Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Updated Workflow, Admin override to Approve on Akshat's approval

Add_workflow_for_techpubs
AUTH1
JIRAIDAUTHSBX-70110
REV5
REV6
REV3
REV1

 

Perform the following steps to restore the

Spacevars
0product
configuration using CLI:

Multiexcerpt include
MultiExcerptNameSBC SWe Cloud restore limitation
PageWithExcerptSaving the SBC Configuration using CLI

  1. Log on to the remote server where you have copied the configuration files, as described in Saving the SBC Configuration.

  2. Execute the following commands to copy the files to your SBC system:

    Code Block
    languagenone
    titleExample
    % cd /home/bob/SBC01/config
    % sftp -oPort=2024 admin@SBC01a
    Connecting to SBC01a
    admin@10:54:19.17's password: xxxxxxx
    sftp> put config_SBC01_20170324_021127.tar.gz /var/log/sonus/sbx/config/
  3. To view the saved configuration files, use the following CLI command:

    Code Block
    languagenone
    titleExample
    admin@SBC01a> show table system savedConfigList 
    
    INDEX          FILE NAME                        SIZE         
    ----------------------------------------------------------
    1      config_SBC01_20170324_021127.tar.gz  1061 KBytes  
  4. Log on to SBC CLI, and load the configuration by executing the following CLI command:

    Code Block
    languagenone
    titleExample
    admin@SBC01a> request system admin SBC01 loadConfig fileName config_SBC01_20170324_021127.tar.gz
    This command will load the last saved configuration and restart the applications on active/standby servers. Do you want to continue (yes/no) y
    Proceeding
    result success
    reason Starting DB restoration from: config_<server name>_20170324_021127.tar.gz please check /var/log/messages for progress
    Warning
    This command will restart application on both the servers and is service impacting.
    Info
    iconfalse
    titleNote

    When reloading a saved configuration, make sure the standby server is stable or the server is reachable. If the standby is restarted or rebooted, wait until the server is stable before proceeding.

    If the standby system crashes before the load config completes, stop the standby server and allow the original active server to come back online as active.

     

     

Pagebreak