Page History

Noprint

Panel

borderColor	green
bgColor	transparent
borderWidth	2

Back to Table of Contents

Back to CLI Configure Mode

Back to Address Context - CLI

Back to Zone - CLI

Back to zone sipTrunkGroup - CLI

...

Note
As a best practice, always use UPPERCASE for trunk group names.

Include Page

	Param_values_exception
	Param_values_exception

Command Syntax

Code Block

language	none

% set addressContext <name> zone <name> sipTrunkGroup <name> cac
	bandwidthLimit <0-2147483647>
	bandwidthLimitThreshold <0-100>
    bandwidthVideoThreshold <0-100>
	callLimit <0-2147483647>
	callLimitThreshold <0-100>
	egress 
		callBurstMax <1-900> (SBC 7000 range is 1-2700)
		callLimit <0-2147483647>
		callRateMax <1-450> (SBC 7000 range is 1-1350)
		emergencyOversubscription <0-1000>
		extendedEmergencyIpLimit <0-40000>
		otherReqBurstMax <1-1000> (SBC 7000 range is 1-3000)
		otherReqRateMax <1-1000> (SBC 7000 range is 1-3000)
		registerBurstMax <1-1000> (SBC 7000 range is 1-3000)
		registerRateMax <1-1000> (SBC 7000 range is 1-3000)
		subscribeBurstMax <1-1000> (SBC 7000 range is 1-3000)
		subscribeRateMax <1-1000> (SBC 7000 range is 1-3000)
	emergencyOversubscription <0-1000>
	estimatedChildRegistrations <1-256>
	extendedEmergencyIpLimit <0-40000>
	ingress 
		callBurstMax <1-900> (SBC 7000 range is 1-2700)
		callLimit <0-2147483647>
		callRateMax <1-450> (SBC 7000 range is 1-1350)
		emergencyOversubscription <0-1000>
		extendedEmergencyIpLimit <0-40000>
		otherReqBurstMax <1-1000> (SBC 7000 range is 1-3000)
		otherReqRateMax <1-1000> (SBC 7000 range is 1-3000)
		registerBurstMax <1-1000> (SBC 7000 range is 1-3000)
		registerRateMax <1-1000> (SBC 7000 range is 1-3000)
		subscribeBurstMax <1-1000> (SBC 7000 range is 1-3000)
		subscribeRateMax <1-1000> (SBC 7000 range is 1-3000)
	registeredEndpointCacProfile <profile name>
	registrationLimit <0-2147483647>
	subscriptionLimit <0-2147483647>
	tcpMediaLimit <0-5000>

Command Parameters

Caption

0	Table
1	SIP Trunk Group CAC Parameters

Parameter Length/Range Description

bandwidthLimit 0-2147483647, or unlimited The total media bandwidth limit, in Kbits/sec. (default = "unlimited")

bandwidthLimitThreshold 0-100 Enter threshold value (as a percentage) to specify bandwidth utilization notification threshold. (range: 0-100 / default = 0)

bandwidthVideoThreshold 0-100 Enter threshold value (as a percentage of video bandwidth) to limit video streams to a specific bandwidth to prevent video calls consuming call bandwidth otherwise needed for audio calls. (range: 0-100 / default = 0)

callLimit 0-2147483647, or unlimited Total number of concurrent calls (either ingress or egress) allowed. (default = “unlimited”).

callLimitThreshold 0-100 Call Limit utilization notification threshold, as a percentage. (default = 0)

egress

N/A

Egress-specific call admission control configuration for the SIP trunk group.

