Page History

...

1. Access the Ribbon web page, here: https://golearn.rbbn.com/amazon-web-services-sbc-swe-lite.
2. Enter the required information and click Submit. Ribbon will then email you the following two AWS CloudFormation URLs for deploying an SBC SWe Lite to the email address you entered. 
   1. New Resources
   2. Reuse Existing Resources
3. Copy the desired URL from the Ribbon email (template for deploying with new resources or existing resources).
4. Access the AWS Management Console.
5. In the Find Services box, type Cloud Formation.
6. Click Create Stack and select one of the following templates:
   1. With New resources (standard). This creates a new end-to-end installation of a VPC. All resources are created.
      
   2. With Existing resources (import resources). This reuses an existing VPC and reuses all existing subnet resources.
      

      
      

      Caption
      0 Figure 1 Create Stack

      
      

7. Under Specify template, in the Amazon S3 URL field, paste the URL copied from the Ribbon web page (this is the template AWS uses to create the SBC SWe Lite).

   Caption
   0 Figure 1 Specify Template

   
   

8. Click Next.

9. In the Specify stack details screen, configure the fields using the table below for guidance.

   Caption
   0 Figure 1 Specify Stack Details

   
   

   Caption
   0 Table 1 Specify stack details - Field Definitions
   Field Definition Stack name Name for the deployment (i.e., Custom SWe Lite) Instance Type The size of the VM. Available options: t3.small - Max calls 30 c5.large - Max calls 120 c5.xlarge - Max calls 500 VPC ID From the drop down list, select a Virtual Private Cloud (VPC) from the drop down list. NOTE: This field displayed only when using the Existing Resources template. Management Subnet From the drop down list, select a SubnetId of an existing Subnet on the VPC for Admin. NOTE: This field displayed only when using the Existing Resources template. Signaling & Media Interface 1 Subnet From the drop down list, select a SubnetId of an existing subnet on the VPC for Ethernet 1. NOTE: This field displayed only when using the Existing Resources template. Signaling & Media Interface 2 Subnet From the drop down list, select a SubnetID of an existing subnet on the VPC for Ethernet 2. NOTE: This field displayed only when using the Existing Resources template. Management Client Remote IP Address Click on https://whatismyipaddress.com. Access the IP number and enter in this box. For the Public IP address on Admin If you do not set to Yes, you will only be able to manage the SWe Lite from the computer inside your virtual network in the Cloud. Web User Interface Password Password for the SBC SWe Lite WebUI. Confirm Web User Interface Password Confirm password for the SBC SWe Lite WebUI. Host Name Host applied to the SBC SWe Lite. Domain Name Domain used by the SBC Swe Lite (i.e., SBC).

   
   

10. Click Next.
11. In the Configure stack options screen, leave the default configuration for all fields.

12. Click Next. A summary of the stack configuration is listed.

    
    

    Caption
    0 Figure 1 Review SBC SWe Lite Configuration

    
    

13. Review the deployment summary information.

14. Click Create Stack. The events for the VM displays. Click the Refresh icon to view updated events for creating the deploying items for the SBC SWe Lite.
    The process is complete when the status for the SBC SWe Lite you created reads CREATE_COMPLETE.

    The SBC SWe Lite's cloud-init process executes the SBC SWe Lite and sends the initial setup information to the VM, which finalizes the SBC SWe Lite instance.
    
    

    Caption
    0 Figure 1 List of Stacks

    
    

15. In the CloudFormation list, from the stack list, click on the newly create SBC SWe Lite in the output list.
16. From the main menu bar, click on Outputs. There are two IP addresses listed:
    1. SbcSWeLiteIp. IP address used to manage the SBC SWe Lite via WebUI.

    2. TeamsPublicIp. IP address used for Microsoft Teams.

       Info
       Validation checks take place during the deployment process. If the SBC SWe Lite instance fails to create, the Outputs screen displays the reason for the failure in the Description field.

       
       

17. To connect to the SBC SWe Lite's Web UI (used to manage the SWe Lite), paste the SbcSWeLiteIp value (from the Outputs screen) into an internet browser.

18. Upon login, use the credentials you provided during the deployment process. Deployment is complete.
    
    

...