Versions Compared

Old Version 5

changes.mady.by.user Ribbon Communications

Saved on

compared with

New Version 6

changes.mady.by.user Ribbon Communications

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Add_workflow_for_techpubs
AUTH1
JIRAIDAUTHSYM-2791428481
REV5
REV6
REV3
REV4
REV1REV2

Panel

Table of Contents

Available_since
TypeAvailable Since
Release8.1.5

...

  • Call made to and from a Teams client that is internal to the customer network:
    • The Proxy 
      Spacevars
      0product2
      consumes the Proxy Media Mode with Encryption resource.
    • The Downstream 
      Spacevars
      0product2
      consumes the SIP with corresponding RTP Media resource.
  • Call made to and from a Teams client that is external to the customer network:
    • The Proxy 
      Spacevars
      0product2
      consumes the SIP with corresponding RTP Media resource.
    • The Downstream 
      Spacevars
      0product2
      consumes the SIP with corresponding RTP Media resource.

Microsoft Certified Endpoints

When using LMO for a Proxy Downstream SBC deployment, all endpoints must Microsoft compliant/certified. 

Firmware Requirement

The Proxy 

Spacevars
0product2
requires the following firmware:

  • Spacevars
    0product3
    : Release 8.1.5 Build 239 and later, or Release 9.0.0 and later
  • Spacevars
    0product
    : TEAMS_MEDIAOP build 13  Release 9.0 Build 573 and later.

Spacevars
0company
 recommends the following versions for the Downstream 
Spacevars
0product2
for an easier configuration:

  • Spacevars
    0product3
    : Release 8.1.5 Build 239 and later, or Release 9.0.0 and later
  • Spacevars
    0product
    : TEAMS_MEDIAOP build 13Release 9.0 Build 573 and later.
Info
titleNote

This document outlines only the recommended firmware.

...

...

Info
titleNote

This section applies to only the Proxy SBC for the 

Spacevars
0product3
Release 8.1.5.

Use the following procedure to disable the Validate Server FQDN in the TLS Profile.

...

Info
titleNote

The information to prepare a Downstream SBC applies to both the

Spacevars
0longproduct
and
Spacevars
0product3
unless otherwise stated.


Info

When the SBC Edge is acting as the Downstream SBC and interacting with the SBC Core, the Key Identifier Length in the SRTP should be configured as "0". The SBC Core does not support MKI and ignores the Crypto lines which as the MKI parameter.


Install 
Spacevars
0product2
and Perform Initial Setup

...

If your deployment requires a different certificate for the Downstream

Spacevars
0product2
, see Configure and Generate Certificates on the SBC.

Configure Proxy FQDN Resolution on Downstream
Spacevars
0product2

...