Page History
Add_workflow_for_techpubs | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Panel | |
---|---|
In this section:
|
...
Select VoIP > SIP from the Configuration Menu on the left-hand side.
Configure the SIP Server Settings for the B2BUA transparent mode support.
Caption 0 Table 1 Configuring SIP Server Settings Parameters 3 Configuring SIP Server Settings Parameter Example Configuration Value SIP Server Address siptrunk.exampledomain.com SIP Server Port 5060
(Verify with your SIP trunking provider which SIP port to configure.)
Note: If the FQDN resolves to a different port for the SIP Server Address the system will use the port returned in the DNS query response.SIP Server Transport UDP Enable SRTP Disabled Use Custom Domain DisabledEnabled SIP Server DomainNot set sipserver.domain.com List of SIP Servers None Load Balancing (Round Robin) Enabled Enable Multi-homed Outbound Proxy Mode Disabled Enable Transparent Proxy Mode EnabledDisabled Limit Outbound to Listed SIP Servers Enabled Limit Inbound to Listed SIP Servers Enabled Dynamic List of SIP Proxies support Disabled Include UPDATE in Allow Enabled PRACK Support Enabled GEOLOCATION Support Disabled Call Audit Support Disabled B2BUA Redirect Support (302) Enabled Session Timer Support Disabled Session Refresh Interval (s) 1800 (default) UDP Client Listening Port(s) 5060,5070,5075 (default) UDP Server Facing Port 5060 (default) UDP REGISTER Restricted to Port 0 (default) TCP Port 5060 (default) TCP Timeout (minutes) 10 (default) NAT Traversal
Disabled (default) Enable Sub Domain Pass through support Disabled Enable P-Associated-URI support Disabled SIP Use New Port on Hold Resume Enabled State client time(m) 1440 List of Allowed SIP servers SIP Server Address/FQDN None Transport UDP Action None SDP Modifications SDP Codec Operation No action SDP Codec Operation Allow only given codecs SDP Section that will be modified AudioDisabled Codecs (comma Comma separated list) PCMU, PCMA, CN, telephone-eventDisabled Reject when No Match match Codec EnabledDisabled Strip Matched Expressions \ba=candidate:.*\b
a=rtcp-mux
\ba=ice-.*\b
SIP Use New Port On Hold Resume Disabled for Request None Strip Matched Expressions for Response None Priority Numbers Priority Number 1:
Priority Number 2:
Priority Number 3:
Priority Number 4:
Not set Enable SIP Statistics Enabled - Click Submit to apply changes.
Overview
Content Tools