Page History
| Add_workflow_for_techpubs | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
| Panel | |
|---|---|
In this Section:
|
...
Overview
The Call Detail Status displays the ingress and egress characteristics of the call.
- Circuit-to-Circuit calls display DSP information such as echo canceller settings, signal energy levels, and audio type values on both sides of the call.
- Circuit-to-Packet calls display the DSP information for the circuit side of the call and the packet side parameters such as the configured audio
...
- codec from the Packet Service Profile, the actual audio
...
- codec currently in use for the call, and other IP parameters, including information on IP Loopback for IXP IP looped legs. The actual
...
- codec may differ from the configured
...
- codec if the
software detects FAX or modems and thus switches from a compressionSpacevars 0 product
...
- codec to G.711 or T.38.
...
- Packet-to-packet calls
...
- contains a set of RTP statistics for both their ingress and egress legs.
...
| Spacevars | ||
|---|---|---|
|
...
Viewing Call Detail Status
- Log on to the EMA Configurator as admin.
- Click All tab.
On the navigation pane, click Global > CAC > Call Detail Status. The Call Detail Status window is displayed.
Caption 0 Figure 1 Call Detail Status
...
For the descriptions of these parameters, refer to Show Table Global CLI page and search for "Call Detail Status Statistics".
By default only ten entries are displayed in a view. You can choose the number of entries to be displayed under the Show entries drop down box. Click to expand the window to display more fields.
Info title Note
...
When the call volumes are high, EMA takes approximately 30 seconds to display the output.
Parameter Description
- For parameter descriptions, refer to Call Detail Status section in Show Table Global page.
| Pagebreak |
|---|
Overview
Content Tools