Versions Compared

Old Version 1

changes.mady.by.user Ribbon Communications

Saved on

compared with

New Version 2

changes.mady.by.user Ribbon Communications

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.


Panel

In this section:

Children Display



Excerpt

Use the Signaling Packet Capture window to configure the Signaling Packet Capture utility. Signaling Packet Capture data is stored in a ".PKT" file in the location: /var/log/sonus/evlog/evlog

Info
titleNote

This utility is intended for use in debugging and should only be used with a limited number of calls at any one time. 

On the SBC main screen, go to Troubleshooting > Troubleshooting Configuration > Call Trace > Signaling Packet Capture.

The Signaling Packet Capture window is displayed.

Caption
0Figure
1Troubleshooting - Call Trace - Signaling Packet Capture

...

Image Added 

Use the following table to edit the fields and then click Save.

Caption
0Table
1Signaling Packet Capture Parameters


ParameterDescription
Signaling Packet Capture TimerThe signaling packet capture timer, in minutes, for both call and error trace filters. The value ranges from 0 to 360 minutes, with a default value of 180.
State

Use this flag to enable/disable signaling packet captures by enabling/disabling the timer.

  • Disable (default)
  • Enable



Info
titleNote

In the absence of any device or filter configuration, the Signaling Packet Capture feature only captures SIP/H.323 signaling for calls which are traced by Call Trace Filters.

Before making any change in the filter or applying new filter, change to Disable state. Once the filter is changed/applied, enable it.

...

Div
stylepadding-left:1%;
idindent

Children Display
depth2
styleh5

...