Page History

Add_workflow_for_techpubs

AUTH1	UserResourceIdentifier{userKey=8a00a0c86820e56901685f374974002d, userName='null'}
JIRAIDAUTH	SBX-114305
REV5	UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cb8305e9, userName='null'}
REV6	UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cb8305e9, userName='null'}
REV3	UserResourceIdentifier{userKey=8a00a0c86cea5831016d24084ff50022, userName='null'}
REV1	UserResourceIdentifier{userKey=8a00a0c863c32a720163c47764100001, userName='null'}

Excerpt

This object displays the call CDR configuration.

Note
Records are always written to the local disk.

On the SBC main screen, go to Administration > Accounting and Logs > Admin. The CDR Admin window is displayed.

Table 1: Accounting and Logs - Edit Cdr Admin Window

Image Modified

The fields displayed are:

Table 1: Edit Cdr Admin Window

Parameter descriptions:

Parameter	Description

cdrVerToGenerate

CDR Ver To Generate

The SBC version on which the CDRs must remain formatted even after the SBC software is upgraded. The valid values for the configuration option are 0 or 10.1 for the SBC 10.1 release. The default value for the configuration is 0 (disabled). If the option is disabled, the CDRs are formatted according to the CAM version of the software release loaded on the SBC.

Note: The valid values list will change over time to support future releases.

0 - (default

- indicates

– Indicates this control is disabled)
10

.

_1_0

Examples of how the configuration control works

,

if

the users

you do not want to update the billing systems with every SBC upgrade:

Upgrade Scenario	Action and/or Effect
Upgrade from SBC 8.2 (or any old release) to 10.1	The new control does not take effect.
Upgrade from SBC 8.2 ( or any old release) to 11.1 (or future releases later than 10.1)	Baseline the SBC release and the Billing Systems to SBC 10.1. Once the SBC and the billing system are on SBC 10.1, set the new configuration on the SBC to "10.1" from 0 (disabled). If the configuration is set to the currently-loaded SBC software version (provided the current SBC loaded version is greater than or equal to 10.1) the CDR formatting is retained according to the selected SBC version across the upgrades.
Upgrade from SBC 10.1 to 11.1 (or future release later than 10.1)	Set the new configuration to 10.1 from 0 (disabled) prior to the upgrade.
Fresh installation of the SBC (version greater than or equal to 10.1 )	Set the configuration before the SBC is commissioned to take the calls. Ensure the configuration on the new SBCs are set to 10.1 as a part of the initial config load, before taking any traffic. Example: you are planning to add more SBCs to a cluster already using the current feature (the SBC version is 11.1 and the CDRs are formatted to 10.1 by having the new config set to 10.1 on the SBCs).

Generate SIP Recording CDR

Enables or disables generation of CDRs for recording SIP calls.

disabled

Disabled (default)

enabled

Enabled

Generation Mode

The type of calls for which accounting records should be logged on this

Spacevars

0	series

:

origination

Origination (default)

—Log

– Log accounting records for which this
Spacevars
0 series
is the originating gateway.

destination—Log

Destination – Log accounting records for which this
Spacevars
0 series
is the destination gateway.

allcalls—Log

All Calls – Log accounting records for all calls.

none—Log

None – Log no accounting records.

For SIP and H323 calls, accounting records are generated for all calls (ingress and egress), unless this value is none.

Intermediate Acct State

Specifies whether

Choose to enable or disable Intermediate Accounting

is Enabled or Disabled disabled

for the Node.

Options are:

Disabled (default)

enabled

Enabled

Intermediate Acct Interval

This configures the intermediate accounting interval, in seconds.

Range: 5-86400. Default = 60

Note: This object is only applicable when the "sonusAcctIntAcctMode" object of the sonusSbxCallAccountingInServiceNotification alarm is set to interval(1).

Second Stage Inherit First Stage

Enable flag to

allow second false

allow second stage accounting records for two stage calls to inherit fields from the first stage call.

Options are:

False (default)

true

True
Populate Non-ported LNP Numbers	Enable flag to

populate the

populate the Called Number Before Translation field in the accounting record for a number for which an LNP lookup was performed and lookup indicated that number has not been ported.

Options are:

False
True

false

true

(default)
Intermediate Acct Mode	Specifies the method by which intermediate records are generated.

Options are:

interval

Interval – (default)

—Generate

Generate an intermediate record for each

intermediateAcctInterval

'Intermediate Acct Interval' seconds throughout the call.

telcordia—Generate

Telcordia – Generate an intermediate record whenever the call exceeds the configured

intermediateLongDurThreshold value

'Intermediate Long Dur Threshold' value (in hours) and the

intermediateLongDurGenTime

'Intermediate Long Dur Gen Time' (of day) is reached.
Intermediate Long Dur Gen Time	Specifies Octet string that identifies the GMT time to generate Telcordia Long Duration accounting records. The format is 00:00:00.0

where each field is

, defined as:

Code Block

language	none

field octets   contents      range   
----- -------  ------------  -----
1       1      hour          0..23
2       2      minutes       0..59
3       3      seconds       0..60 (use 60 for leap-second)
4       4      deci-seconds  0..9

Start Acct State

Specifies whether Start Accounting is Enabled or Disabled for the Node.

Options are:

Disabled
Enabled (default)

Disabled


Event Acct State	Enable flag to generate EVENT records for OOD SUBSCRIBE, REFER, NOTIFY, REGISTER, OPTIONS, MESSAGE and PUBLISH event records. CDRs are logged when OPTIONS is relayed to the egress side.

Disabled

Disabled (default) Enabled
Event Acct PSX Info State	Log event records containing PSX information, such as PSX Congestion level, PSX Processing Time, Policy Response Call Type, PSX Billing Info, Route Label.

Disabled

Disabled (default) Enabled
Intermediate Trap State	Specifies whether a trap will be generated whenever an INTERMEDIATE record is generated.

Options are:

Disabled (default)
Enabled

enabled

disabled

enabled

disabled

Populate Remote GSX Info State

Specifies whether a destination

Spacevars

0	series

propagates its billing data to originating GSX for GW-GW calls.

Options are:

Disabled (default) Enabled
Early Attempt State	Specifies whether or not to generate early ATTEMPT records. An early ATTEMPT record is associated with an early call disconnect, before the request is sent.

Options are:

Disabled – Generate early ATTEMPT records.
Enabled –

enabled

(default)

-

Do not generate

early ATTEMPT records.disabled - Generate false

early ATTEMPT records.
Intermediate Long Dur Threshold	Specifies the Accounting INTERMEDIATE Records Duration (in hours). Must be 1-24; default is 24. This parameter is only applicable when intermediate records mode is set to telcordia. The INTERMEDIATE record is generated for each call whose duration exceeds this threshold on long duration generation time.
Send Egress CDR Info on Receipt	Specifies whether or not to send the egress CDR information immediately after receiving and processing it.

Options are:

False (default)

true

enabled

disabled

True
Populate IP TG Far End Switch Type	Specifies whether or not to use Ingress Far End Switch Type passed down from PSX IP TG for SIP ingress calls.

Options are:

uint16

Disabled (default) Enabled
Max Record Sequence Num	Specifies the maximum length of the Record Sequence Number field in the CDR.

Options are:

Uint16 – (default)

—16

16-bit record sequence number: 0 to 65535.

uint32—32

Uint32 – 32-bit record sequence number: 0 to 4294967295.

Space shortcuts

Page tree

Versions Compared

Old Version 1

New Version 2

Key