Page History

In this section:

SWe Lite supports the following (depending on your license):

• For Memory (RAM), valid settings are 1 GiB (1024 MiB), 1.5 GiB (1536 MiB), or 2.5 GiB (2560 MiB).
• For vCPUs, valid settings are 1, 2, 4 or 10 vCPUs.

For detailed information, refer to SBC SWe Lite Hardware and Software Requirements.

For adding vCPUs or increasing memory on a SWe Lite upgraded to Release 7.0, refer to Adding Changing vCPU and Increasing Memory/VM Size.

Limitations

• Disk and network drivers must be selected during deployment only.

• Changing disk or network drivers post-deployment is not recommended.

Create

new Virtual Machine

1. Start the Virtual Machine Manager. 
   

   Caption
   0 Figure 1 Start Virtual Machine Manager 3 Start Virtual Machine
   Image Modified

   
   

2. Select New Virtual Machine from the File drop-down menu.

   Caption
   0 Figure 1 New Virtual Machine 3 New Virtual Machine
   Image Modified

   
   

3. From the Create New Virtual Machine dialog, select Import existing disk image and click Forward.

   Caption
   0 Figure 1 Create

1. new Virtual Machine 3 Create New Virtual Machine

   Image Modified

   
   

2. Select Linux from the OS type drop-down menu.
   

3. Select Debian Squeeze from the Version drop-down menu  .

4. Click Browse and navigate to the location of the disk image. 

5. From the Choose Storage Volume dialog, select file SBCSWeLite-

1. disk.qcow2, then click Choose Volume.

2. Click Forward.

   Caption
   0 Figure 1 OS Type and Version 3 OS Type and Version
   Image Modified

   
   

3. Set Memory (RAM) field to 1024, 1536, or 2560.

4. Set CPUs to 1, 2, 4, or 10 and click Forward.

1. Caption
   0 Figure 1 Memory and CPU Settings 3 Memory and CPU Settings
   Image Modified

   
   

2. Enter the name of your new VM in the Name field.
3. Select the Customize configuration before install option.

4. From the New VM dialog, select the applicable network from the Network selection drop-down menu, and click Finish.

1. Info

1. title Note

   This network is used for Management Interface.

   
   

   Caption
   0 Figure 1 Finalizing Create

1. new Virtual Machine 3 Finalizing Create New Virtual Machine

   Image Modified

   
   

Customize Configuration

Modify the Disk Device Model

1. In the new pop-up window, select Disk 1.

2. Expand Advanced options and select VirtIO (for

1. Releases 7.0 and above) or IDE (for Release 6.1) from the Disk bus drop-down menu.

1. Caption
   0 Figure 1 Adding Hardware 3 Adding Hardware
   Image Modified

Modify Network Interface Device Model

1. Select NIC.

2. Select virtio from the Device model drop-down menu, then click Apply. 
   

   Caption
   0 Figure 1 Modify Virtual Network Interface 3 Modify Virtual Network Interface
   Image Modified

   
   

Add Virtual Network Interfaces

1. Click Add Hardware.
2. From the Add New Virtual Hardware dialog, select Network.
3. Select the desired Bridge id from the Network source drop-down menu.
4. Select virtio from the Device model drop-down menu, and then click Finish.

5. Repeat the preceding steps

1. for additional Network Interfaces.

   Caption
   0 Figure 1 Adding Network Interfaces 3 Adding Network Interfaces
   Image Modified

Configure CPU Model

To achieve the maximum performance of the CPUs, configure the CPUs so that the Model field is set to host-passthrough.

Configure SR IOV

The Single Root I/O Virtualization (SR-IOV) is a type of PCI device that enables a physical device (such as a single NIC device) to share to multiple virtual functions; this functionality improves the performance of the I/O. SR-IOV configuration in KVM can share the physical port with multiple virtual machines.

For the configuration steps required to enable SR-IOV networks on the KVM platform, refer to Red Hat Enterprise's PCI Device Assignment with SR-IOV Devices.

Finalize Installation

1. From the Virtual Machine dialog, click Begin installation.

   Caption
   0 Figure 1 Begin Final Installation 3 Begin Final Installation
   Image Modified

1. 
   

   Info

1. title Note

   The configured VM starts automatically as shown below.

   
   

   Caption
   0 Figure 1 SBC SWe Lite Running 3 SBC SWe Lite Running
   Image Modified

   
   

2. Click the monitor icon in the header to open the VM console. 
   

   Caption
   0 Figure 1 Open VM Console 3 Open VM Console
   Image Modified