Warning
Sonus-provided SFP/SFP+ modules must be used to guarantee proper operation of the external ports. Failure to follow this recommendation may cause permanent damage to the system.

Tooltip
tip Use ESD protective device

1 Gb SFP Parts

The 

Spacevars
0 series2

supports the following Small Form-factor Pluggable (SFP/SFP+) transceivers. SFPs (SFP/SFP+) are Customer Replaceable Units (CRU).

The following SFP transceivers are compatible with 

Spacevars
0 series2

Management ports:

Div
class pdf8pttext
Caption 0 Table 1 1Gb SFP Parts 3 1Gb SFP Parts Transceiver Type Product Code

Description

SFP Type

CopperSBC-SFPCOPPER-1GGIGE, 1000 BASE-T SMALL FROM PLUGGABLE (SFP)Must use one of the following: ManufacturerManufacturer Part Number AVAGO TECHNOLOGIESABCU-5710RZ-SN1 AVAGO TECHNOLOGIESABCU-5740RZ-SN1 BROADCOMABCU-5740RZ-SN1 FINISARFCLF8521P2BTL-SSSingle-mode fiberSBC-SFPSM-1G

Manufacturers  Part Number Wavelength  (nm) Tx Power (dBM) Rx Power (dBM) Description Multi-mode fiber SBC‐5XXXSFPMM   1G Ethernet MM AVAGO TECHNOLOGIES AFBR‐5715PZSN1, BROADCOM AFBR‐5715PZ‐SN1, FINISAR FTLF8519P2BNL‐SS, FINISAR  FTLF8519P3BNL‐SS 850 -9.5 (Min) -3 (Max) -17 (Min) 0 (Max) GIG-E, MULTIMODE, FIBER OPTIC TRANCEIVER

GIG-E, SINGLE MODE, FIBER OPTIC TRANSCEIVER

MODULE, LC, SMALL FORM PLUGGABLE (SFP),

10KM 1310NM, DMI

300M Single-mode fiber SBC‐5XXXSFPSM   1G Ethernet  SM AVAGO TECHNOLOGIES AFCT‐5715PZSN1, BROADCOM AFCT‐5715PZSN1, FINISAR FTLF1318P2BTL‐SS, FINISAR FTLF1318P3BTL‐SS 1310 -9.5 (Min) -3 (Max) -19 (Min) -3 (Max)

Must use one of the following: ManufacturerManufacturer Part Number AVAGO TECHNOLOGIESAFCT-5715PZ-SN1 BROADCOMAFCT-5715PZ-SN1 FINISARFTLF1318P2BTL-SS FINISARFTLF1318P3BTL-SSMulti-mode fiberSBC-5400-SFPMM

GIG-E,

MULTIMODE

SINGLE MODE, FIBER OPTIC

TRANCEIVER

TRANSCEIVER MODULE, LC, SMALL FORM PLUGGABLE (SFP),

300M

10KM 1310NM, DMI Copper SBC-5XXX-SFPCOPPER 1G Ethernet Copper   AVAGO TECHNOLOGIES ABCU-5740RZ-SN1, BROADCOM ABCU-5740RZ-SN1, FINISAR FCLF8521P2BTL-SS NA NA NA NA NA GIGE, 1000 BASE-T SMALL FROM PLUGGABLE (SFP)

Note
These numbers are taken from Vendor Datasheets as well as IEEE 802.3ae for the 1G parts.

10 Gb SFP Parts

Must use one of the following: ManufacturerManufacturer Part Number AVAGO TECHNOLOGIESAFBR-5715PZ-SN1 BROADCOMAFBR-5715PZ-SN1 FINISARFTLF8519P2BNL-SS FINISARFTLF8519P3BNL-SS

The following SFP+ transceivers are compatible with 

Spacevars
0 series2

Media and HA ports:

