Excerpt |
---|
Defines the Media System Configuration resource controlling the RTP/RTCP Port Range, Packet Latency settings on the SBC Edge system, NLP control, and MOH service configuration. |
Parameter Name | Required | Service Affecting | Data Type | Default Value | Possible Values | Description |
---|---|---|---|---|---|---|
RTPRTCP_PortStart | Yes | Yes | int | 16384 | Possible values:
| The starting number for the RTP and RTCP port range. |
RTPRTCP_PortCount | Yes | Yes | int | 6002500 | Possible values:
| The number of RTP and RTCP port pairs used by the SBC Edge system. The valid values for SBC1000 and SBC2000 are 1 to 4800 with default value of 600 for the SBC1000 and 1500 for SBC2000. This range for SWe Lite is 1 to 5000 with defaulte value of 2500. For example, if the default values are used for starting port number and number of ports, the last port number would be 1758321383. |
EchoCancel_NLPOption | No | No | Enum | 1 | Possible values:
| This setting controls the Non-Linear Processing (NLP) option for echo cancellation. If NLP is enabled then the options, nlpMild, nlpStandard ("Strong" in the UI), and nlpAggressive represent increasing levels of attenuation. This is applicable only for the SBC 1000/2000 platforms. |
EchoCancel_LECOption | No | No | Enum | 0 | Possible values:
| This setting controls the LEC type, standard or dual filter LEC. Switch between standard LEC and dual filter LEC is not recomemded when there is any active call. This is applicable only for the SBC 1000/2000 platforms. |
MOHSource | No | No | Enum | 0 | Possible values:
| Configures the source of the system's MOH. This is applicable only for the SBC 1000/2000 platforms.
|
FXSPortSelection | No | Yes | string | none | 32 - Max Length | Specifies the string name of the FXS port used for MOH audio in the format of "card:port", E.g. 2:1. This is applicable only for the SBC 1000/2000 platforms. |
SendSTUNPackets | No | No | Enum | 1 | Possible values:
|
Parameter Name | Description | Data Type | Possible Values |
---|---|---|---|
rt_CurrentMohFilename | Read Current MOH file name with extentions of wav, pcm, pcma, and pcmu. | string |