Page History
Panel | ||||
---|---|---|---|---|
In this section:
|
Add_workflow_for_techpubs | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Overview
The
is certified to offer Microsoft Teams Direct Routing services; the Spacevars 0 product
can be used to connect any Teams client to: Spacevars 0 product
- A PSTN trunk, whether based on TDM (e.g. PRI, BRI, etc.), CAS, or SIP
- 3rd-party, non-Teams-certified SIP/TDM based PBXs, analog devices, and SIP clients
These instructions detail how to configure the
(SBC 1000/2000 and Spacevars 0 product
) to connect Microsoft Teams Direct Routing services deployed in an Enterprise network (On Premises). For public cloud deployments, refer to Connect SBC SWe Edge to Microsoft Teams Direct Routing Deployed in Azure. The network diagram below displays the connection topology for Microsoft Teams Direct Routing deployed in an Enterprise network. Spacevars 0 series3
SBC Edge Portfolio connects to Microsoft Teams Direct Routing Deployed in an Enterprise Network
Pagebreak |
---|
Step 1: Install
Spacevars | ||
---|---|---|
|
Multiexcerpt | |||||||||
---|---|---|---|---|---|---|---|---|---|
| |||||||||
These instructions assume the
Caption | | ||||||||
0 | Table |
Product | Installation | ||||
---|---|---|---|---|---|
| On KVM: Installing SBC SWe |
On VMware ESXi: Installing SBC SWe |
On Hyper-V: Installing SBC SWe |
SBC 1000 | Installing the SBC 1000 Hardware |
SBC 2000 |
Pagebreak |
---|
Step 2: Review Prerequisites for Microsoft Teams Direct Routing
Include Page | ||||
---|---|---|---|---|
|
Step 3: Configure Office 365 Tenant Voice Routing
A Tenant is used within the Microsoft environment as a single independent enterprise that has subscribed to Office 365 services; through this tenant, administrators can manage projects, users, and roles. Access the Tenant configuration and configure as detailed below. (For details on accessing the Tenant, refer to Microsoft Teams Documentation).
Create Online PSTN Gateway that points to the SBC:
Enter the SBC FQDN (Example below: aepsite6.SonusMS01.com). The FQDN must be configured for the Tenant in both the Domains and the DomainUrlMap fields.
Enter the SBC SIP Port (Example below - SipPort5061).
Code Block New-CsOnlinePSTNGateway -Fqdn aepsite6.SonusMS01.com -SipSignallingPort SipPort5061 -MaxConcurrentSessions <Max Concurrent Session which SBC capable handling> -Enabled $true
Configure Teams usage for the user:
Enter the User Identity (Example below: -user1@domain.com)
Code Block |
---|
Get-CsOnlineUser -Identity user1@domain.com Set-CsUser -Identity user1@domain.com -EnterpriseVoiceEnabled $true -HostedVoiceMail $true -OnPremLineURI tel:+10001001008 Grant-CsOnlineVoiceRoutingPolicy -PolicyName "GeneralVRP" -Identity user1@domain.com Grant-CsTeamsCallingPolicy -PolicyName AllowCalling -Identity user1@domain.com Grant-CsTeamsUpgradePolicy -PolicyName UpgradeToTeams -Identity user1@domain.com |
Pagebreak |
---|
Step 4: Configure
Spacevars | ||
---|---|---|
|
The
Spacevars | ||
---|---|---|
|
- Access the WebUI. Refer to Logging into the SBC Edge.
- Click on the Tasks tab.
- From the left side menu, click SBC Easy Setup > Easy Config Wizard.
From the Application drop down box, select the relevant Easy Configuration wizard. Depending on your network, follow a relevant Easy Configuration wizard. Refer to the table below for guidance.
caption1 0 Table Easy Configuration - Microsoft Teams Direct Routing Configuration
Deployment Type Refer to Configuration: SBC Connects to Microsoft Teams via SIP Trunk SIP trunks ↔ Microsoft Phone System Direct Routing SBC Connects to Microsoft Teams via PSTN Provider through ISDN. ISDN PSTN ↔ Microsoft Phone System Direct Routing SBC connects to Microsoft Teams via IP PBX IP PBX ↔ Microsoft Phone System Direct Routing - For an SBC behind the NAT deployment only: In Step 2 of the Easy Configuration wizard, ensure the following is configured:
- From the Outbound NAT Traversal drop down list, select Enable. Allows the SBC to be placed behind a NAT device, and uses the IP of the NAT device for all outgoing messages.
- In the Public IP Address, enter the Public IP of the NAT device. The SBC uses this IP as the source IP for all the outgoing messages.
The Configuration Wizard is complete.
Info For the SBC 1000/SBC 2000 only:
By default, when configuring the SBC with Easy Configuration, the default Ethernet Interface for Border Element (PSTN Endpoint) is configured as Auto. Ribbon recommends changing this configuration manually to the Ethernet port that points to the SIP Trunk side.
For instructions on changing the Ethernet interface, refer to: Configuring and Modifying Logical Interfaces.
Pagebreak |
---|
Step 5: Confirm Spacevars0 product
Links to Microsoft Teams
0 | product |
---|
Multiexcerpt | ||
---|---|---|
| ||
For troubleshooting steps, refer to Best Practice - Troubleshoot Issues with Microsoft Teams Direct Routing. |
Pagebreak |
---|
Step 6: Place a Test Call
Multiexcerpt | ||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||||||||
Place a test call as follows:
The test call is now complete. For troubleshooting steps, refer to Best Practice - Troubleshoot Issues with Microsoft Teams Direct Routing. |