Page History

Add_workflow_for_techpubs

AUTH1	UserResourceIdentifier{userKey=8a00a0c85fd202bb0160132c449a0026, userName='null'}
JIRAIDAUTH	SBX-95908
REV5	UserResourceIdentifier{userKey=8a00a0c85fd202bb0160132c449a0026, userName='null'}
REV6	UserResourceIdentifier{userKey=8a00a0c85fd202bb0160132c449a0026, userName='null'}
REV3	UserResourceIdentifier{userKey=8a00a0c85dcad889015dee5a93e90002, userName='null'}
REV1	UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26ca7d0460, userName='null'}

Panel

In this section:

Table of Contents

maxLevel	4

Use this object to configure Policy-related settings for a specified SIP trunk group.

Info

title	Note

As a best practice, always use UPPERCASE for trunk group names.

Command Syntax

Code Block

language	none

% set addressContext <name> zone <name> sipTrunkGroup <name> policy
	callNotificationCriteriaGroup <group ID>
    callRouting elementRoutingPriority <ERP profile name>
	carrier <serving carrier code>
	country <country code>
	digitParameterHandling 
		egressDmPmRule <rule>
		ingressDmPmRule <rule>
		numberingPlan <numbering plan>
	featureControlProfile <profile name>
	ingress
		flags
			hdPreferredRouting <disable | enable>
  			hdSupportedRouting <disable | enable> 
			nonZeroVideoBandwidthBasedRoutingForH323 <disable | enable>
			nonZeroVideoBandwidthBasedRoutingForSip <disable | enable>
	ipSignalingPeerGroup <name>
	localizationVariant <generic | japan | northAmerica>
	media <packetServiceProfile |  toneAndAnnouncementProfile>
	preferredIdentity <disable | enable>
    services classOfService <COS profile name>
	signaling 
		ipSignalingProfile <profile name>
		signalingProfile <profile name>
	sipDomain <domain name>
	tgIPVersionPreference <both-ipv4-and-ipv6 | ipv4-only | ipv6-only>

Command Parameters

SIP Trunk Group Policy Parameters

Caption

0	Table
1	SIP Trunk Group Policy Parameters

Parameter	Description
`callNotificationCriteriaGroup`	Specifies the name of the call notification criteria group to attach to the trunk group to trigger call notifications. Refer to Servers - Call Notification - CLI for more information on call notification criteria groups. Refer to Sending Unsolicited Call Notifications to Application Servers for more information on the SBC's call notification feature.
`callRouting`	Route a call or request to the next-hop entity. `elementRoutingPriority` – Element Routing Priority Profile name.
`carrier`	The serving carrier code.
`country`	The serving country code.
`digitParameterHandling`	Use this object to specify digit parameter handling for this trunk group for this trunk group. (See the SIP Trunk Group - Policy - CLI#Digit Digit Parameter Handling Parameters table below for details).
`featureControlProfile`	The name of the Feature Control Profile to associate with this trunk group. NOTE: The `featureControlProfile` associated with this `sipTrunkGroup` can be replaced with a different `featureControlProfile`, if desired. However, deleting a `featureControlProfile` from a `sipTrunkGroup` object can cause call failures.
`ingress` `flags`	Use this parameter to configure the following route prioritization flags for this ingress trunk group. (See the SIP Trunk Group - Policy - CLI#Ingress Ingress Flags table below for details)
`ipSignalingPeerGroup`	The name of the IP Signaling Peer Group to associate with this trunk group.
`localizationVariant`	Specifies the parameters and controls used for localization variant for this trunk group. `generic` `japan` `northAmerica`
`media`	Select the profile associated with media policy for this SIP trunk group. `packetServiceProfile` `toneAndAnnouncementProfile`
`preferredIdentity`	This flag is used to populate the originating identity (P-Asserted-Identity, From, Remote-Party-Identity headers) for calls initiated by any of the AoRs in the group. The options are: `enable` `disable (default)` When this flag is enabled, the configured Preferred Identity is used to populate the originating identity of (From, Contact, P-Asserted-Identity, Remote-Party-Identity, Preferred-Identity) headers of the egress INVITE. When this flag is enabled, the configured Preferred Identity is not used to populate any of the originating identity of (From, Contact, P-Asserted-Identity, Remote-Party-Identity, Preferred-Identity) headers of the egress INVITE.
`services`	The service associated with various enhanced services and features for this SIP trunk group. `classOfService <CoS profile name>`
`signaling`	Identifies the parameters controlling the specifics of the SIP signaling for this SIP trunk group. `ipSignalingProfile` – IP Signaling Profile name. `signalingProfile` – Signaling Profile name.
`sipDomain`	The domain string used when SIP signaling requires a configured domain name.
`tgIPVersionPreference`	Use this flag to choose the IP address preference on the ingress Trunk Group. `both-ipv4-and-ipv6` (default) `ipv4-only` `ipv6-only`

