Page History

Use this window to work with SIP-to-CPC cause mapping profiles on the node. These profiles can be assigned to SIP trunk groups and map SIP status codes to internal CPC (Call Processing Component) cause codes.The SBC provides four mapping profiles by default that you can assign to trunk groups. The default profiles cannot be modified or deleted. However, you can create custom mapping profiles which you can assign to trunk groups.

To View SIP To CPC Cause Map Profiles

On the SBC main screen, go to Configuration > Profile Management > Category: Signaling Profiles >SIP Cause Code Mapping > SIP To CPC Cause Map Profile.
All > Profiles > Signaling > SIP Cause Code Mapping > SIP To CPC Cause Map Profile

The SIP To CPC Cause Map Profile window opens.

To Create a SIP To CPC Cause Map Profile

To create a new SIP To CPC cause map profile:

1. Click New SIP To CPC Cause Map Profile. The Create New SIP To CPC Cause Map Profile window opens. 

   Caption
   0 Figure 1 Create New SIP To CPC Cause Map Profile Window

   
   

2. Use the following table to enter general parameters for the profile and click Save.

To Edit a SIP To CPC Cause Map Profile

The default profiles cannot be edited. To edit a SIP To CPC cause map profile you added:

1. Click the radio button next to the name of the profile you want to edit. The Edit Selected SIP To CPC Cause Map Profile window opens.
2. Make the required changes and click Save.

To Delete a SIP To CPC Cause Map Profile

The default profiles cannot be deleted. To delete any of the SIP To CPC cause map profiles you added:

1. Click the radio button next to the specific SIP To CPC cause map profile you want to delete.
2. Click the X at the end of the row to delete.
3. Confirm the deletion when prompted.