Page History
...
- On the VMware platform only, before beginning the upgrade, disable the CPU reservation check inside the guest by renaming the file: vmware-toolbox-cmd. For example, issue the following command:
mv /usr/bin/vmware-toolbox-cmd /usr/bin/vmware-toolbox-cmd.bak - Stop standby SBC by issuing "sbxstop". Wait until the SBC processes stop.
- Shutdown the standby SBC by issuing "power off" command.
- Increase vCPU count on the powered off standby SBC.
- Stop active SBC by issuing "sbxstop". Wait until the SBC processes stop. Note that this is service affecting since both SBCs are stopped now.
- Shutdown the active SBC by issuing "power off" command.
- Increase vCPU count on the powered off active SBC.
- Power on an active SBC. Wait for the SBC to fully start as active.
- Power on a standby SBC. The SBCs should start as standby and get in sync with active SBC.
| Info | ||
|---|---|---|
| ||
For any other CPU upgrade combination, use the procedure below: Copy the procedure on this page but modify any reference to 8.x and change to 9.x as applicable |
Overview
Content Tools