Page History
...
Scenario - Field Definitions
| Section | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Application
| Panel | ||||
|---|---|---|---|---|
| ||||
The scenario in which the configuration template is provided. In this case, select FXO ↔ Microsoft On Premises. |
...
FXO - Field Definitions
| Section | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Calibrate FXO Ports
| Panel | ||||
|---|---|---|---|---|
| ||||
Enables/disables FXO Port calibration. FXO Port Calibration function determines the optimum impedance and the local loop type settings and configures each selected port accordingly, which eliminates impedance mismatching. Impedance mismatching results in audible echos on the line and reduced call quality. Correctly matching the line impedance reduces or eliminates the echo. A number of factors influence the line impedance: line types that vary from country to country, line types that vary between geographic regions, and the distance between the node and the central office. Options: Yes (FXO port calibration is executed) or No (FXO port calibration is not executed). |
...
| Panel | ||||
|---|---|---|---|---|
| ||||
| Specify the physical FXO port number to which the FXO line is physically connected. Configure FXO port entries using the following command buttons: Up (move a port up in the list), Down (move a port down in the list), Add/Edit (adds or changes a port), and Remove (deletes a port). For example, click Add/Edit to add a port. Click the check box for the desired FXO port, and then click OK. Caption | | |||
| 0 | Figure | 1 |
Phone Number
| Panel | ||||
|---|---|---|---|---|
| ||||
The phone number associated with the FXO ports specified. This field is available only when Provider Hunt Group is Enabled. |
...
This example displays a FXO ↔ Microsoft On Premises setup.
| Section | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Overview
Content Tools