Page History
...
Scenario Parameters - Field Definitions
...
...
Step 1
Application
| Panel | ||||
|---|---|---|---|---|
| ||||
Click the arrow to select the scenario that describes your deployment. In this case, select SIP Trunk ↔ Microsoft On Premises. |
...
These fields apply if you selected ATT SIP Trunk in Step 1 - Select Scenario.
...
...
ATT SIP Trunk
Border Element Server
| Panel | ||||
|---|---|---|---|---|
| ||||
The FQDN or IP address of the Remote Peer service provider. |
...
These fields apply if you selected KDDI SIP Trunk in Step 1 - Select Scenario.
...
...
KDDI SIP Trunk Anchor
KDDI SIP Trunk
...
KDDI SIP Trunk
SIP Server
| Panel | ||||
|---|---|---|---|---|
| ||||
Type the FQDN for the service provider's SIP server. |
...
| Panel | ||||
|---|---|---|---|---|
| ||||
Domain name associated with the DNS IP address. | ||||
| Caption | ||||
| 0 | Figure |
Select ISDN Ports
| Pagebreak |
|---|
NTT DOCOMO Officelink- Field Definitions
These fields apply if you selected NTT DOCOMO Officelink in Step 1 - Select Scenario.
...
NTT DOCOMO Officelink Trunk
Office Link FOMA-R
| Panel | ||||
|---|---|---|---|---|
| ||||
| The Host IP address of the SIP Server. |
...
| Panel | ||||
|---|---|---|---|---|
| ||||
The IP protocol to use for sending and receiving SIP messages between SBC and the Server Pool Host. Valid entry: TLS or TCP. |
Port numberNumber
The Port Number (via TLS or TCP) used for sending and receiving SIP messages between SBC and the Server Pool Host. Default value: 5067.
...
These fields apply if you selected Other SIP Trunk in Step 1 - Select Scenario.
...
...
...
Other SIP Trunk
Border Element Server
| Panel | ||||
|---|---|---|---|---|
| ||||
The FQDN or IP address of the Remote Peer service provider. |
...
These fields apply if you select SoftBank ConnecTalk in Step 1 - Select Scenario.
...
SoftBank ConnecTalk
Primary SIP Server
| Panel | ||||
|---|---|---|---|---|
| ||||
The host IP address or FQDN of the primary SIP server. |
...
These fields apply if you selected SoftBank White Office in Step 1 - Select Scenario.
...
SoftBank White Office
WAN Link
| Panel | ||||
|---|---|---|---|---|
| ||||
The method used for connecting networks. Options are: Routerless and Router. On selection of Routerless, the Easy Config displays the Signaling/Media Source IP field and the SIP Server field. On selection of Router, the Easy Config displays the SIP Server field only. |
...
These fields apply if you selected Telstra Enterprise SIP Connect in Step 1 - Select Scenario.
...
Telstra Enterprise SIP Connect
NAT Public Interface
| Panel | ||||
|---|---|---|---|---|
| ||||
The public interface used for Network Address Translation (NAT). |
...
These fields apply if you selected Verizon SIP Trunk in Step 1 - Select Scenario.
...
Verizon Managed Service
...
Border Element Server
| Panel | ||||
|---|---|---|---|---|
| ||||
The FQDN or IP address of the Remote Peer service provider. |
...
| Include Page | ||||
|---|---|---|---|---|
|
| Field | Description |
|---|---|
| Border Element Server | The FQDN or IP address of the Remote Peer service provider. |
| Protocol | The IP protocol used for sending and receiving SIP messages between the SBC and the Border Element Server. Valid entries: UDP or TCP. |
| Port Number | The port number for the SIP server used to send and receive SIP messages between the SBC and the Border Element Server. |
| Use Secondary Border Element Server | Enables or disables the secondary Remote Peer service provider configured. |
| Secondary Border Element Server | Specifies the Secondary Border Element Service provider. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Border Element Server is Enabled. |
| Protocol | The Protocol used for communicating with the Secondary Border Element Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled. |
| Port Number | The Port Number is used for sending and receiving messages between SBC and the Secondary Border Element server. This field is available only when Use Secondary Border Element Server is Enabled. |
| Signaling/Media Source IP | Select the external (Internet-facing) IP address for the server that handles routing of messages for signaling and media. |
| Outbound NAT IP | Allows the SBC to be placed behind a NAT device, and uses the IP of the NAT device for all outgoing messages. If this field is set to Enable, the Public IP address field configuration is required. Valid selections:
NOTE: This field is required when the SBC interface has a private IP and the NAT device is using a public IP. For details on configuring an SBC behind the NAT, refer to Configuring the SBC Edge for NAT Traversal. |
Server Pool Host (Skype for Business)
The Pool name of the Skype for Business / Lync Server (FQDN).
Protocol
The IP protocol used for sending and receiving SIP messages between SBC and the Server Pool Host. Valid entry: TLS or TCP.
Port Number
The Port Number (via TLS or TCP) used for sending and receiving SIP messages between SBC and the Server Pool Host.
...
This example displays a SIP ↔ Microsoft On Premises configuration with a KDDI SIP Trunk.
...
Step 3
...
pagebreak
Overview
Content Tools