callBurstMax – (Default is 'unlimited') Maximum allowed burst size (above the allowed sustained rate) for egress call attempts, in calls per second. (range: 1-900, or unlimited. SBC 7000 range is 1-2700, or unlimited).
callLimit – (Default is 'unlimited') Total number of concurrent calls (either ingress or egress) allowed on egress. (range: 0-2147483647, or unlimited).
callRateMax – (Default is 'unlimited') Maximum sustained egress call rate allowed in calls per second. (range: 1-450, or unlimited. SBC 7000 range is 1-1350, or unlimited).
Note
You can set both “callBurstMax” and “CallRateMax” as unlimited; however, if you assign a value to one parameter, the other must also be assigned a value.
emergencyOversubscription – (Default = 10) Oversubscription of resources (as a percentage) that is allowed for emergency calls. (range: 0-1000).
otherReqBurstMax – (Default is 'unlimited') Maximum allowed burst (above the allowed sustained rate) for any other egress out-of-dialog SIP request. (range: 1-1000, or unlimited. SBC 7000 range is 1-3000, or unlimited)
otherReqRateMax – (Default is 'unlimited') Maximum sustained egress rate (requests per second) of other out-of-dialog SIP requests. (range: 1-1000, or unlimited. SBC 7000 range is 1-3000, or unlimited)
registerBurstMax – (Default is 'unlimited') Maximum allowed burst (above the allowed sustained rate) for egress initial SIP registrations. (range: 1-1000, or unlimited. SBC 7000 range is 1-3000, or unlimited)
registerRateMax – (Default is 'unlimited') Maximum sustained egress rate (registrations per second) of initial SIP registrations allowed. (range: 1-1000, or unlimited. SBC 7000 range is 1-3000, or unlimited)
Note
You can set both “registerBurstMax” and “registerRateMax” as unlimited; however, if you assign a value to one parameter, the other must also be assigned a value.
subscribeBurstMax – (Default is 'unlimited') Maximum allowed burst (above the allowed sustained rate) for egress initial SIP subscribe request. (range: 1-1000, or unlimited. SBC 7000 range is 1-3000, or unlimited)
subscribeRateMax – (Default is 'unlimited') Maximum sustained egress rate (subscribes per second) of initial SIP subscribe request. (range: 1-1000, or unlimited. SBC 7000 range is 1-3000, or unlimited)

emergencyOversubscription

0-1000

(Default = 10) The percentage of resource oversubscription allowed for emergency calls.

estimatedChildRegistrations 1-256 (Default = 1) Estimated number of child registrations (i.e. the estimated number of P-Associated-URIs in 200 OK message).

extendedEmergencyIpLimit

0-40000

(Default = 0) The resource oversubscription (expressed as numeric value) allowed for emergency calls.

ingress

N/A

Ingress-specific call admission control configuration for the SIP trunk group.

callBurstMax – (Default is 'unlimited') Maximum allowed burst (above the allowed sustained rate) for ingress calls in calls per second (range: 1-900, or unlimited. SBC 7000 range is 1-2700, or unlimited).
callLimit – (Default is 'unlimited') Total number of concurrent calls allowed on ingress. (range: 0-2147483647, or unlimited).
callRateMax – (Default is 'unlimited') Maximum sustained ingress call rate allowed in calls/second. (range: 1-450, or unlimited. SBC 7000 range is 1-1350, or unlimited).
Note
You can set both “callBurstMax” and “CallRateMax” as unlimited; however, if you assign a value to one parameter, the other must also be assigned a value.
emergencyOversubscription – (Default = 10) Oversubscription of resources (as a percentage) that is allowed for emergency calls. (range: 0-1000).

otherReqBurstMax – (Default is 'unlimited') Maximum allowed burst (above the allowed sustained rate) for any other ingress out-of-dialog SIP request. (range: 1-1000, or unlimited. SBC 7000 range is 1-3000, or unlimited)
otherReqRateMax – (Default is 'unlimited') Maximum sustained ingress rate (requests per second) of other out-of-dialog SIP requests. (range: 1-1000, or unlimited. SBC 7000 range is 1-3000, or unlimited)
registerBurstMax – (Default is 'unlimited') Maximum allowed burst (above the allowed sustained rate) for initial SIP registrations. (range: 1-1000, or unlimited. SBC 7000 range is 1-3000, or unlimited)
registerRateMax – (Default is 'unlimited') Maximum sustained rate of initial SIP registrations allowed in registrations per second. (range: 1-1000, or unlimited. SBC 7000 range is 1-3000, or unlimited)
Note
You can set both “registerBurstMax” and “registerRateMax” as unlimited; however, if you assign a value to one parameter, the other must also be assigned a value.
subscribeBurstMax – (Default is 'unlimited') Maximum allowed burst (above the allowed sustained rate) for ingress initial SIP subscribe request. (range: 1-1000, or unlimited. SBC 7000 range is 1-3000, or unlimited)
subscribeRateMax – (Default is 'unlimited') Maximum sustained ingress rate (subscribes per second) of initial SIP subscribe request. (range: 1-1000, or unlimited. SBC 7000 range is 1-3000, or unlimited)

registeredEndpointCacProfile N/A Endpoint CAC profile containing CAC parameters that are applied individually to each registrant.

registrationLimit 0-2147483647, or unlimited (Default is 'unlimited') The total number of concurrent SIP registrations allowed.

subscriptionLimit 0-2147483647, or unlimited (Default is 'unlimited') The total number of concurrent SIP subscriptions allowed on IP trunk group.

tcpMediaLimit 0-5000, or unlimited MRM session limit per trunk group.

Pagebreak

Space shortcuts

Page tree

Versions Compared

Old Version 2

New Version 3

Key

Command Syntax

Command Parameters