Div
class pdf8pttext
Caption 0 Table 1 10Gb SFP

+

Parts 3 10Gb SFP Parts Transceiver Type Product Code

DescriptionSingle-mode fiberSBC-SFPSM-10G10.3 GB/S, SINGLE MODE, FIBER OPTIC XCVR, LC, SFP, 10KM 1310NM, DMMust use one of the following: ManufacturerManufacturer Part Number AVAGO TECHNOLOGIESAFCT-709SMZ-SN1 AVAGO TECHNOLOGIESAFCT-739SMZ-SN1 BROADCOMAFCT-739SMZ-SN1 BROADCOMAFCT-709SMZ-SN1 FINISARFTLX1471D3BCL-SSMulti-mode fiberSBC-SFPMM-10G

SFP Type Manufacturers  Part Number Wavelength  (nm) Tx Power (dBM) Rx Power (dBM) Description Multi-mode fiber SBC‐SFPMM‐10G 10G Ethernet MM AVAGO TECHNOLOGIES AFBR‐709SMZSN1, BROADCOM AFBR‐709SMZ‐SN1,  FINISAR FTLX8571D3BCL‐SS, FINISARFTLX8574D3BCL‐SS 850 -7.9 (Min) -1 (Max) -11.1 (Min) 0.5 (Max) 10.3 GB/S, MULTIMODE, FIBER OPTIC XCVR, LC, SFP, 300M 850NM, DMI GIG-E, SINGLE MODE, FIBER OPTIC TRANSCEIVER MODULE

Must use one of the following:

Single-mode fiber SBC‐SFPSM‐10G

ManufacturerManufacturer Part Number AVAGO TECHNOLOGIESAFBR-709SMZ-SN1 BROADCOMAFBR-709SMZ-SN1 FINISARFTLX8574D3BCL-SS

10G Ethernet  SM AVAGO TECHNOLOGIES AFCT‐709SMZSN1, AVAGO TECHNOLOGIES AFCT739SMZ‐SN1, BROADCOM AFCT‐709SMZSN1, BROADCOM AFCT‐739SMZ‐SN1,  FINISAR FTLX1471D3BCL‐SS 1310 -8.2 (Min) 0.5 (Max) -12.6 (Min) 0.5 (Max) 10.3 GB/S, SINGLE MODE, FIBER OPTIC XCVR, LC, SFP, 10KM 1310NM, DM

Note
These numbers are taken from Vendor Datasheets as well as IEEE 802.3ae for the 10G parts.

 FINISARFTLX8571D3BCL-SS

Parts and Tools Required

Tooltip
tip ESD protective device

The following items are needed to install/replace a SFP/SFP+ device:

• Electrostatic discharge (ESD) strap
• Replacement SFP/SFP+ transceivers.

Include Page
ESD_wriststrap_7K ESD_wriststrap_7K

Replacing the SFP/SFP+

To replace the SFP/SFP+:

1. Attach an Electrostatic Discharge wrist strap by using the ESD grounding point on the back panel of the chassis. Follow the instructions in the section Connecting Electrostatic Discharge Wrist Strap on SBC 7000.
2. Disconnect the fiber optic and/or Cat 5 cables, as appropriate, from media ports (Media 0-4) and HA ports (HA 0-1).

3. Disengage the SFP/SFP+ transceiver from

   Spacevars
   0 series2

   . The method used to disengage the SFP/SFP+ transceiver will vary according to the manufacturer. For example, hold the wire latch and move it downwards to the horizontal position and pull it outwards.

4. Insert the Sonus-approved SFP/SFP+ transceiver into the desired socket and ensure that the latch mechanism engages.

5. Reconnect the fiber optic and/or Cat 5 cables, as appropriate, to media and HA ports.
6. Verify LEDs above the part are flashing indicating link status and data activity.

7. Verify port functionality by using the application.

CRU Storage

Tooltip
tip ESD protective device

All 

Spacevars
0 series2

CRUs are shipped in electrostatic discharge bags and should be handled using appropriate ESD precautions.

The storage environment for these CRUs are:

• Humidity must be less than 95% (non-condensing).
• Temperature must be between -40C and +70C.

 

Include Page
ESD_footnote ESD_footnote

Pagebreak