This object configures Use the IKE Protection Profile by establishing the window to configure IKE Protection Profiles by establishing an encryption algorithm, the maximum SA lifetime, and other SA conditions, for the an IKE peer. These properties are linked to each IKE peer that is provisioned with this profile.
To View
Ike IKE Protection
ProfileProfiles
On the SBC main screen, go to Configuration > Profile Management > Category: Security Profiles > Ike IKE Protection Profile.
The Ike IKE Protection Profile window is displayed.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | Profile Management - Security Profiles - Ike Protection Profile |
|---|
|
 Image Removed
|
To Edit Ike Protection Profile
To edit any of the Ike Protection Profile in the list, click the radio button next to the specific Ike Protection Profile name.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | Profile Management - Security Profiles - Ike Protection Profile Highlighted |
|---|
|
Image Removed |
The Edit Selected Ike Protection Profile window is displayed below.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | Profile Management - Security Profiles - Ike Protection Profile Edit Window |
|---|
|
Image Removed |
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.
| IKE Protection Profile Window |
|
Image Added |
To Create an IKE
To Create Ike Protection Profile
To create a new Ike IKE Protection Profile, click New Ike Protection Profile tab on the Ike Protection Profile List panel.
| Caption |
|---|
0 | Figure| 1 | Profile Management - Security Profiles - Ike Protection Profile Fields |
|---|
Image Removed |
The Create New Ike New IKE Protection Profile window is displayedopens.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | Profile Management - Security Profiles - Ike Create New IKE Protection Profile Create Window |
|---|
|
|
The following fields are displayed:
| Caption |
|---|
| 0 | Table |
|---|
| 1 | IKE Protection Profile Parameters |
|---|
|
Parameter | Description |
|---|
Name | The name of the IKE Protection Profile. | SA Lifetime
Time | The SA Lifetime setting, in seconds. This is the maximum interval that any one Security Association will be maintained before possible re-keying. Must be 1200-
1,000,000, default is 28,800 (seconds).This parameter applies to the IKE SA when it appears in the IKE Protection Profile and to the IPsec SA when it appears in the IPsec Protection Profile. The default value corresponds to 8 hours | DPD Interval | Specifies the IKE Protection Profile Dead Peer Detection test interval period in seconds. The value '0' corresponds to DPD disabled. | | Pfs Required | Enable flag to require PFS use during IPSec SA negotiation. disabled Disabled (default)enabledEnabled
|
|
To
Copy Ike Edit IKE Protection
ProfileProfiles
To copy any of the created Ike Protection Profile and to make any minor changes, click edit an IKE Protection Profile:
- Click the radio button next to the
specific Ike Protection Profile to highlight the row.| Caption |
|---|
| 0 | Figure |
|---|
| 1 | Profile Management - Security Profiles - Ike Protection Profile Highlighted |
|---|
|
Image Removed |
Click Copy Ike Protection Profile tab on the Ike Protection Profile List panel.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | Profile Management - Security Profiles - Ike Protection Profile Fields |
|---|
|
Image Removed |
The Copy Selected Ike Protection Profile window is displayed along with the field details which can be edited.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | Profile Management - Security Profiles - Ike Protection Profile Copy Window |
|---|
|
Image Removed |
Make the required changes to the required - specific IKE Protection Profile name. The Edit Selected Ike Protection Profile window opens.
- Make any required changes and click Save at the right hand bottom of the panel to save the changes made.
To Copy an IKE Protection Profile
To copy an IKE Protection Profile:
- Click the radio button next to IKE Protection Profile you want to copy.
- Click Copy IKE Protection Profile. The Copy Selected IKE Protection Profile window opens.
- Make any required changes to the fields and click Save to save the changes.
The copied Ike Protection Profile is displayed at the bottom of the original Ike Protection Profile in the Ike Protection Profile List panel.-
To Delete
Ike an IKE Protection Profile
To delete any of the created Ike an IKE Protection Profile, click :
- Click the radio button next to the
specific Ike - IKE Protection Profile
which - you want to delete.
- Click the Delete icon (X)
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | Profile Management - Security Profiles - Ike Protection Profile Highlighted |
|---|
|
Image Removed |
Click Delete - at the end of the
highlighted - row.
A delete confirmation message appears seeking your decision.-
- Confirm the deletion when prompted
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | Profile Management - Security Profiles - Ike Protection Profile Delete Confirmation |
|---|
|
Image Removed |
Click Yes to remove the specific Ike Protection Profile from the list- .