Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Use the Shared CAC Limits Pool window to configure general parameters for a shared CAC limits pool object. A shared CAC-limits pool is a global resource that helps define define multi-level Call Admission Control (CAC) policy by linking trunk groups together in a pyramid-type structure. Trunk groups are assigned to shared CAC-limits pools, and sets of CAC-limits pools can be assigned a parent to create a higher-level shared CAC-limit pool. Refer to Shared CAC-Limits Pool - CLI for more information on this capability.

Info
titleNote

Refer to SBC Provisioning Limits for Shared CAC Limits Pool limitations.

To View Shared CAC Limits Pool

...

Caption
0Figure
1Global - Cac - Shared Cac Limits Pool Main
 

To Edit a Shared CAC Limits Pool

...

Caption
0Figure
1Global - Cac - Shared Cac Limits Pool Highlighted
 

 

The Edit Selected Shared CAC Limits Pool window is displayed below.

 
Caption
0Figure
1Global - CAC - Shared CAC Limits Pool Edit Window

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.

...

 
Caption
0Figure
1Global - Cac - Shared Cac Limits Pool Fields

The Create New Shared CAC Limits Pool window is displayed.

Caption
0Figure
1Global - CAC - Shared CAC Limits Pool Create Window
 

The following fields are displayed:

Caption
0Table
1Shared CAC Limits Pool
 


Parameter

Description

Name

Specifies the name for this shared CAC-Limits pool.

Parent Shared CAC Limits Pool Name

Specifies an existing shared CAC-Limits pool to be the parent of this CAC-Limits pool.

Call Limit

Specifies the total number of concurrent calls (either ingress or egress) allowed. The value range from 0 - 2000000000 calls.

Call Limit
Threshold

Specifies the concurrent calls notification threshold. The value range from 0 - 100%.

Bandwidth
Limit

Specifies the total media bandwidth limit in K bits/second. The value range from 0 - 2000000000 k bits/second

Bandwidth Limit Threshold

Specifies the bandwidth utilization notification threshold. The value range from 0 - 100%.

Emergency Oversubscription

Specifies the oversubscription of resources (As percentage) that is allowed for emergency calls. When the baseline call limit and the bandwidth limit are reached, normal calls will be blocked and only emergency calls will be allowed up to this additional percentage. The value range from 0 - 100%.

Registration
Limit

Specifies the total number of concurrent SIP registrations allowed. The value range from 0 - 2000000000 registrations.

Subscription
Limit

Specifies the total number of concurrent SIP subscriptions allowed. The value range from 0 - 2000000000 subscriptions.

Make the required changes to the required fields and click Save to save the changes.

...

Caption
0Figure
1Global - CAC - Shared CAC Limits Pool Highlighted
 


 

Click Copy Shared CAC Limits Pool tab on the Shared CAC Limits Pools List panel.

Caption
0Figure
1Global - CAC - Shared CAC Limits Pool Fields
 

The Copy Selected Shared CAC Limits Pool window is displayed along with the field details which can be edited.

Caption
0Figure
1Global - CAC - Shared CAC Limits Pool Copy Window
 

The following fields are displayed:

 
Caption
0Table
1Shared CAC Limits Pool Copy


Parameter

Description

Name

Specifies the name of the shared CAC-Limit pool.

Parent Shared Cac Limits Pool Name

Specifies an existing CAC-Limits pool to be the parent of this CAC-Limits pool..

Call Limit

Specifies the total number of concurrent calls (either ingress or egress) allowed. The value range from 0 - 2000000000 calls.

Call Limit
Threshold

Specifies the concurrent calls notification threshold. The value range from 0 - 100%.

Bandwidth
Limit

Specifies the total media bandwidth limit in K bits/second. The value range from 0 - 2000000000 k bits/second

Bandwidth Limit Threshold

Specifies the bandwidth utilization notification threshold. The value range from 0 - 100%.

Emergency Oversubscripti on

Specifies the oversubscription of resources (As percentage) that is allowed for emergency calls. When the baseline call limit and the bandwidth limit are reached, normal calls will be blocked and only emergency calls will be allowed up to this additional percentage. The value range from 0 - 100%.

Registration
Limit

Specifies the total number of concurrent SIP registrations allowed. The value range from 0 - 2000000000 registrations.

Subscription
Limit

Specifies the total number of concurrent SIP subscriptions allowed. The value range from 0 - 2000000000 subscriptions.

Ingress 

Call Rate Max

Specifies the maximum sustained ingress call rate allowed in calls per second. (range: 1-450, or unlimited.

Spacevars
0series4
range is 1-1350, or unlimited).

