Page History
Use this object to remove an entry (by it's IP address) from Use the Remove Enhanced DBL Entry window to remove specific entries from the list of Enhanced DBL entries based on source IP address.
To Remove an Enhanced DBL Entry
- On the SBC main screen, navigate to All > Address Context > Enhanced DBL >
- Remove Enhanced DBL Entry
- .
Select the
address context from the
| Caption | ||||
|---|---|---|---|---|
| ||||
Remove IP Entry command from the dropdown listBy default, the only available command is Address Context list. The Commands list appears as shown below.
Caption 0 Figure 1 Commands - dropdown list
| title | Note |
|---|
Select Remove IP Entry
The removeIpEntry pop-up window is displayedThe parameters and their descriptions are given in the table below:
from the Commands list and click Select. The removeIP Entry window opens.
Caption 0 Figure 1 Remove IP Entry window
Use the following table to edit the fields and then click removeIpEntry.
Caption 0 Table 1 Remove IP Entry
Parameters Parameter Description Source IP Address The source IP address ( IPv4/IPv6) of the the enhanced DBL entry.Source Port The port (
0-65535) used by the source IP address. The default value is 0.Note: A value of "0" means no port is used.
Transport The transport protocol used. The following options are available in the drop-down list:
- None (default)
- SCTP
- TCP
- Tls-
- tcp
- UDP
Make necessary changes and click the removeIpEntry button. On saving the changes successfully, a confirmation message is displayed.
| Caption | ||||
|---|---|---|---|---|
| ||||
Click OK to complete the removal process.
- Confirm the removal when prompted.
| Pagebreak |
|---|
Overview
Content Tools