Overview
| Multiexcerpt include |
|---|
| MultiExcerptName | Application_layer_forking |
|---|
| PageWithExcerpt | SIP Forking Support |
|---|
|
Perform the following steps to configure call forking feature in the SBC:
| Anchor |
|---|
| Configuring AoR Group Profile |
|---|
| Configuring AoR Group Profile |
|---|
|
Configuring AoR Group Profile
Execute the following command to configure AoR Group Profile:
| Code Block |
|---|
% set profiles aorGroupProfile AR2 aorDataList sip:123@ss.com;1111;2222;user=phone,sip:456@yy.com;0;0;user=phone aorDialogAttribute useFirst18x
% commit |
| Anchor |
|---|
| Configuring the VOIP Subscriber |
|---|
| Configuring the VOIP Subscriber |
|---|
|
Configuring the VOIP Subscriber
| Code Block |
|---|
% set profiles voipSubscriber sip:EXAMPLE@RIBBON.com aorGroupProfile AR2 egressRURIAttribute aorEgress
% commit |
| Anchor |
|---|
| Configuring Routing for the AoR Group Profile |
|---|
| Configuring Routing for the AoR Group Profile |
|---|
|
Configuring Routing for the AoR Group Profile
To configure routing for the AoR Group Profile, refer to the section Basic Call Flow Using ERE.
| Anchor |
|---|
| Configuring Preferred Identity Parameter |
|---|
| Configuring Preferred Identity Parameter |
|---|
|
Configuring Preferred Identity and Wait for Answer Parameters (Optional)
| Code Block |
|---|
% set profiles aorGroupProfile AR2 preferredIdentity sip:123@ss.com waitForAnswer 0
% commit |
| Anchor |
|---|
| Enabling Preferred Identity in the SIP Trunk Group |
|---|
| Enabling Preferred Identity in the SIP Trunk Group |
|---|
|
Enabling Preferred Identity in the SIP Trunk Group (Optional)
| Code Block |
|---|
% set addressContext default zone defaultSigZone sipTrunkGroup TG1 policy preferredIdentity enable
% commit |
| Anchor |
|---|
| Viewing the Configuration |
|---|
| Viewing the Configuration |
|---|
|
Viewing the Configuration
To view the AoR Group profile, execute the following command:
| Code Block |
|---|
% show profiles aorGroupProfile AR2
aorDataList "sip:123@ss.com;1111;2222;user=phone sip:456@yy.com;0;0;user=phone";
preferredIdentity sip:123@ss.com;
aorDialogAttribute useFirst18x;
waitForAnswer 0;
[ok] |
To view the VOIP Subscriber, execute the following command:
| Code Block |
|---|
% show profiles voipSubscriber
voipSubscriber sip:EXAMPLE@RIBBON.COM {
aorGroupProfile AR1;
egressRURIAttribute aorEgress;
}
voipSubscriber sip:EXAMPLE@RIBBON.com {
aorGroupProfile AR2;
egressRURIAttribute aorEgress;
}
[ok] |
To view the the flag preferredIdentity in the SIP Trunk Group, execute the following command:
| Code Block |
|---|
> show table addressContext default zone defaultSigZone sipTrunkGroup TG1
carrier 0000;
country 1;
localizationVariant northAmerica;
tgIPVersionPreference both-ipv4-and-ipv6;
preferredIdentity enable;
digitParameterHandling {
numberingPlan NANP_ACCESS;
}
callRouting {
elementRoutingPriority DEFAULT_IP;
}
media {
packetServiceProfile DEFAULT;
}
services {
classOfService DEFAULT_IP;
}
signaling {
ipSignalingProfile DEFAULT_SIP;
}
featureControlProfile DEFAULT_IP;
ingress {
flags {
nonZeroVideoBandwidthBasedRoutingForSip enable;
nonZeroVideoBandwidthBasedRoutingForH323 disable;
hdPreferredRouting disable;
hdSupportedRouting disable;
}
}
[ok] |