Add_workflow_for_techpubs

AUTH1	UserResourceIdentifier{userKey=8a00a0c85b2726c2015b58aa779d0003, userName='null'}
JIRAIDAUTH	SYM-28067
REV5	UserResourceIdentifier{userKey=8a00a0c85b2726c2015b58aa779d0003, userName='null'}
REV6	UserResourceIdentifier{userKey=8a00a0c85b2726c2015b58aa779d0003, userName='null'}
REV3	UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26ca2f03d1, userName='null'}
REV4	UserResourceIdentifier{userKey=8a00a0c86c5a262b016c6b3bcd1d0008, userName='null'}
REV1	UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26c99e02c0, userName='null'}

Section

Column

width	40%

Panel

In this section:

Table of Contents

Column

Info

icon	false

Overview

Info
In the WebUI Signaling Group options, when when the Outbound NAT Traversal field is set to Static NAT, the name of the Signaling/Media Source IP option changes to Signaling /Media Private IP. For details on these fields, refer to Creating and Modifying SIP Signaling Groups.

This article describes the SG Signaling/Media Source IP and NAT Traversal configuration.

...

The call route specifies the egress SG.
If the SG Signaling/Media Source IP is set to Auto, the egress Ethernet is selected by the best match in the IP Routing Table.
If the SG Signaling/Media Source is set to a specific Ethernet/IP interface, the INVITE is forwarded out that specified port; however, the IP Route Table must have an IP Route to the destination network. Even when a specific port is selected, the IP Routing engine must still be able to route the packet towards the destination IP network.

...

Note
The Signaling/Media IP Source configuration overrides the IP Routing Table for selecting a particular egress Ethernet interface. Regardless, the IP Route Table must contain the appropriate routing entries for the SBC to send the packet towards the destination IP network.

...

Space shortcuts