Versions Compared

Old Version 1

changes.mady.by.user Ribbon Communications

Saved on

compared with

New Version 2

changes.mady.by.user Ribbon Communications

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

CSS Stylesheet
img.confluence-embedded-image { display: inline-block !important; }


Add_workflow_for_techpubs
AUTH1UserResourceIdentifier{userKey=8a00a0c85b2726c2015b58aa779d0003, userName='null'}
JIRAIDAUTH
SYM
CHOR-
24006
2036
REV5UserResourceIdentifier{userKey=8a00a0c85b2726c2015b58aa779d0003, userName='null'}
REV6UserResourceIdentifier{userKey=8a00a0c85b2726c2015b58aa779d0003, userName='null'}
REV3UserResourceIdentifier{userKey=8a00a0c86a61778d016a7d0876df0017, userName='null'}
REV4UserResourceIdentifier{userKey=
8a00a02355cd1c2f0155cd26cef30cd0
8a00a0c856ed5c6701572cb23680000b, userName='null'}
REV1UserResourceIdentifier{userKey=
8a00a02355cd1c2f0155cd26cc2d0797
8a00a02355cd1c2f0155cd26cef20cbf, userName='null'}

Overview - What is a SIP Server Table?

There are two types of SIP Server Tables offered:

SIP Server

SIP Server Tables contain information about the SIP devices connected to the

Spacevars
0product
. The entries in the tables provide information about the IP Addresses, ports, and protocols used to communicate with each server. The Table Entries also contain links to counters that are useful for troubleshooting. Refer to Creating and Modifying Entries in SIP Server Tables for configuration. The SIP Server supports either an FQDN or IP Address (V4 or V6).

SIP Recorder

A SIP Server Table acting as SIP Recorder contains information about the SIP devices connected to the 

Spacevars
0product
for SIP Recording (SIPREC). To support SIPREC, the 
Spacevars
0product
acts as a Session Recording Client (SRC) initiating a Recording Session (RS) towards a Session Recording Server (SRS). The
Spacevars
0product
initiates a recording session for all the Communication Sessions (CS) to be recorded. The CS output is based on the 
Spacevars
0product
's WebUI configuration for enabling recording. The SIP Server (SIP Recorder) supports either an FQDN or IP Address (V4 or V6). Each SIPREC Server entry allows multiple servers to be configured. When the standby SRS is configured, the 
Spacevars
0product
sends the recording to the active SRS first. If the request fails (due to transport failure), the SBC SWe Lite sends the recording session to the standby SRC.

Refer to Creating and Modifying Entries in SIP Server Tables for configuration.

...

Failover to another SIP server will also occur if the SBC receives the following SIP response code from an active SIP server for calls: 4xx, 5xx, or 6xx.

 


Note

When Load Balancing is configured as Priority: Register Active Only in the SIP Signaling Group, a SIP Failover Cause Code should be selected under Mapping Tables in the SIP Signaling Group. If a SIP Failover Cause Code is selected, Failover occurs for timeout cases and failure response codes.  If a SIP Failover Cause Code is not selected, Failover occurs only for timeout cases and not for failure response codes. 

...

  1. In the WebUI, click the Settings tab.

  2. In the left navigation pane, go to SIP > SIP Server Tables.

    Panel
    borderStylenone


    Caption
    0Figure
    1SIP Server Tables

    Image Modified

     




To view a SIP Server Table's properties:

...

To add a SIP Server Table:

  1. In the left navigation pane, go to SIP > SIP Server Tables.
  2. Click the Create ( Image Removed Image Added) icon.
  3. In the Description field, enter a descriptive name for the SIP Server Table.

  4. From the Type drop down box, select SIP Server or SIP Recorder.

  5. Click OK.

    PanelborderStylenone

    Caption
    0Figure
    1Create SIP Server Table

    Image Added


  6. Click OK.
  7. In the left navigation pane, go to SIP > SIP Server Tables. Click on the desired SIP Server Table

    Image Removed

    just created.

  8. From the Create SIP Server drop down list, select IP/FQDN or DNS-SRV. The associated configuration screen is displayed.

    Info

    For a SIP Recorder, DNS-SRV is unavailable.


  9. Configure the options:

    1. For a SIP Server: Refer to Creating and Modifying Entries in SIP Server Tables.

    2. For a SIP Recorder: Refer to Creating and Modifying Entries in the SIP Recorder Table

    Enter a descriptive name in the Description text field

    1. .

  10. Click OK.


h5
Include Page
_Delete_Entry_Procedure
_Delete_Entry_Procedure
nopaneltrue
Children Display
depth3
style
 

Pagebreak