...
Caption |
---|
0 | Table |
---|
1 | Numbering Plan Parameters |
---|
|
|
Parameter | Description |
---|
numberingPlan
| Specifies numbering plan. |
...
...
The numbering plans below are default plans, but you can also create your own numbering plans.
CHINA_NUM_PLAN GENERIC_NUM_PLAN GERMANY_NUM_PLAN INDIA_NUM_PLAN ITALY_NUM_PLAN JAPAN_NUM_PLAN MEXICO_NUM_PLAN NANP_ACCESS UK_NUM_PLAN
Note |
---|
The numbering plans above are default plans, but you can also create your own numbering plans. |
|
lengths
| The minimum and maximum lengths for various number types. areaCode exchangeCode line nationalNumber = subscriberNumber
Maximum and minimum values for above parameters:
max <#> – Enter maximum value. (range: 0-999 / default = 4).min <#> – Enter minimum value. (range: 0-999 / default = 4).
|
prefixProfile
| Prefix profile name. |
Prefix Profile Parameters
...
Caption |
---|
0 | Table |
---|
1 | Prefix Profile Parameters |
---|
|
|
Parameter | Description |
---|
prefixProfile
| Prefix profile name. Enter a profile name or select from list of |
...
...
profiles. CHINA_DIAL_PLAN GENERIC_DIAL_PLAN GERMANY_DIAL_PLAN ITALY_DIAL_PLAN INDIA_DIAL_PLAN JAPAN_DIAL_PLAN MEXICO_DIAL_PLAN NA_DIAL_PLAN UK_DIAL_PLAN
Note |
---|
The prefix profiles above are default profiles. You may also create your own prefix profiles. |
|
entry
| Use this object to configure the Prefix Profile using the parameters below. <matching pattern> – (up to 28 characters)<match start location> – 0<total min digits> – 3<total max digits> – 3applyDmRule – Enable to apply Dm/Pm Rule.callType – Select linear Call Type.- _
private (default) carrierCutThrough internationalOperator internationalType ipVpnService localOperator longDistanceOperator mobile nationalOperator nationalType otherCarrierChosen test transit userName
Note |
---|
Do not select _private option when provisioning Prefix Profile on ERE. Private call routing is not fully supported at this time. |
determineArea – When this flag is enabled, the area code is determined from the analyzed digits.digitType – Select digit type (default = unknown)
900PremiumToll | 950CarrierAccess | carrierAccess | directoryAssistance |
easilyIdentifiableNumber | emergency | governmentEmergency | ieps | international | internationalOperator | internetOffloadAnonymous |
internetOffloadEconomy | internetOffloadPremium | internetOffloadStandard | internetReception | ipVpn | localOperator | longDistanceOperator | national |
nationalOperator | noDigits | otherCarrierChosen | private | serviceAccessCode | subscriber | subscriberOperator | test | tollFree | transit | unknown | userName |
verticalServiceCode
dmPmRule – Dm/Pm Rule identifier:PAI_AND_FROM_HEADER PAI_DISPLAY_NAMES_1_NTL PAI_SIP_DSPNAME_CLG_NAM PAI_TEL_DSPNAME_GN_CPN PRFX_TO_HEADER_CDPN_NTL PRFX_TO_HEADER_GDPN_NTL PRFX_TO_HEADER_OCN_NTL SIP_ADD_PLUS SIP_REMOVE_CLG81 SIP_REMOVE_PLUS1 SIP_REMOVE_PLUS39 SIP_REMOVE_PLUS44 SIP_REMOVE_PLUS49 SIP_REMOVE_PLUS52 SIP_REMOVE_PLUS81 SIP_REMOVE_PLUS86 SIP_REMOVE_PLUS91
natureOfAddress – Nature Of Address. 950 (default) aniNotAvailableOrNotProvided aniOfCalledPartyNationalNumber aniOfCalledPartyNoNumberPresent aniOfCalledPartySubscriberNumber aniOfCallingPartyNationalNumber aniOfCallingPartySubscriberNumber anyapnNumberingPlan ignore international internationalNotRestricted internationalOperator internationalRestricted national nationalNotRestricted nationalOperator nationalRestricted networkSpecific noNumberCutThrough noNumberOperatorRequested none partialCallingLineId passThrough spare00...spare26 numberLeadingPrefixDigits <#> – Enter number of Leading Prefix Digits (range: 0-999 / default = 0).numberLeadingPrefixDigitsToStrip <#> – Enter number of Leading Prefix Digits To Strip (range: 0-999 / default = 0).numberingPlanIndicator – Numbering Plan Indicator.
data | ignore | isdn | none | offsetUnused | private | spare0Unknown | spare1 | spare2 | spare3 | spare4 | spare5 | spare6 | spare7 | telephony | telex
|
Command Example
Code Block |
---|
|
% show profiles digitParameterHandling
dmPmCriteria dmpm1 {
parameterPresenceCheck doesntExist;
}
dmPmRule rule1;
numberTranslationCriteria NTC none 2 2 3 4 {
lookupType enumSipAor;
}
numberingPlan CHINA_NUM_PLAN {
prefixProfile CHINA_DIAL_PLAN;
lengths {
nationalNumber {
min 8;
max 31;
}
subscriberNumber {
min 2;
max 7;
}
line {
min 4;
max 4;
}
exchangeCode {
min 3;
max 3;
}
areaCode {
min 2;
max 4;
}
}
} |
...