Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Panel

...

...

Back to Table of Contents

Back to Configuring SBC for IMS

In this section:

Table of Contents
maxLevel4

...

...

...

Anchor
Configuring Realm Names under Address Context
Configuring Realm Names under Address Context
Configuring Realm Names under Address Context

Code Block
languagenone
set addressContext default realm Xa.operatorX.net connectedRealm Aa.operatorA.net.
set addressContext default realm Ya.operatorY.net connectedRealm Ba.operatorB.net.
Note

When configuring SBC to use OMR, realm must be configured. However, connectedRealm is optional.

Anchor
Configuring Ingress Realm Name at Ingress TG
Configuring Ingress Realm Name at Ingress TG
Configuring Ingress Realm Name at Ingress TG

Code Block
languagenone
set addressContext default zone SBX50_ZONE_INGRESS sipTrunkGroup SBX50_TG_INGRESS media omrPrimaryRealm Xa.operatorX.net

Anchor
Configuring Egress Realm Name at Egress TG
Configuring Egress Realm Name at Egress TG
Configuring Egress Realm Name at Egress TG

Code Block
languagenone
set addressContext default zone SBX50_ZONE_EGRESS sipTrunkGroup SBX50_TG_EGRESS media omrPrimaryRealm Ya.operatorY.net

Anchor
Enable OMR on Ingress TG
Enable OMR on Ingress TG
Enable OMR on Ingress TG

Code Block
languagenone
set addressContext default zone SBX50_ZONE_INGRESS sipTrunkGroup SBX50_TG_INGRESS media omrAllowed enabled
Code Block
languagenone
set addressContext default zone SBX50_ZONE_INGRESS sipTrunkGroupSBX50_TG_INGRESS media omrAllowed ravelCallOnly
Note

If the flag ravelCallOnly is enabled when originating call is identified to be RAVEL architecture compliant, that is, roaming and the initial INVITE contains "Feature-Caps" header with header field parameter +g.3gpp.trf or +g.3gpp.loopback, the OMR is applied to that call.

 

Anchor
Enable OMR on Egress TG
Enable OMR on Egress TG
Enable OMR on Egress TG

Code Block
languagenone
set addressContext default zone SBX50_ZONE_EGRESS sipTrunkGroup SBX50_TG_EGRESS media omrAllowed enabled
Code Block
languagenone
set addressContext default zone SBX50_ZONE_EGRESS sipTrunkGroupSBX50_TG_EGRESS media omrAllowed ravelCallOnly
Note

If the flag ravelCallOnly is enabled when originating call is identified to be RAVEL architecture compliant, that is, roaming and the initial INVITE contains "Feature-Caps" header with header field parameter +g.3gpp.trf or +g.3gpp.loopback, the OMR is applied to that call.

Anchor
Enable "Send Direct Media Info In SDP Attribute" in both Ingress and Egress IPSP
Enable "Send Direct Media Info In SDP Attribute" in both Ingress and Egress IPSP
Enable "Send Direct Media Info In SDP Attribute" in both Ingress and Egress IPSP

Caption
0Figure
1Enable Send Direct Media Info In SDP Attribute parameter

Image Modified

Anchor
Enable "Use Direct Media" in both Ingress and Egress PSP
Enable "Use Direct Media" in both Ingress and Egress PSP
Enable "Use Direct Media" in both Ingress and Egress PSP

Caption
0Figure
1Enable Use Direct Media parameter for Ingress and Egress TG
Image Modified

Anchor
Enable "Minimize Relaying of Media Changes From Other Leg" in both Ingress and Egress IPSP
Enable "Minimize Relaying of Media Changes From Other Leg" in both Ingress and Egress IPSP
Enable "Minimize Relaying of Media Changes From Other Leg" in both Ingress and Egress IPSP

Caption
0Figure
1Eanble Minimize Relaying of Media Changes From Other Leg parameter for Ingress and Egress TG

Image Modified 

Pagebreak