Page History
| Add_workflow_for_techpubs | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
| Info | ||
|---|---|---|
| ||
Prior releases supported the use of a dedicated SBC Configurator cluster to configure other SBC SWe clusters. This approach is replaced by using one of the SBC nodes within the cluster, referred to as the "Headend" SBC, to configure the other nodes. While the SBC Configurator currently remains supported for backward compatibility, it will be deprecated in a subsequent release. Beginning with release 7.1, use the Headend SBC configuration model. Refer to Configuring an SBC SWe Cluster using the EMS. |
Use the Configurator window to review whether the SBC was launched as the Configurator in an SBC SWe cloud deployment. If the SBC is launched as the Configurator, then the IPv4 or IPv6 address of the Mgt0 interface is also displayed. If the SBC is not a Configurator then the IP address values are empty.
To access the Configurator window, use the following path from the EMA home page: All > System > Cluster Admin > Configurator
| Caption | ||||
|---|---|---|---|---|
| ||||
The following table lists the output on the Configurator window.
| Caption | ||||
|---|---|---|---|---|
| ||||
|
| Parameter | Description |
|---|---|
| Is Configurator | Indicates if the SBC was launched as the Configurator in an SBC SWe cloud deployment. The possible values are: false - the SBC was not launched as a Configurator. true - the SBC was launched as the Configurator in an SBC SWe cloud deployment. |
| Mgt0IP Address V4 | The Mgt0 interface IPv4 address. |
| Mgt0IP Address V6 | The Mgt0 interface IPv6 address. |
Overview
Content Tools