Page History
...
- In the WebUI, click the Tasks tab.
- In the left navigation panel, go to SBC Easy Setup > Easy Config Wizard.
From the Application drop down list, select IP PBX.
Configure per the field definitions below and click Next.
Caption 0 Figure 1 Configure IP PBX Caption 0 Table 1 Configure Scenario Parameters - Field Definitions
Field Description Application Configuration template used: IP PBX. Scenario Description Name to describe the setup. Telephone Country Country in which the IP PBX is setup. SIP Sessions Number of simultaneous SIP Sessions. Valid entry: 1 - 960. Type IP PBX Type. Valid selections: - Avaya SM/CM
- Cisco CUCM
- Other IP PBX
Step 2: Configure IP PBX for Endpoint
...
- Configure the IP PBX information.
- Click Next.
...
0 | Figure |
---|---|
1 | Step 2 Example Screen |
Avaya SM/CM
The fields below are displayed if you select Avaya SM/CM from the Type drop down list in Step 1.
...
...
Configure Avaya SM/CM
Field | Description |
---|---|
Host | Host IP or FQDN. |
Protocol | IP protocol used for sending and receiving SIP messages between SBC and the server. Valid entries are UDP and TCP. |
Port Number | Port number used for sending and receiving SIP messages. |
Use Secondary Server | Enables or disables the secondary Remote Peer service provider configured. Valid entry: Disabled or Enabled. |
Secondary Server Host | Specifies the Secondary host. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Server is Enabled. |
Protocol | The Protocol used for communicating with the Secondary Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Server is Enabled. |
Port number | Specifies the Port Number used for sending and receiving messages between the SBC and the Secondary Server. This field displays only when Use Secondary Server is Enabled. |
Cisco CUCM
The fields below are displayed if you select Cisco CUCM from the Type drop down list in Step 1.
...
...
Configure CISCO CUCM
Field | Description |
---|---|
Host | Host IP or FQDN. |
Protocol | IP protocol used for sending and receiving SIP messages between SBC and the server. Valid entries are UDP and TCP. |
Port Number | Port number used for sending and receiving SIP messages. |
Use Secondary Server | Enables or disables the secondary Remote Peer service provider configured. Valid entry: Disabled or Enabled. |
Secondary Server Host | Specifies the Secondary host. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Server is Enabled. |
Protocol | The Protocol used for communicating with the Secondary Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Server is Enabled. |
Port number | Specifies the Port Number used for sending and receiving messages between the SBC and the Secondary Server. This field displays only when Use Secondary Server is Enabled. |
Other IP PBX
The fields below are displayed if you select Other IP PBX from the Type drop down list in Step 1.
...
Configure Other IP PBX
Field | Description |
---|---|
Host | Host IP or FQDN. |
Protocol | IP protocol used for sending and receiving SIP messages between SBC and the server. Valid entries are UDP and TCP. |
Port Number | Port number used for sending and receiving SIP messages. |
Use Secondary Server | Enables or disables the secondary Remote Peer service provider configured. Valid entry: Disabled or Enabled. |
Secondary Server Host | Specifies the Secondary host. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Server is Enabled. |
Protocol | The Protocol used for communicating with the Secondary Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Server is Enabled. |
Port number | Specifies the Port Number used for sending and receiving messages between the SBC and the Secondary Server. This field displays only when Use Secondary Server is Enabled. |
Step 3: Summary
Easy Configuration Step 3 includes a summary of the information configured in Step 1 and Step 3.
...
See below for an example:
...