Page History

Use the Anat window to set Alternative Network Address Types (ANAT) options when for a specific SIP trunk group whose the media address type is set to IPv4 and IPv6.

To View and Edit ANAT Parameters

On the SBC main screen, navigate to All > Address Context > Zone > SIP Trunk Group > Media > Anat. The Anat window is displayed. or
Configuration > System Provisioning > Category: Trunk Provisioning > Trunk Group > SIP Trunk Group > SIP Trunk Advanced > SIP Trunk - Media - Advanced > Media > Anat

Use the drop-down boxes to select the desired specific Address Context, Zone, and SIP Trunk Group you want to configure.

The Edit Anat window is displayedopens.

Caption

0	Figure
1	SIP Trunk Advanced Group - SIP Trunk Media Advanced Early Media - Anat Window

The following fields are displayed:Use the following table to change the values as needed and then click Save.

Caption

0	Table
1	Media - Anat Parameters

Parameter

Description

Offer Preference

Offer version precedence when the SDP method is ANAT. The options are:

Match Sig Addr Type (default) – Select this option to match the address type (IPv4 or IPv6) used for signaling.
IPv4
IPv6

Note: This flag is visible only when IPv4 and IPv6 is chosen as the values for the option, Media Addr Type under Media.

Answer Preference

Answer version precedence when the SDP method is ANAT. The options are:

Match Sig Addr Type (default) – Select this option to match the address type (IPv4 or IPv6) used for signaling.
IPv4
IPv6
Honor Recv Prec - Select this option to choose the first received IP version in the SDP answer within ANAT address format.

Note: This flag is visible only when IPv4 and IPv6 is chosen as the values for the option, Media Addr Type under Media.

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.

Pagebreak

Space shortcuts

Page tree

Versions Compared

Old Version 4

New Version Current

Key

To View and Edit ANAT Parameters