| Add_workflow_for_techpubs |
|---|
| AUTH1 | samenon |
|---|
| REV5 | ghoppe |
|---|
| REV6 | ghoppe |
|---|
| REV3 | akempanarasimhaiah |
|---|
| REV1 | aprakash |
|---|
|
...
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | Signaling Ports - Gw Sig Port |
|---|
|
 Image Modified
|
The Gw Sig Port can be checked for each Address Context or for each Zone or for all the Address Contexts and Zones created. Use the drop-down box to select the desired Address Context and Zone.
...
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | Gw Sig Port Highlighted |
|---|
|
Image Modified |
The Edit Selected Gw Sig Port window is displayed below.
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | Gw Sig Port Edit Window |
|---|
|
Image Modified |
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.
...
| Caption |
|---|
| 0 | Figure |
|---|
| 1 | Gw Sig Port Create Window |
|---|
|
Image Modified |
The following fields are displayed:
| Caption |
|---|
| 0 | Table |
|---|
| 1 | Gw Sig Port Parameters |
|---|
|
Parameter | Description |
|---|
Index
| Specify the index for gateway signaling port. | Ip Interface Group Name
| The name of the IP interface group used by this Signaling Port. | Ip Address
| Specifies the IP Address of the Gateway Signal Listen Port. This is V4 and V6 IP
address in dotted decimal form (for example 128.127.50.224). Default is 0.0.0.0. | Port Number
| The logical port number of the TCP port to use for this connection. Must be 1-65535, default is 2569. | Role
| The main role of the signaling port:
• primary(default)—the port that makes gateway signal link connection requests to other , using its IP address as the local address for listening.
• secondary—an alternate port that is used for listening only and cannot be used to establish new gateway signal links.
When no primary port exists, connection requests to other cannot be issued and calls which require them are disconnected.
When a secondary port is configured to be primary, the previous primary is automatically made secondary. | Mode
| The operational state of the Gateway signaling service:
• inService(default)—the signaling port listens for incoming gateway signal link connection requests.
• outofService—the signal port is not available for incoming gateway signal link connection requests and thus cannot be used to create a new gateway signal links to other . | State
| The administrative state of this gateway signaling port:
• disabled—Not active
• enabled—Active | IP Var | Metavariable name associated with the gateway signaling port IP address. This is used to configure gateway signaling IP address in Cloud . |
|
To Delete Gw Sig Port
To delete any of the created Gw Sig Port, click the radio button next to the specific Gw Sig Port which you want to delete.
...