| Parameter | Description |
|---|
includeIpPortsInFromAndToHeaders | When enabled, port numbers are included with IP addresses in the From and To headers of SIP messages. When disabled, port numbers are not included with IP addresses. |
includeReasonHeader | When enabled, the includes the Reason header in 18x, 4xx, 5xx, Cancel, and Bye messages in the forward direction. It is provisioned on the egress trunk group. |
includeSsAttributeInInitialInvite | Enable this flag to send the 'a=silenceSupp:off' in the Initial Invite SDP to the remote peer when Silence Suppression is OFF. When disabled, 'a=silenceSupp' is not sent in the Initial Invite SDP to the remote peer. Note that 'a=silenceSupp:on' is never sent to the remote peer in the Sonus implementation when Silence Suppression is ON. |
includeTransportTypeInContactHeader | This flag is used by an configured for ERE or an external PSX.The uses this flag to control inclusion/exclusion of the Transport Type parameter in the Contact headers of 3XX responses. When When this flag is enabled, the includes the Transport Type parameter in the Contact headers of 3XX responses. The PSX sends the value of this flag in a DIAMETER response to the SBC.When this flag is disabled, the SBC does not include the Transport Type parameter when the selected transport is not UDP.The uses this flag to control inclusion/exclusion of the Transport Type parameter in the Contact headers of SIP requests and backward 2xx response messages when the selected transport is not UDP.NOTE: Ensure passcompletecontactHeader flag is disabled (except for the REGISTER method) to obtain the desired behavior. |
insertPAccessNetworkInfo | Enable flag to construct and send PANI with received location info. |
insertPeerAddressAsTopRouteHeader | When enabled, the SIPE inserts the IP address of the next hop in the top route header of the egress INVITE. This is required when the acts as a IMS BGCF proxy, and also supports SIPconnect compliance for direct inward dialing. |
insertUEFlowInfo | Enable flag to send P-UE-Flow-Info header towards core. |