Page History
Add_workflow_for_techpubs | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
|
For For the SBC SWe systems, use the Swe the Swe Config Profile Selection window to select the configuration profile you want to use to specify provisioning specify provisioning limits for the system. The Select the Small or Large profile should be selected based on the available the available RAM capacity for the system.
On the SBC main screen, go to All > System > Swe Config Profile Selection. The Swe Config Profile Selection window opens.
Click on
Choose the profile you want to activate, and then click Save.
- Small (default) Extrasmall is applicable when the VM RAM is greater than or equal to between 6 and 10 GiB.
- Large is applicable when the VM RAM is greater than or equal to 18 GiB.
- Extrasmall is Largeuseracl – applicable when the VM RAM is between 6 and 10 GiB.
- >=18 GiB
- Small (default) is applicable when the VM RAM is greater than or equal to
- 10 GiB.
Info | ||||||
---|---|---|---|---|---|---|
| ||||||
The "Largeuseracl" profile is added in the 10.1.2 release. |
Info | ||
---|---|---|
| ||
|
For a profile change to take effect, you must reboot both nodes in the system must be rebooted and , whereby all active calls are lost. The system prompts you to confirm that it will reboot before activating the profile change.
Info | ||
---|---|---|
|
When an instance comes up in an environment which has between 6 and 10 GiB of memory, the value for |
Swe Config Profile |
Selection is automatically set to |
Extrasmall. It is not valid to reconfigure a deployment from one of the larger sizes ( |
Small, Large, or Largeuseracl) to the |
Extrasmall size. |
For definitions of large Large and small Small provisioning limits, refer to SBC Provisioning Limits.
For definitions of extrasmall Extrasmall provisioning limits, refer to Small SBC SWe Deployment Characteristics.pagebreak