Page History

...

1. Launch EMA in platform mode. For more information on Platform mode login, see EMA Platform Mode - Login Window.

    

2. Select Administration > System Administration > Software Install/Upgrade tab.
   The Packages screen displays:

   Caption
   0 Figure 1 Packages

   Include Page
   Screenshot_disclaimer Screenshot_disclaimer

3. Select Package Name to install and click Install Software.
   The Install Software section expands and displays the Install Version, Management Ports (configured in post-OS installation) and System Configuration information:

   Caption
   0 Figure 1 Installing SBC Application

   Note
   The signature file of the SBC package verifies the integrity of the package contents before proceeding with the SBC installation.

4. Perform the steps to configure the system information:
   1. Select Standalone in the HA Configuration field.

   2. Enter a system name in the System Name field.

   3. Enter a local hostname in the Local Hostname field.

      Info
      For more information, see System Name and Hostname Conventions.

      Caption
      0 Figure 1 Installation Configuration

   4. Choose Active option for Server Role to designate the Active server as the one you are configuring.
   5. Keep default Active Primary CE IP.
   6. Keep default Standby Primary CE IP.
   7. Keep default Inter CE Prefix. The inter CE prefix is the netmask of the network in which the Inter CE IPs are configured.
   8. Use default TIPC NETID value (1500) if no other SBC SWe running in the same subnet.
   9. Select NTP Server IP field and enter the NTP server IP address.
   10. Select NTP Server Time Zone field and enter the NTP time zone.
5. Click Start Installation.
   The installation process starts and displays the installation status on the Installation Log section. After installing the application reboots and prompts you to login.

6. The installation process starts and displays the installation status on the Installation Log section.

   1. Perform pre-install checks

      Caption
      0 Figure 1 Pre-Install Checks

   2. Extract package contents

      Caption
      0 Figure 1 Extracting Package Contents

   3. Install SBC service

      Caption
      0 Figure 1 Installing SBC Service

      Note
      The installation checks whether ConnexIP OS version is compatible with the SBC application. If the OS upgrade is required, it performs the OS upgrade first and reboots the server. Once it is rebooted, login into the EMA again to continue with the SBC application.

   4. Initialize SBC service

      Caption
      0 Figure 1 Initialize SBC Service

   5. Update Host Name

      Caption
      0 Figure 1 Updating Host Name

   6. Reboot system

      Caption
      0 Figure 1 Rebooting the System

7. Log on to the application in EMA mode. For more information on EMA mode login, see EMA Mode - Login Window.
   The System Status screen displays:

   Caption
   0 Figure 1 System Status

   Include Page
   Screenshot_disclaimer Screenshot_disclaimer

8. Select Monitoring > Dashboard > System and Software Info.
   The System and Software Info screen displays:

   Caption
   0 Figure 1 System and Software Info

   Verify the interface configuration set during installation.

9. Select Administration > System Administration > Platform Management to verify the system status.

   Caption
   0 Figure 1 Verifying System Status

10. Install the required SBC licenses to use SBC application. For more information on licensing SBC, see Managing SBC Licenses for guidance.