Digit Parameter Handling Parameters

Caption

0	Table
1	Digit Parameter Handling Parameters
3	Digit Parameter Handling Parameters

Parameter Description

egressDmPmRule

The name of Digit Manipulation and Parameter Manipulation profile applied at the egress.

PAI_AND_FROM_HEADER
PAI_DISPLAY_NAMES_1_NTL
PAI_SIP_DSPNAME_CLG_NAM
PAI_TEL_DSPNAME_GN_CPN
PRFX_TO_HEADER_CDPN_NTL
PRFX_TO_HEADER_GDPN_NTL
PRFX_TO_HEADER_OCN_NTL
SIP_ADD_PLUS
SIP_REMOVE_CLG81
SIP_REMOVE_PLUS1
SIP_REMOVE_PLUS39
SIP_REMOVE_PLUS44
SIP_REMOVE_PLUS49
SIP_REMOVE_PLUS52
SIP_REMOVE_PLUS81
SIP_REMOVE_PLUS86
SIP_REMOVE_PLUS91

ingressDmPmRule

The name of Digit Manipulation and Parameter Manipulation profile applied at the ingress.

PAI_AND_FROM_HEADER
PAI_DISPLAY_NAMES_1_NTL
PAI_SIP_DSPNAME_CLG_NAM
PAI_TEL_DSPNAME_GN_CPN
PRFX_TO_HEADER_CDPN_NTL
PRFX_TO_HEADER_GDPN_NTL
PRFX_TO_HEADER_OCN_NTL
SIP_ADD_PLUS
SIP_REMOVE_CLG81
SIP_REMOVE_PLUS1
SIP_REMOVE_PLUS39
SIP_REMOVE_PLUS44
SIP_REMOVE_PLUS49
SIP_REMOVE_PLUS52
SIP_REMOVE_PLUS81
SIP_REMOVE_PLUS86
SIP_REMOVE_PLUS91

numberingPlan

The name of the Numbering Plan profile.

CHINA_NUM_PLAN
GENERIC_NUM_PLAN
GERMANY_NUM_PLAN
INDIA_NUM_PLAN
ITALY_NUM_PLAN
JAPAN_NUM_PLAN
MEXICO_NUM_PLAN
NANP_ACCESS
UK_NUM_PLAN

Ingress Flags

Caption

0	Table
1	Ingress Flags
3	Ingress Flags

Parameter	Description
`hdPreferredRouting`	Enable flag on ingress trunk group to use PSX HD Preferred Routing strategy. `disable` (default) `enable` NOTE: When this flag is enabled, the "nonZeroVideoBandwidthBasedRouting..." flags are disabled. Do not use this flag on Egress trunk groups.
`hdSupportedRouting`	Enable flag on ingress trunk group to use PSX HD Supported Routing strategy. `disable` (default) `enable` NOTE: When this flag is enabled, the "nonZeroVideoBandwidthBasedRouting..." flags are disabled. Do not use this flag on Egress trunk groups.
`nonZeroVideoBandwidthBasedRoutingForH323`	Enable this flag on ingress trunk group to give priority to routes with non-zero video bandwidth in H.323 video calls. `disable` (default) `enable`
`nonZeroVideoBandwidthBasedRoutingForSip`	Enable this flag on ingress trunk group to give priority to routes with non-zero video bandwidth in SIP video calls. `disable` `enable` (default) INFO: See Refer to PSX Manager documentation for details of these features.

Pagebreak

Space shortcuts

Page tree

Versions Compared

Old Version 1

New Version Current

Key

Command Syntax

Command Parameters

SIP Trunk Group Policy Parameters

Digit Parameter Handling Parameters

Ingress Flags