attribute_name | data_type | Call Type | VSA Number | Default Value | Attribute Sent On Stop | Description |
---|
NET-Session-Ingress-CallId | integer | ISDN/CAS/SIP | 60 | 65535 | No | This ID corresponds to INBOUND Call leg of the same call.0xFFFF(65535) is an INVALID number and is used to indicate that the value needs to be ignored. |
NET-Session-Egress-CallId | integer | ISDN/CAS/SIP | 61 | 65535 | No | This ID corresponds to OUTBOUND Call leg of the same call.0xFFFF(65535) is an INVALID number and is used to indicate that the value needs to be ignored. |
NET-Session-Generic-Id | integer | ISDN/CAS/SIP | 62 | 0 | No | Describes call identifier (conference ID)0 - Invalid. |
NET-Routing-Table-Number | integer | ISDN/CAS/SIP | 63 | 0 | Yes | Routing table number selected for this call. 0 is an INVALID number and is used to indicate that the value needs to be ignored. |
NET-Ingress-Signaling-Group | integer | ISDN/CAS/SIP | 64 | 0 | No | Incoming signaling group. 0 is an INVALID number and is used to indicate that the value needs to be ignored. Valid range:1 - 10000 - SIP SG,10001 - 20000 - ISDN SG,20001 - 30000 - CAS SG This attribute is applicable only for INBOUND Call legs. |
NET-Egress-Signaling-Group | integer | ISDN/CAS/SIP | 65 | 0 | No | Outgoing signaling group. 0 is an INVALID number and is used to indicate that the value needs to be ignored. Valid range: 1 - 10000 - SIP SG,10001 - 20000 - ISDN SG,20001 - 30000 - CAS SG This attribute is applicable only for OUTBOUND Call legs. |
NET-Primary-Routing-Number | string | ISDN/CAS/SIP | 66 |
| Yes | Primary routing number. Empty string is used to indicate that the value needs to be ignored. "" - Invalid. |
NET-Egress-Final-Routing-Num | string | ISDN/CAS/SIP | 67 |
| Yes | Final routing number. Empty string is used to indicate that the value needs to be ignored. " - Invalid this is valid only for Ingress call. For Egress call, it will have default value of 0. |
NET-Ingress-Channel-Number | integer | ISDN/CAS/SIP | 68 | 0 | No | Incoming channel number. 0 is an INVALID number and is used to indicate that the value needs to be ignored. Valid range: 1 - 1000This attribute are applicable only for INBOUND Call legs. |
NET-Egress-Channel-Number | integer | ISDN/CAS/SIP | 69 | 0 | No | Outgoing channel number. 0 is an INVALID number and is used to indicate that the value needs to be ignored. Valid range:1 - 1000. This attribute are applicable only for OUTBOUND Call legs. |
NET-Call-Type | integer | ISDN/CAS/SIP | 70 | 0 | Yes | Describes the call type. 0 = unset 1 = Voice 2 = T38 Fax 6 = Secure Media Inbound Only 7 = Secure Media Outbound Only 8 = Secure Media Inbound/Outbound 9 = Secure Media Passthrough 11 = Fax_PassThrough 12 = Modem_PassThrough Note: In case of TDM to TDM calls only "1=voice" is supported. ZERO is used to indicate that the value needs to be ignored. |
NET-Call-Origin | integer | ISDN/CAS/SIP | 71 | 0 | No | Describes the call direction. 0=eINVALID,1=eINBOUND,2=eOUTBOUND,0 is an INVALID number and is used to indicate that the value needs to be ignored. |
NET-Calling-Number | string | ISDN/CAS/SIP | 72 |
| No | Calling number. "" - Invalid. Note: Special config setting required for CAS. NET-Calling-Number attribute for FXS requires assigning Own Number to applied ports. Under Web UI - System tab Select the CAS SG entry from the Signaling Group, click on Channel Hunting pull down list and select the Own Number. Assign the ports with calling phone number. |
NET-Called-Number | string | ISDN/CAS/SIP | 73 |
| No | Called Number. "" - Invalid. |
NET-Calling-Name | string | ISDN/CAS/SIP | 74 |
| No | Calling Name, if present. |
NET-Disconnect-Cause | integer | ISDN/CAS/SIP | 75 | 0 | Yes | Disconnect cause - Must for Disconnect case. 0 is used to indicate that the value needs to be ignored. |
NET-Abort-Cause | integer | ISDN/CAS/SIP | 76 | 0 | Yes | Terminate Abort cause - Must for Terminate Abort case. 0 is used to indicate that the value needs to be ignored. |
NET-Ingress-Channel-Id | string | ISDN/CAS/SIP | 77 |
| No | ISDN/CAS : Card:Port:Channel, SIP : Card:SGID:Channel. Null indicates no value provided and needs to be ignored. This attribute are applicable only for INBOUND Call legs. |
NET-Egress-Channel-Id | string | ISDN/CAS/SIP | 78 |
| No | ISDN/CAS : Card:Port:Channel, SIP : Card:SGID:Channel. Null indicates no value provided and needs to be ignored. This attribute are applicable only for OUTBOUND Call legs. |
NET-Call-Priority | string | ISDN/CAS/SIP | 79 |
| No | Call priority, if present. |
NET-Recording-Type | string | SIP | 80 | NA | No | If Recording Type is SIPREC set to “SIP Recording”. |
NET-Recording-Leg | string | SIP | 81 | NA | No | Which leg is getting recorded Egress or Ingress. |