Page History
...
- In the WebUI, click the Tasks tab.
In the left navigation pane, click System > Firmware Upgrade.
Perform a Backup on the configuration file.
Panel borderStyle none Caption 0 Figure 1 Backup on Configuration File Enter an optional Passphrase (see Using the Custom Passphrase).
Under Select File, click the Browse button and select the SBC firmware file listed in the general SBC Upgrade guide to upload.
Panel borderStyle none Caption 0 Figure 1 Upload Firmware Click Upgrade. The following warning popup will be displayed:
Panel borderStyle noneCaption 0 Figure 1 Warning Popup Pagebreak
Click OK to upload the new firmware. Do not close or navigate away from the browser window, or you may receive partial results. Throughout the upload process, the web interface displays update messages to indicate the progression of the upgrade, as shown below. (If you navigate to this view from another browser, it will also display the progress.) Once the upgrade is complete, the system automatically reboots.Anchor Software Upload Software Upload Panel borderStyle none Caption 0 Figure 1 Upgrade Progress
Info |
---|
An average upgrade takes about 8 - 9 minutes. During the upgrade process, the remaining time estimates in the different steps becomes more accurate as the process progresses. |
...
Tip | ||
---|---|---|
| ||
Upon completion, you will be automatically redirected to the Login screen. Verify that you are booting from the new partition either by checking the active partition, or by Viewing the Software Version. |
...