Note

You can set both Call Burst Max and Call Rate Max as unlimited; however, if you assign a value to one parameter, the other must also be assigned a value.


Call Burst Max

Specifies the maximum allowed burst size (above the allowed sustained rate) for ingress call attempts, in calls per second. (range: 1-900, or unlimited.
Spacevars
0series4
range is 1-2700, or unlimited).

Register Rate Max

Specifies the maximum sustained ingress rate (registrations per second) of initial SIP registrations allowed. (range: 1-1000, or unlimited.

Spacevars
0series4
range is 1-3000, or unlimited)

Note

You can set both Register Burst Max and Register Rate Max as unlimited; however, if you assign a value to one parameter, the other must also be assigned a value.


Register Burst Max

Specifies the maximum allowed burst (above the allowed sustained rate) for ingress initial SIP registrations. (range: 1-1000, or unlimited.

Spacevars
0series4
range is 1-3000, or unlimited)

Call Limit

Specifies the total number of concurrent calls (either ingress or egress) allowed on ingress. The value ranges from 0 to 2147483647 or unlimited (default).

Emergency Oversubscription

Specifies the oversubscription of resources (as a percentage) that is allowed for emergency calls. The value ranges from 0 to 1000 and the default value is 10.

Extended Emergency Ip Limit

The resource oversubscription (expressed as numeric value) allowed for emergency calls. The value ranges from 0 to 40000 with a default value of 0.

Subscribe Rate Max

Specifies the maximum sustained ingress rate (subscribes per second) of initial SIP subscribe request. (range: 1-1000, or unlimited.
Spacevars
0series4
range is 1-3000, or unlimited)
Subscribe Burst Max
Specifies the maximum allowed burst (above the allowed sustained rate) for ingress initial SIP subscribe request. (range: 1-1000, or unlimited.
Spacevars
0series4
range is 1-3000, or unlimited)

Other Req Rate Max

Specifies the maximum sustained ingress rate (requests per second) of other out-of-dialog SIP requests. (range: 1-1000, or unlimited.

Spacevars
0series4
range is 1-3000, or unlimited).

Egress

Call Rate Max

Specifies the maximum sustained egress call rate allowed in calls per second. (range: 1-200, or unlimited. (range: 1-450, or unlimited.

Spacevars
0series4
range is 1-1350, or unlimited).

Note

You can set both Call Burst Max and Call Rate Max as unlimited; however, if you assign a value to one parameter, the other must also be assigned a value.


Call Burst Max

Specifies the maximum allowed burst size (above the allowed sustained rate) for egress call attempts, in calls per second. (range: 1-900, or unlimited.
Spacevars
0series4
range is 1-2700, or unlimited).

Register Rate Max

Specifies the maximum sustained egress rate (registrations per second) of initial SIP registrations allowed. (range: 1-1000, or unlimited.

Spacevars
0series4
range is 1-3000, or unlimited).

Note

You can set both Register Burst Max and Register Rate Max as unlimited; however, if you assign a value to one parameter, the other must also be assigned a value.


Register Burst Max

Specifies the maximum allowed burst (above the allowed sustained rate) for egress initial SIP registrations. (range: 1-1000, or unlimited.

Spacevars
0series4
range is 1-3000, or unlimited).

Call Limit

Specifies the total number of concurrent calls (either ingress or egress) allowed on egress. The value ranges from 0 to 2147483647 or unlimited (default).

Emergency Oversubscription

Specifies the oversubscription of resources (as a percentage) that is allowed for emergency calls. The value ranges from 0 to 1000 and the default value is 10.

Entended Emergency Ip Limit

Specifies the maximum sustained egress rate (registrations per second) of initial SIP registrations allowed. The value ranges from 0 to 40000 and the default value is 0.

Subscribe Rate Max

Specifies the maximum sustained egress rate (subscribes per second) of initial SIP subscribe request. (range: 1-1000, or unlimited.
Spacevars
0series4
range is 1-3000, or unlimited).
Subscribe Burst Max
Specifies the maximum allowed burst (above the allowed sustained rate) for egress initial SIP subscribe request. (range: 1-1000, or unlimited.
Spacevars
0series4
range is 1-3000, or unlimited) .

Other Req Rate Max

Specifies the maximum sustained egress rate (requests per second) of other out-of-dialog SIP requests. (range: 1-1000, or unlimited.

Spacevars
0series4
range is 1-3000, or unlimited).

Make the required changes to the required fields and click Save to save the changes. The copied Shared CAC Limits Pool is displayed at the bottom of the original Shared CAC Limits Pool in the Shared CAC Limits Pool List panel.

...