Page History
...
Add_workflow_for_techpubs AUTH1 JIRAIDAUTH SYM-2800528205 REV5 REV6 REV3 REV1
To Create a Link Monitor Table entry:
...
- At the top of the Link Monitor Configuration table, click the Create Link Monitor Configuration (
) icon.
Configure the fields. Refer to Field Definitions.
Caption 0 Figure 1 Create Link Monitor Configuration 
- Click OK.
| Anchor | ||||
|---|---|---|---|---|
|
...
| Panel | ||||
|---|---|---|---|---|
| ||||
Use this to select a pre-configured Lync CAC profile. The Lync CAC profile information is sent to the HQ Lync server once each five minutes and after performing an IP layer reroute following a failure (if configured). This field only applies when Monitor type is configured for CAC/IPSEC, and visible only when Gateway is selected from the Monitored Peer Type drop down list. |
Service Status
| Panel | ||||
|---|---|---|---|---|
| ||||
The Service Status field indicates the link status of the Link Monitor to the monitored host. Status entries include: Initializing: Green Down: Red Ready: Blue Active: Green Degraded: Yellow |
Display
| Panel | ||||
|---|---|---|---|---|
| ||||
Click on the Counters option to obtain detailed information of the Host. The Link Monitor Counters screen details the Gateway, Number of Poll Attempts, and Number of Successful Polls. |
Poll Period
| Panel | ||||
|---|---|---|---|---|
| ||||
Specifies the polling interval, in seconds, for testing the link status. The host or the nexthop gateway specified by HostIPAddress is probed once each specified interval. For Default Backup Route configuration, if a faster failover is desired, update the Poll Period, Failed Polls for Down State, and SuccessfulPolls for Up State, as desired. |
...
Overview
Content Tools