Page History

The Software Install-/Upgrade window provides options to install or upgrade the SBC Applicationapplication.

The SBC supports the Upgrade Manager interface, which performs Live Software Upgrade (LSWU) on an HA pair without affecting the SBC services. The Upgrade Manager interface upgrades the SBC application on both the active and standby SBCs of the HA pair.

The Upgrade Manager interface:

• indicates the progress of current upgrade action, current upgrade state and the percentage of completion.
• allows you to perform a pre-upgrade check at any time when SBC is functional. It also instructs you to proceed with the upgrade or not based on the logs collected during the pre-upgrade checks.
• provides a clear indication of the step which failed during the upgrade process and leaves the SBC in a state where manual intervention is possible to complete the upgrade process. 

It also provides REST interface to external authentic clients and EMS to perform and monitor LSWU.

Complete SBC Application Package application package files are available on Salesforce for download from the Ribbon Support Portal. For more information on how to download the required SBC Application application files, refer to Downloading Software from the Ribbon Support Portal.

.

Once the files are downloaded to the local drive, use the File Upload option to upload these files to SBC. To know more about how to upload SBC Application Package files, refer to Refer to System Administration - File Upload.

Once the files are uploaded, they are available on Software the Software Install-/Upgrade window.

To View the SBC Application Package

On the SBC main screen, navigate to Administration > System Administration > Software Install-/Upgrade. The Software The Software Install/Upgrade window is displayed. The available packages are displayed under Packages panein the Packages panel.

The Packages panel provides the following information:

1. Most recent Live Software Upgrade:
   • Upgrade From - SBC version from which the upgrade happened.
   • Upgrade To - Current SBC version displayed by the application.
   • Date - Date and timestamp of the upgrade process.
   • Upgrade Status - Whether the upgrade was successful or failed.
2.  SBC application packages available for installation or upgrade.

To Install an SBC Application Package

To Install an SBC Application Packageapplication package:

1. In the Packages panel, select the package that you want to install.

   Caption
   0 Figure 1 Installation Package
   Image Removed

2. Click Install Software to continue with the installation.

   Caption
   0 Figure 1 Install Software
   Image Removed

3. The SBC validates the selected package. If the package and the contents are valid, the SBC provides additional fields to populate.

   Caption
   0 Figure 1 Verifying Software Package

4. Choose the type of SBC installation that you want to perform. The options are:

   • HA Pair

   • Standalone

     Caption
     0 Figure 1 Packages New Installation Options
     Image Modified Image Modified

5. For SBC hardware type of installation, choose SBC Type as I-SBC.
   For SBC Type, choose from the options listed:

   SBC Type	Description
   I-SBC	Specifies an Integrated Signaling and Media network element (I-SBC). This is applicable for an SBC on hardware environment (SBC 5000 Series, SBC 7000 Series, and SBC 5400).
   S-SBC	Specifies the SBC type as Signaling. The S-SBC (Signaling SBC) is applicable for SBC on SWe Cloud environment.
   M-SBC	Specifies SBC type as Media. The M-SBC (Media SBC) is applicable for SBC on cloud Swe Cloud environment.

   For more information on the value of each field and information for the installation procedure, refer to Installing SBC Application Using the ERE.

To Perform an Offline Upgrade of the SBC Application

To upgrade an SBC Application Package application package in offline mode:

1. In the Packages panel, select the package that you want to upgrade to.

   Caption

   0	Figure
   1	Upgrade Package

   Image Removed

2. Click Standalone Software Upgrade to continue with the upgrade.

   Caption
   0 Figure 1 Standalone Software Upgrade
   Image Removed

    

   The SBC validates the selected package.

   Caption0Figure1

   Standalone Software Upgrade Validation

   Image Removed

    

   Once the package is verified, the SBC displays the upgrade option.

   Caption
   0 Figure 1 Standalone Software Upgrade Window

3. Click Start Upgrade to start the Upgrade upgrade process. Refer Refer to Upgrading SBC Application using EMA Platform Mode for more details.

To Perform a Live Software Upgrade of the SBC Application

An LSWU is performed on an HA pair.

Prior to performing an LSWU using the Upgrade Manager interface, ensure:

• that the firmware versions on both active and standby SBCs are same. If the firmware versions are different, upgrade the firmware to the required version prior to performing an LSWU. For more information, refer to Upgrading Firmware.
• to download the correct SBC software bundle from Salesforce. Refer to Downloading Software from the Ribbon Support Portal to know more.
• to upload the SBC application files to both active and standby SBCs using the System Administration - File Upload option.
• to execute/start the LSWU process only on the current currently active SBC.

To upgrade an the SBC Application Package application package using LSWU:

1. In the Packages panel, select the package that you want to upgrade to.

   Caption0Figure1Upgrade Package

   Image Removed

2. Click Live Software Upgrade to continue with the upgrade.

   Caption
   0 Figure 1 Live Software Upgrade
   Image Removed

    

   The SBC validates the selected package.

   caption

   0	Figure
   1	Live Software Upgrade Validation

   Image Removed

    

   Once the package is verified, SBC displays the upgrade option.

   Caption
   0 Figure 1 Live Software Upgrade Window

3. (Optional) Click Perform Pre-Upgrade Checks.

   Perform

   Info
   title Note:
   The Prepre-Upgrade Checks upgrade checks can be performed anytime and , including outside the maintenance window too. These checks are performed to verify if the system is ready for an upgrade.
   Caption
   0	Figure
   1

   A Pre-Upgrade Checks

   Image Removed

   The Pre-Upgrade Checks Complete message is displayed once the verification is completed.

    

   Caption
   0 Figure 1 Performing Pre-Upgrade Checks

4. Once Pre-Upgrade checks are complete, click Start Upgrade to start the Upgrade upgrade process.

   Caption
   0 Figure 1 Start Live Upgrade
   Image Removed

   Info
   title Note:
   The LSWU initially starts on the standby SBC.

   
   The Software Upgrade panel displays the upgrade status.

   Caption
   0 Figure 1 LSWU Upgrade Status

   Info
   title Note:
   The complete LSWU process takes approximately 45 to 60 minutes. Refer Refer to Live Software Upgrade Using EMA for more details.

5. Once the upgrade is over complete on the standby SBC, the process starts over for the active SBC. The active SBC reboots in the process. Logon Log on in EMA platform mode to check the status.

6. Once When the LSWU process fully completes, a pop-up message "Live Upgrade Complete is displayed.

   Caption
   0 Figure 1 Live Upgrade Complete
   Image Removed

   Click OK to complete the process" is displayed, click OK.

To Delete an SBC Application Package

To delete an SBC Application Packageapplication package:

1. In the Packages panepanel, select the package that you want to delete.

   Caption

   0	Figure
   1	Delete Package

   Image Removed

2. Click Image Removed at the X at the right-end of the selected row to remove the package. A confirmation dialog box is displayed. 

   Caption
   0 Figure 1 Software Package Delete Confirmation
   Image Removed

3. Click Delete to confirm. The selected package is removed from the Packages paneConfirm the deletion when prompted.