Page History
Anchor
...
In the SBC Installer Boot Menu screen press Enter to begin the installation.
Caption 0 Figure 1 Installation Window The OS installation begins.
Include Page SBXDOC101:Screenshot_disclaimerSBXDOC101: Screenshot_disclaimer After installation completes press Enter.
You will be prompted to enter the log on details:Caption 0 Figure 1 Login Information .
Enter
linuxadmin
as the login andsonus
as the password.Caption 0 Figure 1 Root Login Enter the following command to login as
root
withsonus1
as the password.Code Block language none su - root
You are prompted to enter the IP information:
Caption 0 Figure 1 IP Address - Enter management IP address.
- Enter network mask address.
- Enter gateway IP address.
You will be prompted to set IPv6 address. Perform one of the following steps:
Enter y to set IPv6
Enter IPv6 management IP address.
- Enter the prefix length for IPv6.
Enter IPv6 gateway address.
Caption 0 Figure 1 IPv6 Details
Enter n if you do not want to set IPv6.
Caption 0 Figure 1 Network Configuration
...
Enter the command to get the MAC address mapped with the interface:
Code Block language none ifconfig -a
Or
Enter the command to get MAC address of a specific interface. For example, management interface, execute the following command:Code Block language none ifconfig mgt0
Include Page SBXDOC101:Screenshot_disclaimerSBXDOC101: Screenshot_disclaimer Caption 0 Figure 1 MGT MAC Address Note the MAC address for each interface. For example, in the above screen, the MAC address for mgt0 is 52:54:00:d7:f3:69.
...