls to lower rates so T.38 protocol can be used. |
Overview
Content Tools