Page History
...
Info | ||
---|---|---|
The screen shot below is for an SBC 2000. | ||
Panel | ||
| ||
Caption | ||
0 | Figure | 1 |
SIP Signaling Group - ICE-Lite Configuration
The following fields must be configured to enable the ICE-Lite feature:
ICE Support
...
...
ICE Support - Field Definition
Field | Location | Definition |
---|---|---|
ICE Support | Settings > SIP Signaling Group | Enables/disables ICE support. This field must be enabled for ICE-Lite to be active. |
Pagebreak
ICE Mode
...
...
ICE Mode - Field Definition
Field | Location | Recommended Configuration |
---|---|---|
ICE Mode | Settings > SIP Signaling Group | Specifies the Interactive Connection Establishment (ICE) mode. Valid entries: For SBC 1000/2000: Lite or Full. To access the ICE-Lite feature, set this field to Lite. For SBC SWe |
...
Edge: This field is configured as Lite automatically when ICE support is Enabled. |
Interoperability Notes
ICE-Lite impacts the following on the SBC 1000/2000 and SBC SWe LiteEdge.
SBC Feature | Supports | Does not Support | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ICE Restarts The
| ||||||||||||||
TURN server operation The
the SBC is unable to establish connectivity between endpoints in such scenarios. | ||||||||||||||
STUN Server Operation with Full ICE Mode Only The
| ||||||||||||||
Internet Connection Using UDP Candidate As an ICE-Lite agent (controlled agent only) , the
| ||||||||||||||
RTP and RTCP Media The
| ||||||||||||||
Ports for RTP and RTCP The
| ||||||||||||||
IPv4 Support Only As an ICE-Lite agent, the
|
...