Excerpt Include |
---|
| Best Practices Guide |
---|
| Best Practices Guide |
---|
nopanel | true |
---|
|
This section provides information on installing software on to the following Session Border Controller platforms: SBC 5100™, SBC 5110™, SBC 5200™, SBC 5210™, SBC 5400™ and SBC 7000™.
Pre-Installed Software for the Jumpstart System
The
platforms are pre-installed with the latest version of the following platform software components:
- Operating System
- BMC Firmware—The Baseboard Management Controller (BMC) is a specialized micro-controller embedded in the platforms.
- BIOS Firmware—The Basic Input/Output System.
The
application software package is available as a compressed tar file from the Ribbon Support Portal. Download the application software package to your local computer or server to install the application. Refer to
Downloading Software from the Ribbon Support Portal.
For detailed information on installing the new application software, refer to Installing SBC Application.
Standalone vs. High Availability
The
platform can be configured for one of two different scenarios:
- Standalone—A single SBC server.
- High Availability (HA) / Redundant pair—A redundant SBC pair with one system protecting the other system in case of system failure. The HA configuration consists of two servers configured for box-level redundancy.
SBC Operating Modes
When you initially configure
platform, Only Embedded Routing Engine (ERE) mode is supported for all SBC products from the 6.0.0 release. Refer to
Routing and Policy Management to know more about the supported modes from the 6.0.0 release.
Embedded Routing Engine (ERE)– which is a light version of the PSX Policy Server for small to medium size networks with no complex routing. Select this mode if you are using an external PSX.
Return Merchandise Authorization (RMA) SBC
An ISO (re-imaging) should be performed on every SBC received through the RMA process. Perform ISO with the appropriate OS and application files. To know more about re-installing the OS, refer to: