Page History

...

In traditional real-time communication, voice sessions have a one-to-one relationship between signaling and media (S1:M1), either with or without transcoding. An  A traditional, integrated signaling and media network element (integrated SBC, or I-SBC) scales horizontally and often runs on a custom hardware to provide the effectively meets the requirements of this type of session. I-SBCs often run on custom hardware and are scaled horizontally to provide a deployment its required scaling and capacity. The SBC hardware series is designed to process and transcode more calls, utilizing all the available media resources. But as  

As services evolve to support multimedia sessions, the change in traffic turns out to be traffic becomes more dynamic. As the traditional communication has one session for every media (S1:M1) relation with or without transcoding; the The next generation communication has may have one session with no media (S1:M0), or one session with multiple media (S1:Mn) relation relationships, with or without transcoding. Due to this dynamic relationnature, effective handling of the next generation communication service requires considering the following three planes independently:

• Signaling plane: for more IM presence status

• Media plane: for video, MSRP, multiple streams per session

• Transcoding plane: for transcoding / transrating / transizing of audio or video

Spacevars
0 company

 Distributed SBC Solution

The D-SBC architecture supported by SBC SWe breaks the main SBC functions into separate services and assigns them to separate clusters. A cluster consists of multiple discrete nodes supporting one main function, such as signaling or media, with all nodes providing the same service. A virtual environment supports multiple clusters simultaneously, each providing a specific SBC function:

• The S-SBC cluster terminates signaling and provides only DoS protection for signaling traffic.
• The M-SBC cluster acts as a policer or rate limiter for media traffic.
• The T-SBC cluster provides media inter-working or transcoding.

These clusters coordinate with each other and are linked by the S-SBC using the 

SBC Redundancy Groups

An SBC redundancy group (RG) consists of one or more SBC SWe node instances. All the instances in an RG must have homogeneous resource allocation, configuration and personality.  All RGs in a cluster must be of the same SBC type (signaling SBC or media SBC), which dictates the cluster type such as a signaling cluster or a media cluster.

Why Distribute the SBC?

The implementation of distributed functions in the network infrastructure D-SBC architecture provides SBC applications the ability to distribute more functionalities functions throughout the network and to utilize networks network resources effectively.

The advantages of decomposing include:

• Flexibility to Scale: In an I-SBC all the components use the same hardware to service incoming calls on the SBC instance. But, in a Distributed distributed SBC (D-SBC) each component scales independently within its cluster depending on the call and traffic requirements.

Example: Signaling components can be scaled if the traffic requires high signaling such as presence without the media component. Similarly, traffic with high media requirements, like video calls, requires instantiating more instances in the media cluster. Traffic that needs high transcoding requires instantiating more instances in the transcoding cluster.

• Service Chaining: The SBC includes functions such as call control, routing and policy, signaling normalization, IP firewall and policy, and media transcoding (or trans-rating). Each component of the D-SBC logically provides one or more such functions instantiated in a cluster to support scaling based on the traffic requirement. The signaling component of the SBC chains one or more such functions per call without knowing the media cluster details.
• Investment protection: Reusing existing custom hardware for media interworking saves cost. The custom Custom hardware coexists can coexist with the media components providing media inter-working services. Also, when required it is invoked as an external media server.
• High Resilience with Low Media Latency: Geographically separated media components are deployed closer clusters can be deployed closer to the network in a cluster resulting edge of the network. This results in switching media at the network's edge rather than backhauling from the core, and reducing edge instead of backhauling to the core which reduces media latency and backhauling backhaul costs with increased quality of experience. Also,  The use of multiple media instances provide resilience by selecting media components from different site.

Spacevars
0 company

 Distributed SBC Solution

The D-SBC architecture breaks all the services into separate functions known as clusters. A cluster is a single application consisting of multiple discrete compute elements such as VMs. A cluster includes one application, such as S-SBC or M-SBC, with multiple nodes providing a specific service. A virtual environment supports multiple clusters simultaneously, each providing a specific service:

• The S-SBC cluster terminates signaling and provides only DoS protection for signaling traffic.
• The M-SBC cluster acts as a policer or rate limiter for media traffic.
• The T-SBC cluster provides media inter-working or transcoding.

These clusters coordinate with each other and are linked by the S-SBC using the 

N:1 Redundancy Architecture

The D-SBC supports an N:1 mechanism where one standby instance acts as the back up for "N" active SBC instances. In a fail-over scenario, the standby instance takes over and becomes active and the failed active instance becomes standby, once it is up and running.

SBC Redundancy Groups

...

• provides resiliency enabling selection of media service components from different sites.